A New Method to Analyze Distortion Product Otoacoustic Emissions (DPOAEs) in the High-Frequency Range Up to 18 kHz Using Windowed Periodograms

Distortion product otoacoustic emissions (DPOAEs) are widely used as an objective examination procedure to determine cochlear function. In a clinical routine setting, the amplitude of the DPOAE signal at 2f1-f2 is applied as an indicator for a potential hearing loss up to 8 kHz. Due to their poor signal-to-noise ratio, meatal nodes from standing waves and calibration issues, high-frequency DPOAEs >; 8 kHz have hardly been addressed in experimental and clinical audiology so far. Here, we present a new method of measuring DPOAE signal levels based on optimal maximum likelihood estimation with windowed power spectral density estimation of stochastic signals and filtering theory. Analysis of simulated data showed that the proposed method effectively reduces the disturbing noise floor compared to conventional averaging techniques. Robust DPOAE signals were measured in 20 ears from ten normally hearing young adults (21-27 years) from 0.5 to 18 kHz . Repeated DPOAE recordings in one individual yielded a good to very good test-retest reliability of the proposed method. These observations are discussed in the context of DPOAE signal processing and possible clinical applications of high-frequency DPOAE measurements.

[1]  Walt Jesteadt,et al.  High-frequency click-evoked otoacoustic emissions and behavioral thresholds in humans. , 2009, The Journal of the Acoustical Society of America.

[2]  Kurths,et al.  Phase synchronization of chaotic oscillators. , 1996, Physical review letters.

[3]  J H Siegel,et al.  Distortion-product otoacoustic emissions measured at high frequencies in humans. , 2001, The Journal of the Acoustical Society of America.

[4]  R H Wilson,et al.  High‐Frequency Audiometric Monitoring Strategies for Early Detection of Ototoxicity , 1994, Ear and hearing.

[5]  D. Kemp,et al.  Otoacoustic emissions, their origin in cochlear function, and use. , 2002, British medical bulletin.

[6]  Alireza K. Ziarani,et al.  A novel method of estimation of DPOAE signals , 2004, The 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[7]  Steven Kay,et al.  Modern Spectral Estimation: Theory and Application , 1988 .

[8]  Denis F. Fitzpatrick,et al.  Detecting high-frequency hearing loss with click-evoked otoacoustic emissions. , 2011, The Journal of the Acoustical Society of America.

[9]  N. R. Goodman.  Statistical analysis based on a certain multivariate complex Gaussian distribution , 1963 .

[10]  Peter Torre,et al.  Risk factors for distortion product otoacoustic emissions in young men with normal hearing. , 2007, Journal of the American Academy of Audiology.

[11]  Kaushik Roy,et al.  Frequency domain analysis of switching noise on power supply network , 2000, IEEE/ACM International Conference on Computer Aided Design. ICCAD - 2000. IEEE/ACM Digest of Technical Papers (Cat. No.00CH37140).

[12]  D. Kemp.  Stimulated acoustic emissions from within the human auditory system. , 1978, The Journal of the Acoustical Society of America.

[13]  Laura Elizabeth Dreisbach,et al.  Repeatability of High-Frequency Distortion-Product Otoacoustic Emissions in Normal-Hearing Adults , 2006, Ear and hearing.

[14]  D. T. Kemp,et al.  Evidence of mechanical nonlinearity and frequency selective wave amplification in the cochlea , 2004, Archives of oto-rhino-laryngology.

[15]  M. Powers,et al.  An Interactive Software Module for DPOAE Signal Estimation , 2006, 2006 International Conference of the IEEE Engineering in Medicine and Biology Society.

[16]  Thomas Janssen,et al.  Impact of occupational noise on pure-tone threshold and distortion product otoacoustic emissions after one workday , 2008, Hearing Research.

[17]  Yuan-Ting Zhang,et al.  Estimation of distortion product otoacoustic emissions , 1999, IEEE Transactions on Biomedical Engineering.

[18]  Gerald R. Popelka,et al.  Growth of distortion product otoacoustic emissions with primary-tone level in humans , 1993, Hearing Research.

[19]  Özcan Özdamar,et al.  Adaptive noise cancellation in a multimicrophone system for distortion product otoacoustic emission acquisition , 2000, IEEE Transactions on Biomedical Engineering.

[20]  J. H. Siegel,et al.  Sound calibration and distortion product otoacoustic emissions at high frequencies , 1994, Hearing Research.

[21]  P. Welch.  The use of fast Fourier transform for the estimation of power spectra: A method based on time averaging over short, modified periodograms , 1967 .

[22]  Wing-Kin Ma,et al.  Optimum estimation and detection of distortion product otoacoustic emissions in white Gaussian noise , 1998, Proceedings of the 20th Annual International Conference of the IEEE Engineering in Medicine and Biology Society. Vol.20 Biomedical Engineering Towards the Year 2000 and Beyond (Cat. No.98CH36286).

[23]  S A Fausti,et al.  The effects of noise upon human hearing sensitivity from 8000 to 20 000 Hz. , 1981, The Journal of the Acoustical Society of America.

[24]  L. Sörnmo,et al.  Sampling rate and the estimation of ensemble variability for repetitive signals , 2006, Medical and Biological Engineering and Computing.

[25]  J. Guinan,et al.  Evoked otoacoustic emissions arise by two fundamentally different mechanisms: a taxonomy for mammalian OAEs. , 1999, The Journal of the Acoustical Society of America.

[26]  S Nishida,et al.  Spectral properties of signal averaging and a novel technique for improving the signal-to-noise ratio. , 1989, Journal of biomedical engineering.

[27]  U Hoppe,et al.  Determination of acute noise effects using distortion product otoacoustic emissions. , 1999, Scandinavian audiology.

[28]  R Neitzel,et al.  Predictors of hearing threshold levels and distortion product otoacoustic emissions among noise exposed young adults , 2004, Occupational and Environmental Medicine.