Recent advances in stability of organic solar cells

ABSTRACT Organic solar cells (OSCs) have achieved rapid development over the last few years, benefitting from the emerging of new non-fullerene acceptors (NFAs). The reported power conversion efficiency (PCE) of OSCs has achieved over 18% up to now, however, the inferior stability issue restricts its commercialization, which stimulates the interest of scientists to explore it in-depth as well. Thus, we discuss the mechanisms of the instability in OSC devices, comprehensively summarize the progress of OSC stability in recent years and propose a series of solutions that improve the stability in this review. Although the highly-stable OSCs with extrapolated lifetime over several decades have been reported, the biggest drawback of them is the insufficient PCE. Thereby, investigating efficient OSCs with high-stability is required. We expect this review can provide some guidelines to address the instability of OSCs for feasible commercialization in the future.

[1]  A. Amassian,et al.  Highly Efficient and Reproducible Nonfullerene Solar Cells from Hydrocarbon Solvents , 2017 .

[2]  A. Urbina,et al.  Wavelength influence on the photodegradation of P3HT:PCBM organic solar cells , 2015 .

[3]  Eric J. Sawyer,et al.  Mechanical degradation and stability of organic solar cells: molecular and microstructural determinants , 2015 .

[4]  X. Hao,et al.  Unraveling the unstable amorphous phase evolution effect on burn-in loss in polymer-fullerene solar cells , 2019, Organic Electronics.

[5]  J. Buriak,et al.  In-Operando Study of the Effects of Solvent Additives on the Stability of Organic Solar Cells Based on PTB7-Th:PC71BM , 2019, ACS Energy Letters.

[6]  R. Dauskardt,et al.  Thermal cycling effect on mechanical integrity of inverted polymer solar cells , 2015 .

[7]  Jin Young Kim,et al.  Thermally Durable Nonfullerene Acceptor with Nonplanar Conjugated Backbone for High‐Performance Organic Solar Cells , 2020, Advanced Energy Materials.

[8]  H. Yao,et al.  Realizing Ultrahigh Mechanical Flexibility and >15% Efficiency of Flexible Organic Solar Cells via a “Welding” Flexible Transparent Electrode , 2020, Advanced materials.

[9]  Fujun Zhang,et al.  Solvent additive-free ternary polymer solar cells with 16.27% efficiency. , 2019, Science bulletin.

[10]  F. Huang,et al.  Polymer Pre‐Aggregation Enables Optimal Morphology and High Performance in All‐Polymer Solar Cells , 2020, Solar RRL.

[11]  J. Chu,et al.  A Universal Method to Enhance Flexibility and Stability of Organic Solar Cells by Constructing Insulating Matrices in Active Layers , 2020, Advanced Functional Materials.

[12]  Wei Chen,et al.  Elevated Stability and Efficiency of Solar Cells via Ordered Alloy Co-Acceptors , 2019, ACS Energy Letters.

[13]  Q. Peng,et al.  Highly efficient halogen-free solvent processed small-molecule organic solar cells enabled by material design and device engineering , 2017 .

[14]  M. Fakis,et al.  Organic solar cells of enhanced efficiency and stability using zinc oxide:zinc tungstate nanocomposite as electron extraction layer , 2019, Organic Electronics.

[15]  Yongfang Li,et al.  Ring-perfluorinated non-volatile additives with a high dielectric constant lead to highly efficient and stable organic solar cells , 2019, Journal of Materials Chemistry C.

[16]  H. Ade,et al.  Rational Strategy to Stabilize an Unstable High‐Efficiency Binary Nonfullerene Organic Solar Cells with a Third Component , 2019, Advanced Energy Materials.

[17]  S. Forrest,et al.  Photodegradation of small-molecule organic photovoltaics , 2014 .

[18]  J. Hummelen,et al.  Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.

[19]  Rawad K. Hallani,et al.  Self-Assembled Monolayer Enables Hole Transport Layer-Free Organic Solar Cells with 18% Efficiency and Improved Operational Stability , 2020 .

[20]  Jianbin Xu,et al.  Degradation mechanism of organic solar cells with aluminum cathode , 2011 .

[21]  David G Lidzey,et al.  Fluorinated solid additives enable high efficiency non-fullerene organic solar cells , 2020, Journal of Materials Chemistry A.

[22]  Chang-Qi Ma,et al.  Roll-to-roll printed stable and thickness-independent ZnO:PEI composite electron transport layer for inverted organic solar cells , 2019, Solar Energy.

[23]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[24]  W. Ma,et al.  Stable large area organic solar cells realized by using random terpolymers donors combined with a ternary blend , 2019, Journal of Materials Chemistry A.

[25]  J. Roncali Single Material Solar Cells: the Next Frontier for Organic Photovoltaics? , 2011 .

[26]  Fujun Zhang,et al.  Versatile ternary organic solar cells: a critical review , 2016 .

[27]  Donal D. C. Bradley,et al.  Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene , 2005 .

[28]  T. Someya,et al.  Highly efficient organic photovoltaics with enhanced stability through the formation of doping-induced stable interfaces , 2020, Proceedings of the National Academy of Sciences.

[29]  Annalisa Bonfiglio,et al.  Influence of thermal ageing on the stability of polymer bulk heterojunction solar cells , 2007 .

[30]  Meng-Huan Jao,et al.  Additives for morphology control in high-efficiency organic solar cells , 2013 .

[31]  M. B. Upama,et al.  Analysis of burn-in photo degradation in low bandgap polymer PTB7 using photothermal deflection spectroscopy , 2016 .

[32]  H. Aziz,et al.  Enhanced photo-stability of inverted organic solar cells via using polyethylenimine in the electron extraction layers , 2019, Organic Electronics.

[33]  A. Facchetti,et al.  Thermal Stabilisation of Polymer–Fullerene Bulk Heterojunction Morphology for Efficient Photovoltaic Solar Cells , 2014, Advanced materials.

[34]  Shaohua Shen,et al.  Hematite heterostructures for photoelectrochemical water splitting: rational materials design and charge carrier dynamics , 2016 .

[35]  Efficient inverted organic solar cells with a thin natural biomaterial l-Arginine as electron transport layer , 2020 .

[36]  T. Moore,et al.  PHOTOINDUCED ELECTRON TRANSFER IN A CAROTENOBUCKMINSTERFULLERENE DYAD , 1995 .

[37]  Oliver Kraft,et al.  Mechanically robust, ITO-free, 4.8% efficient, all-solution processed organic solar cells on flexible PET foil , 2014 .

[38]  F. Huang,et al.  High‐Performance Large‐Area Organic Solar Cells Enabled by Sequential Bilayer Processing via Nonhalogenated Solvents , 2018, Advanced Energy Materials.

[39]  Qiang Wu,et al.  Simultaneous enhanced efficiency and thermal stability in organic solar cells from a polymer acceptor additive , 2020, Nature Communications.

[40]  Hongzheng Chen,et al.  Simple non-fused electron acceptors for efficient and stable organic solar cells , 2019, Nature Communications.

[41]  B. Calder,et al.  Ryder Glacier in northwest Greenland is shielded from warm Atlantic water by a bathymetric sill , 2020, Communications Earth & Environment.

[42]  Vincent M. Le Corre,et al.  Photostability of Fullerene and Non-Fullerene Polymer Solar Cells: The Role of the Acceptor , 2019, ACS applied materials & interfaces.

[43]  M. Kaltenbrunner,et al.  Ultrathin and lightweight organic solar cells with high flexibility , 2012, Nature Communications.

[44]  J. Haigh,et al.  The Effect of Solar UV Irradiance Variations on the Earth's Atmosphere , 2000 .

[45]  Xiao-Fang Jiang,et al.  High-Performance Ternary Organic Solar Cell Enabled by a Thick Active Layer Containing a Liquid Crystalline Small Molecule Donor. , 2017, Journal of the American Chemical Society.

[46]  F. Zhu,et al.  Built‐In Potential and Operational Stability of Nonfullerene Organic Solar Cells , 2020, Energy Technology.

[47]  W. Ma,et al.  Efficient and stable organic solar cells via a sequential process , 2016 .

[48]  G. Seifert,et al.  High Conductivity in Molecularly p‐Doped Diketopyrrolopyrrole‐Based Polymer: The Impact of a High Dopant Strength and Good Structural Order , 2016, Advanced materials.

[49]  Timothy M. Burke,et al.  Reducing burn-in voltage loss in polymer solar cells by increasing the polymer crystallinity , 2014 .

[50]  A. Facchetti,et al.  Naphthalenediimide (NDI) polymers for all-polymer photovoltaics , 2018 .

[51]  Tao Zhang,et al.  Achieving Over 15% Efficiency in Organic Photovoltaic Cells via Copolymer Design , 2019, Advanced materials.

[52]  Hongbin Wu,et al.  n-Type Water/Alcohol-Soluble Naphthalene Diimide-Based Conjugated Polymers for High-Performance Polymer Solar Cells. , 2016, Journal of the American Chemical Society.

[53]  Jegadesan Subbiah,et al.  Flexible ITO‐Free Organic Photovoltaics on Ultra‐Thin Flexible Glass Substrates with High Efficiency and Improved Stability , 2019, Solar RRL.

[54]  M. B. Upama,et al.  Photo-degradation of high efficiency fullerene-free polymer solar cells. , 2017, Nanoscale.

[55]  Richard A. L. Jones,et al.  Physical Mechanisms Responsible for the Water-Induced Degradation of PC61BM P3HT Photovoltaic Thin Films , 2016 .

[56]  I. García,et al.  Water-soluble magnetic glyconanoparticles based on metal-doped ferrites coated with gold: Synthesis and characterization , 2010 .

[57]  Hang Yin,et al.  Enhanced Electron Transport and Heat Transfer Boost Light Stability of Ternary Organic Photovoltaic Cells Incorporating Non‐Fullerene Small Molecule and Polymer Acceptors , 2019, Advanced Electronic Materials.

[58]  Yong Cao,et al.  Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices. , 2009, Accounts of chemical research.

[59]  Martin Helgesen,et al.  Novel acrylic monomers for organic photovoltaics encapsulation , 2020 .

[60]  R. Grisorio,et al.  On the Degradation Process Involving Polyfluorenes and the Factors Governing Their Spectral Stability , 2011 .

[61]  D. Bradley,et al.  Degradation of organic solar cells due to air exposure , 2006 .

[62]  Garry Rumbles,et al.  Photoinduced Degradation of Polymer and Polymer–Fullerene Active Layers: Experiment and Theory , 2010 .

[63]  Changsoon Cho,et al.  Highly Efficient (>10%) Flexible Organic Solar Cells on PEDOT‐Free and ITO‐Free Transparent Electrodes , 2019, Advanced materials.

[64]  H. Ade,et al.  Dual Sensitizer and Processing-Aid Behavior of Donor Enables Efficient Ternary Organic Solar Cells , 2019, Joule.

[65]  Ruixiang Peng,et al.  13.5% flexible organic solar cells achieved by robust composite ITO/PEDOT:PSS electrodes , 2019 .

[66]  Christoph J. Brabec,et al.  Interface materials for organic solar cells , 2010 .

[67]  K. Hou,et al.  Solution-processable ZnO/3-aminopropyltriethoxysilane hybrid cathode interlayer for non-fullerene organic solar cells , 2019 .

[68]  Z. Tang,et al.  Exquisite modulation of ZnO nanoparticle electron transporting layer for high-performance fullerene-free organic solar cell with inverted structure , 2019, Journal of Materials Chemistry A.

[69]  Mikkel Jørgensen,et al.  Failure Modes and Fast Repair Procedures in High Voltage Organic Solar Cell Installations , 2014 .

[70]  Yi Wang,et al.  Facile Synthesis of Peptide Cross-Linked Nanogels for Tumor Metastasis Inhibition , 2018 .

[71]  Zhenhua Chen,et al.  Modulating the molecular packing and distribution enables fullerene-free ternary organic solar cells with high efficiency and long shelf-life , 2019, Journal of Materials Chemistry A.

[72]  He Yan,et al.  A Wide-Bandgap Donor Polymer for Highly Efficient Non-fullerene Organic Solar Cells with a Small Voltage Loss. , 2017, Journal of the American Chemical Society.

[73]  A. Emwas,et al.  17.1% Efficient Single‐Junction Organic Solar Cells Enabled by n‐Type Doping of the Bulk‐Heterojunction , 2020, Advanced science.

[74]  Lei Wang,et al.  pH-neutral PEDOT:PSS as hole injection layer in polymer light emitting diodes , 2011 .

[75]  Feng Liu,et al.  Single-junction polymer solar cells with high efficiency and photovoltage , 2015, Nature Photonics.

[76]  Yanming Sun,et al.  Optimized active layer morphology toward efficient and polymer batch insensitive organic solar cells , 2020, Nature Communications.

[77]  J. Ni,et al.  Methanol solvent treatment: A simple strategy to significantly boost efficiency and stability of air-processed ternary organic solar cells based on PTB7-Th:PCDTBT:PC70BM , 2017 .

[78]  H. Meng,et al.  Boosting Efficiency and Stability of Organic Solar Cells Using Ultralow-Cost BiOCl Nanoplates as a Hole Transporting Layer. , 2019, ACS applied materials & interfaces.

[79]  A. Uddin,et al.  Comparative analysis of burn-in photo-degradation in non-fullerene COi8DFIC acceptor based high-efficiency ternary organic solar cells , 2019, Materials Chemistry Frontiers.

[80]  A. Heeger,et al.  Molecular Doping Enhances Photoconductivity in Polymer Bulk Heterojunction Solar Cells , 2013, Advanced materials.

[81]  Kilwon Cho,et al.  Recent Advances in Morphology Optimization for Organic Photovoltaics , 2018, Advanced materials.

[82]  Yongfang Li,et al.  Passivated Metal Oxide n-Type Contacts for Efficient and Stable Organic Solar Cells , 2020 .

[83]  N. Stingelin,et al.  What is Killing Organic Photovoltaics: Light‐Induced Crosslinking as a General Degradation Pathway of Organic Conjugated Molecules , 2020, Advanced Energy Materials.

[84]  Ling Hong,et al.  Over 14% Efficiency Folding-Flexible ITO-free Organic Solar Cells Enabled by Eco-friendly Acid-Processed Electrodes , 2020, iScience.

[85]  G. Wantz,et al.  Interfacial thermal degradation in inverted organic solar cells , 2015 .

[86]  Ning Li,et al.  Stability of Nonfullerene Organic Solar Cells: from Built‐in Potential and Interfacial Passivation Perspectives , 2019, Advanced Energy Materials.

[87]  Thanh Luan Nguyen,et al.  Single Component Organic Solar Cells Based on Oligothiophene‐Fullerene Conjugate , 2017 .

[88]  Fei Huang,et al.  Optimisation of processing solvent and molecular weight for the production of green-solvent-processed all-polymer solar cells with a power conversion efficiency over 9% , 2017 .

[89]  Yongfang Li,et al.  A universal layer-by-layer solution-processing approach for efficient non-fullerene organic solar cells , 2019, Energy & Environmental Science.

[90]  Xuyu Gao,et al.  Benzodithiophene-modified terpolymer acceptors with reduced molecular planarity and crystallinity: improved performance and stability for all-polymer solar cells , 2019, Journal of Materials Chemistry C.

[91]  1,8-diiodooctane acts as a photo-acid in organic solar cells , 2019, Scientific Reports.

[92]  Jacek Ulanski,et al.  Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core , 2019, Joule.

[93]  Frederik C. Krebs,et al.  Effects of concentrated sunlight on organic photovoltaics , 2010 .

[94]  Jianhui Hou,et al.  Inorganic molecular cluster of facile preparation and neutral pH for efficient hole extraction in organic solar cells. , 2020, ACS applied materials & interfaces.

[95]  Christoph J. Brabec,et al.  A top-down strategy identifying molecular phase stabilizers to overcome microstructure instabilities in organic solar cells , 2019, Energy & Environmental Science.

[96]  H. Yao,et al.  Energy level modulation of ITIC derivatives: Effects on the photodegradation of conventional and inverted organic solar cells , 2019, Organic Electronics.

[97]  Frank W. Fecher,et al.  Water Ingress in Encapsulated Inverted Organic Solar Cells: Correlating Infrared Imaging and Photovoltaic Performance , 2015 .

[98]  C. Deibel,et al.  Oxygen doping of P3HT:PCBM blends: Influence on trap states, charge carrier mobility and solar cell performance , 2010, 1008.4230.

[99]  Agnès Rivaton,et al.  Light-induced degradation of the active layer of polymer-based solar cells , 2010 .

[100]  A. Colsmann,et al.  Thermal Stabilization of the Bulk-Heterojunction Morphology in Polymer:Fullerene Solar Cells Using a Bisazide Cross-Linker , 2018, Solar RRL.

[101]  Non-halogenated additive engineering for morphology optimization in environmental-friendly solvent processed non-fullerene organic solar cells , 2020 .

[102]  Bertrand J. Tremolet de Villers,et al.  Removal of Residual Diiodooctane Improves Photostability of High-Performance Organic Solar Cell Polymers , 2016 .

[103]  Phillip K. Koech,et al.  Synthesis and Application of 1,3,4,5,7,8-Hexafluorotetracyanonaphthoquinodimethane (F6-TNAP): A Conductivity Dopant for Organic Light-Emitting Devices , 2010 .

[104]  Zhenhua Chen,et al.  Delayed Fluorescence Emitter Enables Near 17% Efficiency Ternary Organic Solar Cells with Enhanced Storage Stability and Reduced Recombination Energy Loss , 2020, Advanced Functional Materials.

[105]  H. Yip,et al.  Exploiting Ternary Blends for Improved Photostability in High-Efficiency Organic Solar Cells , 2020 .

[106]  Kwanghee Lee,et al.  Efficient and photostable ternary organic solar cells with a narrow band gap non-fullerene acceptor and fullerene additive , 2020 .

[107]  Amy M. Ballantyne,et al.  Free Energy Control of Charge Photogeneration in Polythiophene/Fullerene Solar Cells: The Influence of Thermal Annealing on P3HT/PCBM Blends , 2008 .

[108]  X. Hao,et al.  Efficient Ternary Organic Solar Cells Enabled by the Integration of Nonfullerene and Fullerene Acceptors with a Broad Composition Tolerance , 2018, Advanced Functional Materials.

[109]  Liming Ding,et al.  Ternary organic solar cells offer 14% power conversion efficiency. , 2017, Science bulletin.

[110]  Xianjie Liu,et al.  Effects of water vapor and oxygen on non-fullerene small molecule acceptors , 2019, Journal of Materials Chemistry C.

[111]  QUAN LIU,et al.  Circumventing UV Light Induced Nanomorphology Disorder to Achieve Long Lifetime PTB7‐Th:PCBM Based Solar Cells , 2017 .

[112]  Miao Xu,et al.  Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure , 2012, Nature Photonics.

[113]  H. Ade,et al.  Asymmetrically noncovalently fused-ring acceptor for high-efficiency organic solar cells with reduced voltage loss and excellent thermal stability , 2020 .

[114]  Qi Chen,et al.  External load-dependent degradation of P3HT:PC61BM solar cells: behavior, mechanism, and method of suppression , 2017 .

[115]  Jikang Liu,et al.  Lithium-Ion-Based Conjugated Polyelectrolyte as an Interface Material for Efficient and Stable Non-Fullerene Organic Solar Cells. , 2019, ChemSusChem.

[116]  Hyun Hwi Lee,et al.  Ternary blend organic solar cells with improved morphological stability , 2019, Journal of Materials Chemistry A.

[117]  J. Sambles,et al.  A Few‐Monolayer Organic Rectifier , 1993 .

[118]  Agnès Rivaton,et al.  The mechanism of photo- and thermooxidation of poly(3-hexylthiophene) (P3HT) reconsidered , 2009 .

[119]  A. Salleo,et al.  The role of the third component in ternary organic solar cells , 2019, Nature Reviews Materials.

[120]  O Ok Park,et al.  Sequential processing: control of nanomorphology in bulk heterojunction solar cells. , 2011, Nano letters.

[121]  Ning Wang,et al.  Enhanced Performance and Stability of Ternary Organic Solar Cells Utilizing Two Similar Structure Blend Fullerene‐Free Molecules as Electron Acceptor , 2019, Advanced Optical Materials.

[122]  Yong Cao,et al.  Interface-enhanced organic solar cells with extrapolated T80 lifetimes of over 20 years. , 2020, Science bulletin.

[123]  Milos Nesladek,et al.  Influence of fullerene photodimerization on the PCBM crystallization in polymer: Fullerene bulk heterojunctions under thermal stress , 2013 .

[124]  S. So,et al.  High‐Performance Ternary Organic Solar Cells with Morphology‐Modulated Hole Transfer and Improved Ultraviolet Photostability , 2020, Solar RRL.

[125]  Zhe Li,et al.  An Efficient, “Burn in” Free Organic Solar Cell Employing a Nonfullerene Electron Acceptor , 2017, Advanced materials.

[126]  A. Jen,et al.  In‐situ Crosslinking and n‐Doping of Semiconducting Polymers and Their Application as Efficient Electron‐Transporting Materials in Inverted Polymer Solar Cells , 2011 .

[127]  K. Ho,et al.  Highly conductive PEDOT:PSS electrode by simple film treatment with methanol for ITO-free polymer solar cells , 2012 .

[128]  F. Brunetti,et al.  Solvent effects on the morphology and stability of PTB7:PCBM based solar cells , 2016 .

[129]  H. Ade,et al.  Revealing the Impact of F4‐TCNQ as Additive on Morphology and Performance of High‐Efficiency Nonfullerene Organic Solar Cells , 2018, Advanced Functional Materials.

[130]  J. Yao,et al.  A nonfullerene acceptor with a 1000 nm absorption edge enables ternary organic solar cells with improved optical and morphological properties and efficiencies over 15% , 2019, Energy & Environmental Science.

[131]  E. Speller,et al.  The significance of fullerene electron acceptors in organic solar cell photo-oxidation , 2017 .

[132]  Yanming Sun,et al.  Non‐Fullerene Organic Solar Cells Based on Benzo[1,2‐b:4,5‐b′]difuran‐Conjugated Polymer with 14% Efficiency , 2019, Advanced Functional Materials.

[133]  Byung-Kwan Yu,et al.  Time‐Dependent Morphology Evolution by Annealing Processes on Polymer:Fullerene Blend Solar Cells , 2009 .

[134]  A. Braun,et al.  Concentrated sunlight for accelerated stability testing of organic photovoltaic materials: towards decoupling light intensity and temperature , 2015 .

[135]  Yanming Sun,et al.  Inverted Polymer Solar Cells Integrated with a Low‐Temperature‐Annealed Sol‐Gel‐Derived ZnO Film as an Electron Transport Layer , 2011, Advanced materials.

[136]  Ning Wang,et al.  Ternary organic solar cells with NC70BA as a third component material exhibit high open-circuit voltage and small energy losses , 2020 .

[137]  S. Forrest,et al.  Intrinsic burn-in efficiency loss of small-molecule organic photovoltaic cells due to exciton-induced trap formation , 2013 .

[138]  Weihua Tang,et al.  Molecular Orientation Unified Nonfullerene Acceptor Enabling 14% Efficiency As‐Cast Organic Solar Cells , 2019, Advanced Functional Materials.

[139]  C. Brabec,et al.  Efficient Polymer Solar Cells Based on Non-fullerene Acceptors with Potential Device Lifetime Approaching 10 Years , 2019, Joule.

[140]  T. Someya,et al.  High Operation Stability of Ultraflexible Organic Solar Cells with Ultraviolet‐Filtering Substrates , 2019, Advanced materials.

[141]  Donggu Lee,et al.  Enhanced Operating Temperature Stability of Organic Solar Cells with Metal Oxide Hole Extraction Layer , 2020, Polymers.

[142]  H. Hoppe,et al.  Luminescence imaging of polymer solar cells: Visualization of progressing degradation , 2011 .

[143]  C. Brabec,et al.  Thermal-Driven Phase Separation of Double-Cable Polymers Enables Efficient Single-Component Organic Solar Cells , 2019, Joule.

[144]  Yao Wang,et al.  Hybrid ZnO Electron Transport Layer by Down Conversion Complexes for Dual Improvements of Photovoltaic and Stable Performances in Polymer Solar Cells , 2020, Nanomaterials.

[145]  Ruixiang Peng,et al.  16.67% Rigid and 14.06% Flexible Organic Solar Cells Enabled by Ternary Heterojunction Strategy , 2019, Advanced materials.

[146]  M. Matheron,et al.  Encapsulation Effect on Performance and Stability of Organic Solar Cells , 2020, Advanced Materials Interfaces.

[147]  C. Brabec,et al.  Evidencing Excellent Thermal‐ and Photostability for Single‐Component Organic Solar Cells with Inherently Built‐In Microstructure , 2019, Advanced Energy Materials.

[148]  M. Matheron,et al.  Mechanical Reliability of Flexible Encapsulated Organic Solar Cells: Characterization and Improvement. , 2018, ACS applied materials & interfaces.

[149]  Agnès Rivaton,et al.  Further insights into the photodegradation of poly(3-hexylthiophene) by means of X-ray photoelectron spectroscopy , 2010 .

[150]  Ashraf Uddin,et al.  Encapsulation of Organic and Perovskite Solar Cells: A Review , 2019, Coatings.

[151]  Yong Cao,et al.  Organic and solution-processed tandem solar cells with 17.3% efficiency , 2018, Science.

[152]  Weihua Tang,et al.  Nonacyclic carbazole-based non-fullerene acceptors enable over 12% efficiency with enhanced stability for organic solar cells , 2019, Journal of Materials Chemistry A.

[153]  E. Katz,et al.  Design of novel thiazolothiazole-containing conjugated polymers for organic solar cells and modules , 2020 .

[154]  Kristian O. Sylvester-Hvid,et al.  Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy , 2007 .

[155]  T. Aernouts,et al.  Thermally Induced Fullerene Domain Coarsening Process in Organic Solar Cells , 2019, IEEE Transactions on Electron Devices.

[156]  R. Dauskardt,et al.  Molecular-Scale Understanding of Cohesion and Fracture in P3HT:Fullerene Blends. , 2015, ACS applied materials & interfaces.

[157]  Jow-Tsong Shy,et al.  Dynamics and reversibility of oxygen doping and de-doping for conjugated polymer , 2008 .

[158]  Yang Yang,et al.  Polymer solar cells with enhanced open-circuit voltage and efficiency , 2009 .

[159]  Yongsheng Chen,et al.  Efficient and thermally stable organic solar cells based on small molecule donor and polymer acceptor , 2019, Nature Communications.

[160]  Yang Yang,et al.  Rational Tuning of Molecular Interaction and Energy Level Alignment Enables High‐Performance Organic Photovoltaics , 2019, Advanced materials.

[161]  S. M. Abdullah,et al.  An insight into the air stability of the benchmark polymer:fullerene photovoltaic films and devices: A comparative study , 2020 .

[162]  Zhenan Bao,et al.  Effects of Thermal Annealing Upon the Morphology of Polymer–Fullerene Blends , 2010 .

[163]  Jie Zhu,et al.  Design and application of volatilizable solid additives in non-fullerene organic solar cells , 2018, Nature Communications.

[164]  Stephen R. Forrest,et al.  Intrinsically stable organic solar cells under high-intensity illumination , 2019, Nature.

[165]  W. Wang,et al.  A new small molecule donor for efficient and stable all small molecule organic solar cells , 2019, Organic Electronics.

[166]  Jenny Nelson,et al.  Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends. , 2008, Nature materials.

[167]  E. Nakamura,et al.  Deterioration of bulk heterojunction organic photovoltaic devices by a minute amount of oxidized fullerene. , 2012, Chemical communications.

[168]  D. Bradley,et al.  Nano-crater morphology in hybrid electron-collecting buffer layers for high efficiency polymer:nonfullerene solar cells with enhanced stability. , 2019, Nanoscale horizons.

[169]  C. Brabec,et al.  Ternary All-Polymer Solar Cells With 8.5% Power Conversion Efficiency and Excellent Thermal Stability , 2020, Frontiers in Chemistry.

[170]  Agnès Rivaton,et al.  Photo- and thermo-oxidation of poly(p-phenylene-vinylene) and phenylene-vinylene oligomer , 2011 .

[171]  S. Beaupré,et al.  Fused Benzothiadiazole: A Building Block for n‐Type Organic Acceptor to Achieve High‐Performance Organic Solar Cells , 2019, Advanced materials.

[172]  Weiwei Li,et al.  Miscibility-Controlled Phase Separation in Double-Cable Conjugated Polymers for Single-Component Organic Solar Cells with Efficiencies over 8. , 2020, Angewandte Chemie.

[173]  Xiaoniu Yang,et al.  Enhancing thermal stability of nonfullerene organic solar cells via fluoro-side-chain engineering , 2019, Journal of Materials Chemistry C.

[174]  C. Brabec,et al.  Unraveling the Microstructure‐Related Device Stability for Polymer Solar Cells Based on Nonfullerene Small‐Molecular Acceptors , 2020, Advanced materials.

[175]  Yongbo Yuan,et al.  Blade-coated efficient and stable large-area organic solar cells with optimized additive , 2020 .

[176]  Jun Liu,et al.  Organic solar cells based on small molecule donors and polymer acceptors operating at 150 °C , 2020 .

[177]  L. Tao,et al.  Turning waste into wealth , 2021, Joule.

[178]  A. Uddin,et al.  Progress in Stability of Organic Solar Cells , 2020, Advanced science.

[179]  T. Someya,et al.  Efficient and Mechanically Robust Ultraflexible Organic Solar Cells Based on Mixed Acceptors , 2020 .

[180]  H. Bender,et al.  Root-cause failure analysis of photocurrent loss in polythiophene:fullerene-based inverted solar cells. , 2015, ACS applied materials & interfaces.

[181]  S. M. Abdullah,et al.  UV- ozone treated graphene oxide/ PEDOT:PSS bilayer as a novel hole transport layer in highly efficient and stable organic solar cells , 2019, Organic Electronics.

[182]  Jisoo Park,et al.  Enhanced gas barrier property of stacking-controlled reduced graphene oxide films for encapsulation of polymer solar cells , 2019, Carbon.

[183]  Shangfeng Yang,et al.  18% Efficiency organic solar cells. , 2020, Science bulletin.

[184]  Alex K.-Y. Jen,et al.  Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells , 2012 .

[185]  Sungmin Park,et al.  High-Performance and Stable Nonfullerene Acceptor-Based Organic Solar Cells for Indoor to Outdoor Light , 2020, ACS Energy Letters.

[186]  H. Ade,et al.  Highly Efficient, Stable, and Ductile Ternary Nonfullerene Organic Solar Cells from a Two‐Donor Polymer Blend , 2019, Advanced materials.

[187]  Y. Zou,et al.  High-Performance Ternary Organic Solar Cells with Controllable Morphology via Sequential Layer-by-Layer Deposition. , 2020, ACS applied materials & interfaces.

[188]  Joshua H. Carpenter,et al.  Delineation of Thermodynamic and Kinetic Factors that Control Stability in Non-fullerene Organic Solar Cells , 2019, Joule.

[189]  Yong Cao,et al.  High-efficiency organic solar cells with low non-radiative recombination loss and low energetic disorder , 2020, Nature Photonics.

[190]  R. Friend,et al.  Organic solar cells based on non-fullerene acceptors. , 2018, Nature materials.

[191]  F. Krebs,et al.  Degradation of semiconducting polymers by concentrated sunlight , 2011 .

[192]  Christoph J. Brabec,et al.  Abnormal strong burn-in degradation of highly efficient polymer solar cells caused by spinodal donor-acceptor demixing , 2017, Nature Communications.

[193]  S. Beaupré,et al.  Impact of UV‐Visible Light on the Morphological and Photochemical Behavior of a Low‐Bandgap Poly(2,7‐Carbazole) Derivative for Use in High‐Performance Solar Cells , 2013 .

[194]  H. Ade,et al.  Black phosphorus nanoflakes as morphology modifier for efficient fullerene-free organic solar cells with high fill-factor and better morphological stability , 2019, Nano Research.

[195]  G. Portale,et al.  Improved photostability in ternary blend organic solar cells: the role of [70]PCBM , 2019, Journal of Materials Chemistry C.

[196]  Suren A. Gevorgyan,et al.  Degradation patterns in water and oxygen of an inverted polymer solar cell. , 2010, Journal of the American Chemical Society.

[197]  Nitin Saxena,et al.  Tailoring Morphology Compatibility and Device Stability by Adding PBDTTPD-COOH as Third Component to Fullerene-Based Polymer Solar Cells , 2020 .

[198]  S. Eisebitt,et al.  Localized Charge Transfer in a Molecularly Doped Conducting Polymer , 2007 .

[199]  A. Donald,et al.  Grain size dependence of degradation of aluminium/calcium cathodes in organic solar cells following exposure to humid air , 2015 .

[200]  Jean M. J. Fréchet,et al.  Improving the long-term stability of PBDTTPD polymer solar cells through material purification aimed at removing organic impurities , 2013 .

[201]  C. Brabec,et al.  Thin Film Encapsulation of Organic Solar Cells by Direct Deposition of Polysilazanes from Solution , 2019, Advanced Energy Materials.

[202]  C. Brabec,et al.  An Operando Study on the Photostability of Nonfullerene Organic Solar Cells , 2019, Solar RRL.

[203]  P. Prasad,et al.  Synthesis and properties of substituted (p-aminostyryl)-1-(3-sulfooxypropyl)pyridinium inner salts as a new class of two-photon pumped lasing dyes , 2003 .

[204]  Tao Yang,et al.  A compatible polymer acceptor enables efficient and stable organic solar cells as a solid additive , 2020 .

[205]  Bryon W. Larson,et al.  Simultaneously Improved Efficiency and Stability in All-Polymer Solar Cells by a P–i–N Architecture , 2019, ACS Energy Letters.

[206]  Christopher C. S. Chan,et al.  Delocalization of exciton and electron wavefunction in non-fullerene acceptor molecules enables efficient organic solar cells , 2020, Nature Communications.

[207]  M. McGehee,et al.  Minimal Long-Term Intrinsic Degradation Observed in a Polymer Solar Cell Illuminated in an Oxygen-Free Environment , 2015 .

[208]  W. Wang,et al.  An Oligothiophene–Fullerene Molecule with a Balanced Donor–Acceptor Backbone for High‐Performance Single‐Component Organic Solar Cells , 2019, Angewandte Chemie.

[209]  Wei Li,et al.  Synergetic Transparent Electrode Architecture for Efficient Non-Fullerene Flexible Organic Solar Cells with >12% Efficiency. , 2019, ACS Nano.

[210]  Youqi Zhu,et al.  Highly Efficient and Operational Stability Polymer Solar Cells Employing Nonhalogenated Solvents and Additives. , 2018, ACS applied materials & interfaces.

[211]  C. Brabec,et al.  Morphological and electrical control of fullerene dimerization determines organic photovoltaic stability , 2016 .

[212]  Shangfeng Yang,et al.  Passivating Surface Defects of n‐SnO2 Electron Transporting Layer by InP/ZnS Quantum Dots: Toward Efficient and Stable Organic Solar Cells , 2020, Advanced Electronic Materials.

[213]  A. Salleo,et al.  The Mechanism of Burn‐in Loss in a High Efficiency Polymer Solar Cell , 2012, Advanced materials.

[214]  Eszter Voroshazi,et al.  Decohesion Kinetics of PEDOT:PSS Conducting Polymer Films , 2014 .

[215]  Hang Yin,et al.  Highly-Crystalline Near-Infrared Acceptor Enabling Simultaneous Efficiency and Photostability Boosting in High-Performance Ternary Organic Solar Cells. , 2019, ACS applied materials & interfaces.

[216]  Yana Vaynzof,et al.  Oxygen-Induced Doping as a Degradation Mechanism in Highly Efficient Organic Solar Cells , 2019, ACS Applied Energy Materials.

[217]  W. Ma,et al.  Sequential Blade‐Coated Acceptor and Donor Enables Simultaneous Enhancement of Efficiency, Stability, and Mechanical Properties for Organic Solar Cells , 2020, Advanced Energy Materials.

[218]  G. Hadziioannou,et al.  Synthesis of a C60-oligophenylenevinylene hybrid and its incorporation in a photovoltaic device , 1999 .

[219]  Hyesung Park,et al.  Solution‐Processed Molybdenum Oxide with Hydroxyl Radical‐Induced Oxygen Vacancy as an Efficient and Stable Interfacial Layer for Organic Solar Cells , 2020 .

[220]  Daoben Zhu,et al.  An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells , 2015, Advanced materials.

[221]  F. Liu,et al.  A generic green solvent concept boosting the power conversion efficiency of all-polymer solar cells to 11% , 2019, Energy & Environmental Science.

[222]  C. Brabec,et al.  Revealing Hidden UV Instabilities in Organic Solar Cells by Correlating Device and Material Stability , 2019, Advanced Energy Materials.

[223]  Alexander Colsmann,et al.  Highly efficient polymer solar cells cast from non-halogenated xylene/anisaldehyde solution , 2015 .

[224]  Rui Wang,et al.  Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics , 2019, Nature Communications.

[225]  J. Kong,et al.  A relatively wide-bandgap and air-stable donor polymer for fabrication of efficient semitransparent and tandem organic photovoltaics , 2019, Proceedings of the National Academy of Sciences.

[226]  Christoph J. Brabec,et al.  Organic Ternary Solar Cells: A Review , 2013, Advanced materials.

[227]  R. Bachelot,et al.  Ultraviolet‐Durable Flexible Nonfullerene Organic Solar Cells Realized by a Hybrid Nanostructured Transparent Electrode , 2020, Solar RRL.

[228]  L. Schmidt‐Mende,et al.  Lithium Doping of ZnO for High Efficiency and Stability Fullerene and Non-fullerene Organic Solar Cells , 2019, ACS Applied Energy Materials.

[229]  H. Ade,et al.  Quenching to the Percolation Threshold in Organic Solar Cells , 2019, Joule.

[230]  Cheng Gu,et al.  Insight into the Efficiency and Stability of All-Polymer Solar Cells Based on Two 2D-Conjugated Polymer Donors: Achieving High Fill Factor of 78. , 2019, ACS applied materials & interfaces.

[231]  Hui Lin,et al.  An universal morphology regulator for efficient and stable nonfullerene organic solar cells by π–π interaction , 2020 .

[232]  S. Yin,et al.  Solution processed CuSCN/perylene hole extraction layer for highly efficient and stable organic solar cells , 2020 .

[233]  G. Andersson,et al.  Role of humidity on indium and tin migration in organic photovoltaic devices. , 2011, Physical chemistry chemical physics : PCCP.

[234]  S. Biswas,et al.  Utilization of poly (4-styrenesulfonic acid) doped polyaniline as a hole transport layer of organic solar cell for indoor applications , 2020 .

[235]  Ming-Chung Chen,et al.  Marked improvement in the stability of small molecule organic photovoltaics by interfacial modification using self-assembled monolayers to prevent indium diffusion into the active layer , 2013 .

[236]  Yanming Sun,et al.  A General Approach for Lab‐to‐Manufacturing Translation on Flexible Organic Solar Cells , 2019, Advanced materials.

[237]  Sungho Nam,et al.  Inverted polymer fullerene solar cells exceeding 10% efficiency with poly(2-ethyl-2-oxazoline) nanodots on electron-collecting buffer layers , 2015, Nature Communications.

[238]  B. Cao,et al.  In Operando GISAXS and GIWAXS Stability Study of Organic Solar Cells Based on PffBT4T‐2OD:PC71BM with and without Solvent Additive , 2020, Advanced science.

[239]  G. Wang,et al.  All-Polymer Solar Cells: Recent Progress, Challenges, and Prospects. , 2019, Angewandte Chemie.

[240]  Jiajie Liang,et al.  Highly Conducting MXene-Silver Nanowire Transparent Electrodes for Flexible Organic Solar Cells. , 2019, ACS applied materials & interfaces.

[241]  S. Ameen,et al.  New energetic indandione based planar donor for stable and efficient organic solar cells , 2020 .

[242]  P. Topham,et al.  Unravelling the Photodegradation Mechanisms of a Low Bandgap Polymer by Combining Experimental and Modeling Approaches , 2015 .

[243]  J. Gražulevičius,et al.  Biomimetic approach to inhibition of photooxidation in organic solar cells using beta-carotene as an additive. , 2019, ACS applied materials & interfaces.

[244]  Junbiao Peng,et al.  Improving the stability of bulk heterojunction solar cells by incorporating pH-neutral PEDOT:PSS as the hole transport layer. , 2014, ACS applied materials & interfaces.

[245]  R. Dauskardt,et al.  Improved mechanical adhesion and electronic stability of organic solar cells with thermal ageing: the role of diffusion at the hole extraction interface , 2017 .

[246]  Suren A. Gevorgyan,et al.  Stability of Polymer Solar Cells , 2012, Advanced materials.

[247]  Hui Lin,et al.  Hydrogen Bond Induced Green Solvent Processed High Performance Ternary Organic Solar Cells with Good Tolerance on Film Thickness and Blend Ratios , 2019, Advanced Functional Materials.

[248]  Luping Yu,et al.  Effects of additives on the morphology of solution phase aggregates formed by active layer components of high-efficiency organic solar cells. , 2011, Journal of the American Chemical Society.