Structural and property changes during uniaxial drawing of ethylene–tetrafluoroethylene copolymer films as analyzed by in-situ X-ray measurements

[1]  K. Tashiro,et al.  Influence of third monomer on the crystal phase transition behavior of ethylene-tetrafluoroethylene copolymer , 2008 .

[2]  Yutaka Ohkoshi,et al.  Initial stage of fiber structure development in the continuous drawing of poly(ethylene terephthalate) , 2008 .

[3]  I. Šics,et al.  New Insights into Lamellar Structure Development and SAXS/WAXD Sequence Appearance during Uniaxial Stretching of Amorphous Poly(ethylene terephthalate) above Glass Transition Temperature , 2008 .

[4]  S. Sasaki,et al.  In situ SAXS analysis of extended-chain crystallization during melt-drawing of ultra-high molecular weight polyethylene , 2007 .

[5]  H. Uehara,et al.  Oriented Crystallization Induced by Uniaxial Drawing from Poly(tetrafluoroethylene) Melt , 2007 .

[6]  S. Gribanov,et al.  Straight-Chain Segment Length Distributions in UHMWPE Reactor Powders of Different Morphological Types , 2007 .

[7]  Koh Nakamura,et al.  Ultradrawing above the static melting temperature of ultra-high molecular weight isotactic poly(1-butene) having low ductility in the crystalline state , 2007 .

[8]  Syozo Murakami,et al.  Transient crystallization during drawing from ultra-high molecular weight polyethylene melts having different entanglement characteristics , 2006 .

[9]  H. Uehara,et al.  Continuous Film Processing from Ultrahigh-Molecular-Weight Polyethylene Reactor Powder and Mechanical Property Development by Melt Drawing , 2006 .

[10]  S. Hyon,et al.  Crystal transformation and development of tensile properties upon drawing of poly(L-lactic acid) by solid-state coextrusion : Effects of molecular weight , 2006 .

[11]  Yuzo Yamamoto,et al.  High-performance polypropylene film prepared from reactor powders having different characteristics , 2006 .

[12]  Syozo Murakami,et al.  Effects of molecular characteristics and processing conditions on melt‐drawing behavior of ultrahigh molecular weight polyethylene , 2006 .

[13]  H. Uehara,et al.  Remnant Features in Melt Crystallized Samples of Polyethylenes Originated from Reactor Powders , 2006 .

[14]  Syozo Murakami,et al.  Phase Development Mechanism during Drawing from Highly Entangled Polyethylene Melts , 2006 .

[15]  D. Sawai,et al.  Development of oriented morphology and tensile properties upon superdawing of solution-spun fibers of ultra-high molecular weight poly(acrylonitrile) , 2006 .

[16]  I. Šics,et al.  Superstructure Evolution in Poly(ethylene terephthalate) during Uniaxial Deformation above Glass Transition Temperature , 2006 .

[17]  B. Wunderlich,et al.  The link between rigid amorphous fraction and crystal perfection in cold-crystallized poly(ethylene terephthalate) , 2005 .

[18]  I. Šics,et al.  Mechanism of structural formation by uniaxial deformation in amorphous poly(ethylene terephthalate) above the glass temperature , 2003 .

[19]  R. Porter,et al.  Structure Development upon Melt Drawing of Ultrahigh Molecular Weight Polyethylene: Effect of Prior Thermal History , 2000 .

[20]  R. Porter,et al.  Melt drawing of ultra‐high molecular weight polyethylene: Comparison of Ziegler‐ and metallocene‐catalyzed reactor powders , 1999 .

[21]  R. Porter,et al.  Melt Drawability of Ultrahigh Molecular Weight Polyethylene , 1999 .

[22]  R. Porter,et al.  Uniaxial drawing of polytetrafluoroethylene virgin powder by extrusion plus cold tensile draw , 1998 .

[23]  R. Porter,et al.  High Modulus Films of Polytetrafluoroethylene Prepared by Two-Stage Drawing of Reactor Powder , 1997 .

[24]  Syozo Murakami,et al.  Real-Time X-Ray Diffraction Study on Two-Stage Drawing of Ultra-High Molecular Weight Polyethylene Reactor Powder above the Static Melting Temperature , 1996 .

[25]  R. Pucciariello.  Melting behavior of ethylene–tetrafluoroethylene alternating copolymer , 1996 .

[26]  K. Miyasaka,et al.  Structural studies on ethylene-tetrafluoroethylene copolymer: 2. Transition from crystal phase to mesophase , 1986 .

[27]  K. Miyasaka,et al.  Structural studies on ethylene‐tetrafluoroethylene copolymer: III. Deformation mechanism of row‐crystallized film , 1986 .

[28]  Masazumi Ishikawa,et al.  Structural studies on ethylene-tetrafluoroethylene copolymer 1. Crystal structure , 1986 .

[29]  D. Sawai,et al.  Maximum tensile properties of oriented polyethylene, achieved by uniaxial drawing of solution‐grown crystal mats: Effects of molecular weight and molecular weight distribution , 2006 .

[30]  Syozo Murakami.  Development of Heating/Drawing Device for in situ X-Ray Diffraction Measurement of Polymer Films during Uniaxial Drawing. , 2000 .

[31]  Y. Yamazaki,et al.  Tensile properties of highly syndiotactic polypropylene , 1996 .