Influence of cutting tool and conditions on machinability aspects of polyphthalamide (PPA) matrix composite materials with 30 % glass fiber reinforced

[1]  J. Babu,et al.  Experimental Studies on Effect of Process Parameters on Delamination in Drilling GFRP Composites Using Taguchi Method , 2014 .

[2]  T. V. Rajamurugan,et al.  Analysis of delamination in drilling glass fiber reinforced polyester composites , 2013 .

[3]  W. Van Paepegem,et al.  Induced drilling strains in glass fibre reinforced epoxy composites , 2013 .

[4]  J. Galy,et al.  Molecular modelling of polyphthalamides thermal properties: Comparison between modelling and experimental results , 2012 .

[5]  K. Palanikumar,et al.  Analysis on Drilling of Glass Fiber–Reinforced Polymer (GFRP) Composites Using Grey Relational Analysis , 2012 .

[6]  Ekkard Brinksmeier,et al.  Surface integrity in material removal processes: Recent advances , 2011 .

[7]  E. Kilickap,et al.  Optimization of cutting parameters on delamination based on Taguchi method during drilling of GFRP composite , 2010, Expert Syst. Appl..

[8]  J. Paulo Davim,et al.  Machinability study on precision turning of PA66 polyamide with and without glass fiber reinforcing , 2009 .

[9]  J. Paulo Davim,et al.  Effects of high speed in the drilling of glass fibre reinforced plastic: Evaluation of the delamination factor , 2008 .

[10]  J. Paulo Davim,et al.  Prediction and Minimization of Delamination in Drilling of Medium-Density Fiberboard (MDF) Using Response Surface Methodology and Taguchi Design , 2008 .

[11]  J. Paulo Davim,et al.  Taguchi multiple-performance characteristics optimization in drilling of medium density fibreboard (MDF) to minimize delamination using utility concept , 2008 .

[12]  J. Paulo Davim,et al.  Statistical study of surface roughness in turning of peek composites , 2008 .

[13]  K. Palanikumar,et al.  Modeling and analysis for surface roughness in machining glass fibre reinforced plastics using response surface methodology , 2007 .

[14]  K. Palanikumar,et al.  Assessment of factors influencing surface roughness on the machining of glass fiber-reinforced polymer composites , 2006 .

[15]  J. Paulo Davim,et al.  Optimisation of surface roughness on turning fibre-reinforced plastics (FRPs) with diamond cutting tools , 2005 .

[16]  J. Paulo Davim,et al.  Drilling fiber reinforced plastics (FRPs) manufactured by hand lay-up: influence of matrix (Viapal VUP 9731 and ATLAC 382-05) , 2004 .

[17]  J. Paulo Davim,et al.  Machinability study on composite (polyetheretherketone reinforced with 30% glass fibre–PEEK GF 30) using polycrystalline diamond (PCD) and cemented carbide (K20) tools , 2004 .

[18]  I. El-Sonbaty,et al.  Factors affecting the machinability of GFR/epoxy composites , 2004 .

[19]  J. Paulo Davim,et al.  Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up , 2004 .

[20]  Hong Hocheng,et al.  Comprehensive analysis of delamination in drilling of composite materials with various drill bits , 2003 .

[21]  S. K. Malhotra,et al.  Studies on drilling of glass/epoxy laminates using coated high-speed steel drills , 2002 .

[22]  Toshiki Hirogaki,et al.  Investigation on cutting mechanism in small diameter drilling for GFRP (thrust force and surface roughness at drilled hole wall) , 1997 .

[23]  Shih-Chieh Lin,et al.  Drilling carbon fiber-reinforced composite material at high speed , 1996 .

[24]  H. Hocheng,et al.  MACHINABILITY OF SOME FIBER-REINFORCED THERMOSET AND THERMOPLASTICS IN DRILLING , 1993 .

[25]  Ekkard Brinksmeier,et al.  Prediction of Tool Fracture in Drilling , 1990 .