Control of Polymerization Processes

With an annual worldwide production well in excess of 100 million metric tons, synthetic polymers constitute a significant part of the modern chemical process industry. Polymer reactors - operated in continuous, batch, or semibatch mode - are therefore important processing units, but there are unique problems associated with controlling them effectively. The most significant characteristics of polymer reactors that make them one of the most challenging units to model, control, and optimize, are discussed in this chapter; we also provide a survey of the strategies that have been proposed, and those that have been successfully employed in industrial practice.

[1]  M. A. Latifi,et al.  Optimization and non-linear control of a batch emulsion polymerization reactor , 1999 .

[2]  Francis J. Doyle,et al.  Batch-to-batch control of characteristic points on the PSD in experimental emulsion polymerization , 2008 .

[3]  W. Harmon Ray,et al.  The dynamic behavior of continuous polymerization reactors—I: Isothermal solution polymerization in a CSTR , 1981 .

[4]  John F. MacGregor,et al.  Nonlinear product property control in industrial gas‐phase polyethylene reactors , 1993 .

[5]  Mohammad Shahrokhi,et al.  nonlinear temperature control of a batch suspension polymerization reactor , 2002 .

[6]  Dominique Bonvin,et al.  Adaptation strategies for real-time optimization , 2009, Comput. Chem. Eng..

[7]  F. Schork,et al.  On‐line measurement of surface tension and density with applications to emulsion polymerization , 1983 .

[8]  Francis J. Doyle,et al.  Polymer grade transition control using advanced real-time optimization software , 2004 .

[9]  J. Macgregor,et al.  On‐line inference of polymer properties in an industrial polyethylene reactor , 1991 .

[10]  Costas Kravaris,et al.  Nonlinear control of a batch polymerization reactor: An experimental study , 1992 .

[11]  Costas Kiparissides,et al.  Challenges in particulate polymerization reactor modeling and optimization: A population balance perspective , 2006 .

[12]  S. H. Bang,et al.  Iterative learning control of heat-up phase for a batch polymerization reactor☆ , 1996 .

[13]  Dominique Bonvin,et al.  Optimal Grade Transition in Industrial Polymerization Processes via NCO Tracking , 2007 .

[14]  W. H. Ray,et al.  The dynamic behaviour of continuous polymerization reactors—III: An experimental study of multiple steady states in solution polymerization , 1984 .

[15]  Dominique Bonvin,et al.  Real-Time Optimization of Batch Processes by Tracking the Necessary Conditions of Optimality , 2007 .

[16]  W. Ray.  Polynumerization reactor control , 1986, IEEE Control Systems Magazine.

[17]  Costas Kiparissides,et al.  On‐line monitoring of polymer quality in a batch polymerization reactor , 1986 .

[18]  W. Ray,et al.  The dynamic behavior of continuous polymerization reactors—II Nonisothermal solution homopolymerization and copolymerization in a CSTR , 1981 .

[19]  Dominique Bonvin,et al.  OPTIMISATION OF GRADE TRANSITIONS IN AN INDUSTRIAL GAS-PHASE OLEFIN POLYMERIZATION FLUIDIZED BED REACTOR VIA NCO TRACKING , 2005 .

[20]  Alexander Penlidis,et al.  ON-LINE SENSORS FOR POLYMERIZATION REACTORS , 1990 .

[21]  Masoud Soroush,et al.  Discrete‐time nonlinear controller synthesis by input/output linearization , 1992 .

[22]  C. Georgakis,et al.  Nonlinear model predictive control of end-use properties in batch reactors , 2002 .

[23]  Bala Srinivasan,et al.  OPTIMAL GRADE TRANSITION FOR POLYETHYLENE REACTORS VIA NCO TRACKING , 2005 .

[24]  C. Kravaris,et al.  Multivariable nonlinear control of a continuous polymerization reactor: An experimental study , 1993 .

[25]  W. Harmon Ray.  Modeling and Control of Polymerization Reactors , 1992 .

[26]  Masoud Soroush,et al.  Control of Product Quality in Polymerization Processes , 2002 .

[27]  Masoud Soroush,et al.  A method of robust multi-rate state estimation , 2003 .

[28]  Grégory François,et al.  Run-to-Run Adaptation of a Semiadiabatic Policy for the Optimization of an Industrial Batch Polymerization Process , 2004 .

[29]  Francis J. Doyle,et al.  Survey on iterative learning control, repetitive control, and run-to-run control , 2009 .

[30]  Babatunde A. Ogunnaike.  On-line modelling and predictive control of an industrial terpolymerization reactor , 1994 .

[31]  Veit Hagenmeyer,et al.  Flatness-based two-degree-of-freedom control of industrial semi-batch reactors using a new observation model for an extended Kalman filter approach , 2008, Int. J. Control.

[32]  A. J. Morris,et al.  Online optimizing control of molecular weight properties in batch free-radical polymerization reactors , 2002 .

[33]  Dominique Bonvin,et al.  Parametric sensitivity of path-constrained optimal control: Towards selective input adaptation , 2009, 2009 American Control Conference.