Task Specific Uncertainty in Coordinate Measurement

[1]  Wolfgang Knapp,et al.  Test of the Three-Dimensional Uncertainty of Machine Tools and Measuring Machines and Its Relation to the Machine Errors , 1983 .

[2]  E. Saljé,et al.  On Testing Coordinate Measuring Machines (CMM) with Kinematic Reference Standards (KRS) , 1983 .

[3]  Marek Kowalski,et al.  The Investigations on Selected Dynamical Phenomena in the Heads of Multi-Coordinate Measuring Devices , 1984 .

[4]  W. DeVries,et al.  Algorithms to Deconvolve Stylus Geometry From Surface Profile Measurements , 1985 .

[5]  Ralph C. Veale,et al.  Error Compensation of Coordinate Measuring Machines , 1985 .

[6]  L. Nawara,et al.  Influence of the Multicoordinate Measuring Machine Head Characteristic on Circular Profiles Measurements , 1985 .

[7]  M. Raugh.  Absolute two-dimensional sub-micron metrology for electron beam lithography: A calibration theory with applications☆ , 1985 .

[8]  A. Weckenmann,et al.  Problems with software for running coordinate measuring machines: The use of virtual volumetric standards , 1985 .

[9]  F. Jouy,et al.  Theoretical Modelisation and Experimental Identification of the Geometrical Parameters of Coordinate-Machines by Measuring a Multi-Directed Bar , 1986 .

[10]  Enrico Canuto,et al.  Coordinate Measuring Machines and Machine Tools Selfcalibration and Error Correction , 1987 .

[11]  L. Nawara,et al.  Analysis of the Random Component of Multicoordinate Measuring Machines and Metrological Robots Position Error , 1987 .

[12]  B. Lu,et al.  A Displacement Method for Machine Geometry Calibration , 1988 .

[13]  A.C.H. van der Wolf,et al.  A General Method for Error Description of CMMs Using Polynomial Fitting Procedures , 1989 .

[14]  T. Fearn,et al.  Bayesian statistics : principles, models, and applications , 1990 .

[15]  James B. Bryan,et al.  International Status of Thermal Error Research (1990) , 1990 .

[16]  A. Balsamo,et al.  A Method for Thermal-Deformation Corrections of CMMs , 1990 .

[17]  N. Anbari,et al.  The Influence of Surface Roughness in Dependence of the Probe Ball Radius with Measuring the Actual Size , 1990 .

[18]  H. Kunzmann,et al.  A Uniform Concept for Calibration, Acceptance Test, and Periodic Inspection of Coordinate Measuring Machines Using Reference Objects , 1990 .

[19]  E Trapet,et al.  A reference object based method to determine the parametric error components of coordinate measuring machines and machine tools , 1991 .

[20]  Pierre Bourdet,et al.  Elimination of Geometrical Errors by Permutations – Application to a Rotary Table , 1991 .

[21]  E. G. Thwaite,et al.  Length-Bar and Step-Gauge Calibration Using a Laser Measurement System with a Coordinate Measuring Machine , 1991 .

[22]  K. H. Breyer,et al.  Paving the Way to Thermally Stable Coordinate Measuring Machines , 1991 .

[23]  Neil A. Duffie,et al.  Uncertainties in the Acquisition and Utilization of Coordinate Frames in Manufacturing Systems , 1991 .

[24]  H Han Haitjema.  Uncertainty propagation in Surface Plate measurements , 1992 .

[25]  P. Bourdet,et al.  Effects of data point distribution and mathematical model on finding the best-fit sphere to data , 1993 .

[26]  Tony C. Woo,et al.  Dimensional measurement of surfaces and their sampling , 1993, Comput. Aided Des..

[27]  H. Kunzmann,et al.  Concept for the Traceability of Measurements with Coordinate Measuring Machines , 1993 .

[28]  Steven D. Phillips,et al.  Measurement uncertainty considerations for coordinate measuring machines , 1993 .

[29]  Barry N. Taylor,et al.  Guidelines for Evaluating and Expressing the Uncertainty of Nist Measurement Results , 2017 .

[30]  G. Spur,et al.  Task-Specific Gauge for the Inspection of Coordinate Measuring Machines , 1994 .

[31]  Jean-Pierre Kruth,et al.  Self-calibration method and software error correction for three dimensional coordinate measuring machines using artefact measurements , 1994 .

[32]  Ted Hopp,et al.  The Sensitivity of Three-Point Circle Fitting , 1994 .

[33]  D. A. Swyt.  Uncertainties in Dimensional Measurements Made at Nonstandard Temperatures , 1994, Journal of research of the National Institute of Standards and Technology.

[34]  H. Weber,et al.  Functionality-oriented evaluation and sampling strategy in coordinate metrology , 1995 .

[35]  Mark S. Levenson,et al.  Performance Measures for Geometric Fitting in the NIST Algorithm Testing and Evaluation Program for Coordinate Measurement Systems , 1995, Journal of research of the National Institute of Standards and Technology.

[36]  H. Kunzmann,et al.  Results of the international comparison of ball plate measurements in CIRP and WECC , 1995 .

[37]  P. A. McKeown,et al.  Reduction and compensation of thermal errors in machine tools , 1995 .

[38]  S. Sartori,et al.  Geometric Error Measurement and Compensation of Machines , 1995 .

[39]  Robert J. Hocken,et al.  Self-Calibration: Reversal, Redundancy, Error Separation, and ‘Absolute Testing’ , 1996 .

[40]  S. Sartori,et al.  Towards Instrument-Oriented Calibration of CMMs , 1996 .

[41]  H Han Haitjema.  Iterative solution of least-squares problems applied to flatness and grid measurements , 1996 .

[42]  Seung-Woo Kim,et al.  Measurement Uncertainty Limit of a Video Probe in Coordinate Metrology , 1996 .

[43]  Steven D. Phillips,et al.  Error compensation for CMM touch trigger probes , 1996 .

[44]  P. Ciarlini,et al.  Advanced Mathematical Tools in Metrology III , 1997 .

[45]  Steven D. Phillips,et al.  Practical aspects of touch-trigger probe error compensation , 1997 .

[46]  William T. Estler,et al.  The Calculation of CMM Measurement Uncertainty via The Method of Simulation by Constraints | NIST , 1997 .

[47]  A. Balsamo,et al.  Results of the CIRP-Euromet Intercomparison of Ball Plate-Based Techniques for Determining CMM Parametric Errors , 1997 .

[48]  Hans Nørgaard Hansen,et al.  A combined optical and mechanical reference artefact for coordinate measuring machines. , 1997 .

[49]  Steven D. Phillips,et al.  Guidelines for Expressing the Uncertainty of Measurement Results Containing Uncorrected Bias , 1997, Journal of research of the National Institute of Standards and Technology.

[50]  W. G. Weekers,et al.  Compensation for dynamic errors of coordinate measuring machines , 1997 .

[51]  A. Weckenmann,et al.  The Influence of Measurement Strategy on the Uncertainty of CMM-Measurements , 1998 .

[52]  Paulo Augusto Cauchick Miguel,et al.  A review on methods for probe performance verification , 1998 .

[53]  W. Estler,et al.  The estimation of measurement uncertainty of small circular features measured by coordinate measuring machines , 1998 .

[54]  T. Kurfess,et al.  Sampling uncertainty in coordinate measurement data analysis , 1998 .

[55]  R. Wilhelm,et al.  Adaptive sampling for coordinate metrology , 1999 .

[56]  H. Kunzmann,et al.  Results of the CIRP-Form Intercomparison 1996–1998 , 1999 .

[57]  Jean-Pierre Kruth,et al.  A parametric model for compensation of the temperature dependent geometry of a coordinate measuring machine , 1999 .

[58]  W. Estler.  Measurement as Inference: Fundamental Ideas , 1999 .

[59]  Hans Nørgaard Hansen,et al.  An industrial comparison of coordinate measuring machines in Scandinavia with focus on uncertainty statements , 1999 .

[60]  Gustav J. Olling,et al.  Machining Impossible Shapes , 1999, IFIP — The International Federation for Information Processing.

[61]  K. D. Summerhays,et al.  Methods for evaluation of systematic geometric deviations in machined parts and their relationships to process variables , 1999 .

[62]  Alessandro Balsamo,et al.  Evaluation of CMM Uncertainty Through Monte Carlo Simulations , 1999 .

[63]  A B Forbes,et al.  Simulated instruments and uncertainty estimation. , 2000 .

[64]  Leonardo De Chiffre,et al.  Development and validation of a new reference cylindrical gear for pitch measurement , 2000 .

[65]  H. Kunzmann,et al.  Assessment of Uncertainties in Dimensional Metrology by Monte Carlo Simulation: Proposal of a Modular and Visual Software , 2000 .

[66]  H Han Haitjema,et al.  The concept of a virtual roughness tester , 2000 .

[67]  Robert J. Hocken,et al.  Illumination model and plate calibration method for vision-based coordinate measuring machines , 2000 .

[68]  Franco Pavese,et al.  Advanced Mathematical and Computational Tools in Metrology IV , 2000 .

[69]  Jean-Pierre Kruth,et al.  Coorecting steady-state temperature influences on coordinate measuring machines , 2001 .

[70]  F.L.M. Delbressine,et al.  CALCULATION OF MEASUREMENT UNCERTAINTY FOR MULTI-DIMENSIONAL MACHINES, USING THE METHOD OF SURROGATE DATA , 2001 .

[71]  H Han Haitjema,et al.  Virtual CMM using Monte Carlo methods based on frequency content of the error signal , 2001, Lasers in Metrology and Art Conservation.

[72]  H Han Haitjema,et al.  Uncertainty estimation by the concept of virtual instruments , 2001, Lasers in Metrology and Art Conservation.

[73]  T. A. Clarke,et al.  Performance Verification For Large Volume Metrology Systems , 1970 .

[74]  Alistair B. Forbes,et al.  USE OF MONTE CARLO SIMULATION FOR UNCERTAINTY EVALUATION IN METROLOGY , 2001 .