Bioinspired layered materials with superior mechanical performance.

Nature has inspired researchers to construct structures with ordered layers as candidates for new materials with high mechanical performance. As a prominent example, nacre, also known as mother of pearl, consists of a combination of inorganic plates (aragonite calcium carbonate, 95% by volume) and organic macromolecules (elastic biopolymer, 5% by volume) and shows a unique combination of strength and toughness. Investigations of its structure reveal that the hexagonal platelets of calcium carbonate and the amorphous biopolymer are alternatively assembled into the orderly layered structure. The delicate interface between the calcium carbonate and the biopolymer is well defined. Both the building blocks that make up these assembled layers and the interfaces between the inorganic and organic components contribute to the excellent mechanical property of natural nacre. In this Account, we summarize recent research from our group and from others on the design of bioinspired materials composed by layering various primitive materials. We focus particular attention on nanoscale carbon materials. Using several examples, we describe how the use of different combinations of layered materials leads to particular properties. Flattened double-walled carbon nanotubes (FDWCNTs) covalently cross-linked in a thermoset three-dimensional (3D) network produced the materials with the highest strength. The stiffest layered materials were generated from borate orthoester covalent bonding between adjacent graphene oxide (GO) nanosheets, and the toughest layered materials were fabricated with Al2O3 platelets and chitosan via hydrogen bonding. These new building blocks, such as FDWCNTs and GO, and the replication of the elaborate micro-/nanoscale interface of natural nacre have provided many options for developing new high performance artificial materials. The interface designs for bioinspired layered materials are generally categorized into (1) hydrogen bonding, (2) ionic bonding, and (3) covalent bonding. Using these different strategies, we can tune the materials to have specific mechanical characteristics such as high strength, excellent strain resistance, or remarkable toughness. Among these design strategies, hydrogen bonding affords soft interfaces between the inorganic plates and the organic matrix. Covalent cross-linking forms chemical bonds between the inorganic plates and the organic matrix, leading to much stronger interfaces. The interfaces formed by ionic bonding are stronger than those formed by hydrogen bonding but weaker than those formed by covalent bonding.

[1]  Lei Jiang,et al.  Ultratough artificial nacre based on conjugated cross-linked graphene oxide. , 2013, Angewandte Chemie.

[2]  A. Waas,et al.  Ultrastrong and Stiff Layered Polymer Nanocomposites , 2007, Science.

[3]  S. Stankovich,et al.  Preparation and characterization of graphene oxide paper , 2007, Nature.

[4]  H. Zeng,et al.  Calcium Carbonate Nanotablets: Bridging Artificial to Natural Nacre , 2012, Advanced materials.

[5]  A. P. Jackson,et al.  The mechanical design of nacre , 1988, Proceedings of the Royal Society of London. Series B. Biological Sciences.

[6]  L. Brinson,et al.  Bio‐Inspired Borate Cross‐Linking in Ultra‐Stiff Graphene Oxide Thin Films , 2011, Advanced materials.

[7]  Baohua Ji,et al.  Mechanical properties of nanostructure of biological materials , 2004 .

[8]  Ludwig J. Gauckler,et al.  Bioinspired Design and Assembly of Platelet Reinforced Polymer Films , 2008, Science.

[9]  G. Rutledge,et al.  Elastic Properties of a Single Lamella of Montmorillonite by Molecular Dynamics Simulation , 2004 .

[10]  Mark A. Locascio,et al.  Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvements. , 2008, Nature nanotechnology.

[11]  Sheng-Zhen Zu,et al.  The effect of interlayer adhesion on the mechanical behaviors of macroscopic graphene oxide papers. , 2011, ACS nano.

[12]  W. S. Hummers,et al.  Preparation of Graphitic Oxide , 1958 .

[13]  Zhiyong Tang,et al.  Nanostructured artificial nacre , 2003, Nature materials.

[14]  G. Sui,et al.  Effects of heat treatment on the mechanical properties of Kevlar-29 fibre , 2000 .

[15]  R. Ritchie,et al.  Tough, Bio-Inspired Hybrid Materials , 2008, Science.

[16]  Zhiyong Tang,et al.  Can nature's design be improved upon? High strength, transparent nacre-like nanocomposites with double network of sacrificial cross links. , 2008, The journal of physical chemistry. B.

[17]  Lei Jiang,et al.  Synergistic toughening of bioinspired poly(vinyl alcohol)-clay-nanofibrillar cellulose artificial nacre. , 2014, ACS nano.

[18]  K. Kawamura,et al.  Molecular Simulation for Flexibility of a Single Clay Layer , 2001 .

[19]  M. Meyers,et al.  Structural Biological Materials: Critical Mechanics-Materials Connections , 2013, Science.

[20]  Weiwei Cai,et al.  Graphene oxide papers modified by divalent ions-enhancing mechanical properties via chemical cross-linking. , 2008, ACS nano.

[21]  Chao Gao,et al.  Multifunctional, supramolecular, continuous artificial nacre fibres , 2012, Scientific Reports.

[22]  Jiachun Feng,et al.  Realizing Ultrahigh Modulus and High Strength of Macroscopic Graphene Oxide Papers Through Crosslinking of Mussel‐Inspired Polymers , 2013, Advanced materials.

[23]  D. Dikin,et al.  Graphene Oxide Sheets Chemically Cross-Linked by Polyallylamine , 2009 .

[24]  T. Belytschko,et al.  Computational Studies of the Structure, Behavior upon Heating, and Mechanical Properties of Graphite Oxide , 2007 .

[25]  Chuck Zhang,et al.  Highly conductive carbon nanotube buckypapers with improved doping stability via conjugational cross-linking , 2011, Nanotechnology.

[26]  R. Hearmon,et al.  The Elastic Constants of Anisotropic Materials , 1946 .

[27]  John D. Currey,et al.  Mechanical properties of mother of pearl in tension , 1977, Proceedings of the Royal Society of London. Series B. Biological Sciences.

[28]  L. Brinson,et al.  High‐Nanofiller‐Content Graphene Oxide–Polymer Nanocomposites via Vacuum‐Assisted Self‐Assembly , 2010 .

[29]  S AnnaTampieriSimoneSprioMonica,et al.  Bio-inspired hybrid materials with smart functionalities for regenerative medicine , 2015 .

[30]  Chao Gao,et al.  Liquid crystal self-templating approach to ultrastrong and tough biomimic composites , 2013, Scientific Reports.

[31]  Lei Jiang,et al.  Bioinspired Layered Composites Based on Flattened Double‐Walled Carbon Nanotubes , 2012, Advanced materials.

[32]  Francois Barthelat,et al.  Merger of structure and material in nacre and bone - Perspectives on de novo biomimetic materials , 2009 .

[33]  S. Kotha,et al.  Micromechanical model of nacre tested in tension , 2001 .

[34]  Tianyi Yang,et al.  Bio‐Inspired Nacre‐like Composite Films Based on Graphene with Superior Mechanical, Electrical, and Biocompatible Properties , 2012, Advanced materials.