Development of a Multichannel Membrane Reactor with a Solid Oxide Cell Design

In this study, we aim to adapt a solid oxide cell (SOC) to a membrane reactor for general chemical reactions to leverage the readily available multichannel design of the SOC. As a proof-of-concept, the developed reactor is tested for syngas production by the partial oxidation of methane using oxygen ion transport membranes (ITMs) to achieve oxygen separation and permeation. A La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) membrane and Ni/MgAl2O4 catalyst are used for oxygen permeation and the partial oxidation of methane, respectively. ANSYS Fluent is used to assess the reactor performance with the help of computational fluid dynamics (CFD) simulations. The membrane permeation process is chemical kinetics achieved by user-defined functions (UDFs). The simulation results show that the oxygen permeation rate depends on the temperature, air, and fuel flow rates, as well as the occurrence of reactions, which is consistent with the results reported in the literature. During isothermal operation, the product composition and the species distribution in the reactor change with the methane flow rate. When the molar ratio of fed methane to permeated oxygen is 2.0, the methane conversion and CO selectivity reach a high level, namely 95.8% and 97.2%, respectively, which agrees well with the experimental data reported in the literature. Compared to the isothermal operation, the methane conversion of the adiabatic operation is close to 100%. Still, the CO selectivity only reaches 61.6% due to the hot spot formation of 1491 K in the reactor. To reduce the temperature rise in the adiabatic operation, reducing the methane flow rate is an approach, but the price is that the productivity of syngas is sacrificed as well. In conclusion, the adaption of the SOC to a membrane reactor is achieved, and other reaction applications can be explored in the same way.

[1]  Sun-Ju Song,et al.  A chemically and mechanically stable dual-phase membrane with high oxygen permeation flux , 2020 .

[2]  A. Osman Catalytic Hydrogen Production from Methane Partial Oxidation: Mechanism and Kinetic Study , 2020, Chemical Engineering & Technology.

[3]  S. Kawi,et al.  High oxygen permeable and CO2-tolerant SrCoxFe0.9-xNb0.1O3-δ (x = 0.1–0.8) perovskite membranes: Behavior and mechanism , 2018, Separation and Purification Technology.

[4]  O. Guillon,et al.  Ion-Conducting Ceramic Membrane Reactors for High-Temperature Applications , 2017 .

[5]  M. Pan,et al.  Reaction characteristics of methanol steam reforming inside mesh microchannel reactor , 2016 .

[6]  W. Ding,et al.  Oxygen permeability and CO2-tolerance of Ce0.9Gd0.1O2−δ – SrCo0.8Fe0.1Nb0.1O3−δ dual-phase membrane , 2015 .

[7]  John R. Grace,et al.  Hydrogen production in Multi-Channel Membrane Reactor via Steam Methane Reforming and Methane Catalytic Combustion , 2015 .

[8]  S. Baek,et al.  A numerical study of the effectiveness factors of nickel catalyst pellets used in steam methane reforming for residential fuel cell applications , 2014 .

[9]  Robert J. Kee,et al.  Methane steam reforming in a novel ceramic microchannel reactor , 2013 .

[10]  M. Nemitallah,et al.  Modeling of oxygen permeation through a LSCF ion transport membrane , 2013 .

[11]  Ahmed F. Ghoniem,et al.  Numerical simulation of ion transport membrane reactors: Oxygen permeation and transport and fuel conversion , 2012 .

[12]  Alexander Mitsos,et al.  Ion transport membrane reactors for oxy-combustion – Part I: intermediate-fidelity modeling , 2011 .

[13]  Andreas Seidel-Morgenstern,et al.  Membrane reactors : distributing reactants to improve selectivity and yield , 2010 .

[14]  J. Caro,et al.  Performance of a ceramic membrane reactor with high oxygen flux Ta-containing perovskite for the partial oxidation of methane to syngas , 2010 .

[15]  Chusheng Chen,et al.  CO2-tolerant oxygen separation membranes targeting CO2 capture application , 2009 .

[16]  X. Tan,et al.  Enhancement of oxygen permeation through La0.6Sr0.4Co0.2Fe0.8O3−δ hollow fibre membranes by surface modifications , 2008 .

[17]  Zongping Shao,et al.  Significant effects of sintering temperature on the performance of La0.6Sr0.4Co0.2Fe0.8O3- δ oxygen selective membranes , 2007 .

[18]  X. Tan,et al.  Oxygen production using dense ceramic hollow fiber membrane modules with different operating modes , 2007 .

[19]  Truls Norby,et al.  On the Steady-State Oxygen Permeation Through La2NiO4 + δ Membranes , 2006 .

[20]  Malcolm L. H. Green,et al.  Brief Overview of the Partial Oxidation of Methane to Synthesis Gas , 2003 .

[21]  J. C. Schouten,et al.  Design of adiabatic fixed-bed reactors for the partial oxidation of methane to synthesis gas. Application to production of methanol and hydrogen-for-fuel-cells , 2001 .

[22]  E. Ruckenstein,et al.  Conversions of Methane to Synthesis Gas over Co/γ-Al2O3 by CO2 and/or O2 , 2001 .

[23]  E. Ruckenstein,et al.  Partial Oxidation of Methane to Synthesis Gas over Alkaline Earth Metal Oxide Supported Cobalt Catalysts , 2001 .

[24]  Wanqin Jin,et al.  Experimental and simulation study on a catalyst packed tubular dense membrane reactor for partial oxidation of methane to syngas , 2000 .

[25]  W. Chu,et al.  Sustainable Ni catalyst for partial oxidation of CH4 to syngas at high temperature , 2000 .

[26]  William J. Thomson,et al.  Oxygen permeation rates through ion-conducting perovskite membranes , 1999 .

[27]  E. Ruckenstein,et al.  Methane partial oxidation over NiO/MgO solid solution catalysts , 1999 .

[28]  Heinz Heinemann,et al.  Partial oxidation of methane to syngas over Co/MgO catalysts. Is it low temperature? , 1993 .

[29]  J. Lunsford,et al.  Partial oxidation of methane to carbon monoxide and hydrogen over a Ni/Al2O3 catalyst , 1991 .

[30]  G. Froment,et al.  Methane steam reforming, methanation and water‐gas shift: I. Intrinsic kinetics , 1989 .

[31]  David L. Trimm,et al.  The combustion of methane on platinum—alumina fibre catalysts—I: Kinetics and mechanism , 1980 .

[32]  M. Prettre,et al.  The catalytic oxidation of methane to carbon monoxide and hydrogen , 1946 .

[33]  H. Liander The utilisation of natural gases for the ammonia process , 1929 .