Machining of β-titanium-alloy Ti–10V–2Fe–3Al under cryogenic conditions: Cooling with carbon dioxide snow

[1]  Michael Field,et al.  Procedures and Precautions in Machining Titanium Alloys , 1973 .

[2]  R. Komanduri.  Some clarifications on the mechanics of chip formation when machining titanium alloys , 1982 .

[3]  Ranga Komanduri,et al.  Evaluation of carbide grades and a new cutting geometry for machining titanium alloys , 1983 .

[4]  M. Donachie.  Titanium: A Technical Guide , 1988 .

[5]  Rodney R. Boyer,et al.  New titanium applications on the Boeing 777 airplane , 1992 .

[6]  R. Wertheim,et al.  Influence of High-pressure Flushing through the Rake Face of the Cutting Tool , 1992 .

[7]  Rodney R. Boyer,et al.  Issues in the development of beta titanium alloys , 1994 .

[8]  R. Boyer.  An overview on the use of titanium in the aerospace industry , 1996 .

[9]  E. Hering,et al.  Physik für Ingenieure , 1997 .

[10]  A. Jawaid,et al.  Tool wear characteristics in turning of titanium alloy Ti-6246 , 1999 .

[11]  A. Senthil Kumar,et al.  Identification of Effective Zones for High Pressure Coolant in Milling , 2000 .

[12]  L. N. López de Lacalle,et al.  Advanced cutting conditions for the milling of aeronautical alloys , 2000 .

[13]  Shane Y. Hong,et al.  Friction and cutting forces in cryogenic machining of Ti–6Al–4V , 2001 .

[14]  Shane Y. Hong,et al.  Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4V , 2001 .

[15]  Shane Y. Hong,et al.  New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V , 2001 .

[16]  Manfred Peters,et al.  Titan und Titanlegierungen , 2002 .

[17]  E. Ezugwu,et al.  An overview of the machinability of aeroengine alloys , 2003 .

[18]  Emmanuel O. Ezugwu,et al.  High speed machining of aero-engine alloys , 2004 .

[19]  J. Bonney,et al.  The Effect of Argon-Enriched Environment in High-Speed Machining of Titanium Alloy , 2005 .

[20]  Z. G. Wang,et al.  A Review on High-Speed Machining of Titanium Alloys ∗ , 2006 .

[21]  A. B. Chattopadhyay,et al.  Growth of tool wear in turning of Ti-6Al-4V alloy under cryogenic cooling , 2007 .

[22]  Yakup Yildiz,et al.  A review of cryogenic cooling in machining processes , 2008 .

[23]  M. I. Ahmed,et al.  Improving tool life using cryogenic cooling , 2008 .

[25]  M. Dargusch,et al.  Machining Ti–6Al–4V alloy with cryogenic compressed air cooling , 2010 .