Evaluating Gas Turbine Performance Using Machine-Generated Data: Quantifying Degradation and Impacts of Compressor Washing

[1]  Lars E. Bakken,et al.  Online Water Wash Tests of GE J85-13 , 2005 .

[2]  Uyioghosa Igie,et al.  Impact of Inlet Filter Pressure Loss on Single and Two-Spool Gas Turbine Engines for Different Control Modes , 2014 .

[3]  Francisco Gonzalez,et al.  A study of on-line and off-line turbine washing to optimize the operation of a gas turbine , 2005 .

[4]  Klaus Brun,et al.  Degradation Effects on Industrial Gas Turbines , 2009 .

[5]  Christoph Pels Leusden,et al.  Performance Benefits Using Siemens Advanced Compressor Cleaning System , 2004 .

[6]  Ernst Schneider,et al.  Analysis of Compressor On-Line Washing to Optimize Gas Turbine Power Plant Performance , 2010 .

[7]  Lars E. Bakken,et al.  Gas Turbine Operation Offshore: On-Line Compressor Wash at Peak Load , 2003 .

[8]  Tom Hynes,et al.  Influence of Surface Roughness on Three-Dimensional Separation in Axial Compressors , 2004 .

[9]  Meherwan P. Boyce,et al.  Gas turbine engineering handbook , 1981 .

[10]  Klaus Brun,et al.  Degradation in Gas Turbine Systems , 2001 .

[11]  Pericles Pilidis,et al.  Industrial Gas Turbine Performance: Compressor Fouling and On-Line Washing , 2014 .

[12]  Michele Pinelli,et al.  Computational Fluid Dynamics Simulation of Fouling on Axial Compressor Stages , 2010 .

[13]  Ihor S. Diakunchak.  Performance Deterioration in Industrial Gas Turbines , 1992 .

[14]  Olav Bolland,et al.  Measured Data Correction for Improved Fouling and Degradation Analysis of Offshore Gas Turbines , 2004 .

[15]  W. B. Roberts,et al.  The effect of adding roughness and thickness to a transonic axial compressor rotor , 1994 .