论文信息 - Novel first order all-pass sections using a single CCIII

Novel first order all-pass sections using a single CCIII

Two novel first order voltage-mode all-pass sections using a single third generation current conveyor (CCIII) are given. In addition the first circuit uses three resistors and one capacitor and the second circuit which is derived from the first circuit uses two resistors and one capacitor. A current-mode first order all-pass section requiring one capacitor and one resistor is also proposed. SPICE simulation results are incorporated to verify the theory.

Sudhanshu Maheshwari | Iqbal A. Khan | I. A. Khan | S. Maheshwari

[1] Ching-Ting Lee,et al. Systematic synthesis of R-L and C-D immittances using single CCIII , 2000 .

[2] Shen-Iuan Liu,et al. Higher-order immittance function synthesis using CCIIIs , 1996 .

[3] Alain Fabre. Third-generation current conveyor: a new helpful active element , 1995 .

[4] Kirat Pal. Realization of current conveyor all-pass networks , 1981 .

[5] Hakan Kuntman,et al. All-pass filters using a single current conveyor , 1999 .

[6] B. Wilson,et al. Recent developments in current conveyors and current-mode circuits , 1990 .

[7] A. Piovaccari. CMOS integrated third-generation current conveyor , 1995 .

[8] I. A. Khan,et al. Simple first order all-pass section using a single CCII , 2000 .

[9] Alain Fabre,et al. On the frequency limitations of the circuits based on second generation current conveyors , 1995 .

[10] Chun-Ming Chang,et al. Universal voltage-mode filter with four inputs and one output using two CCII s , 1999 .

[11] Iqbal A. Khan,et al. Multifunctional translinear-C current-mode filter , 2000 .

[12] Yutaka Fukui,et al. Research note Realization of all-pass networks using a current conveyor , 1988 .

[13] Ahmed M. Soliman,et al. Generation of current conveyor-based all-pass filters from op amp-based circuits , 1997 .