Fundamental study of the removal mechanisms of nano-sized particles using brush scrubber cleaning

To ensure high device yields, wafer surface contamination and defects must be monitored and controlled during the entire process of semiconductor manufacturing. Particle surface concentrations on the wafers, mostly related to chemical mechanical polishing (CMP) processes, must be kept at the lowest possible levels. Brush scrubber cleaning has the potential to achieve this goal. However, the particle removal mechanisms are still under discussion especially the removal of nano-sized particles. This paper investigates the interactions between the particle, the brush and the wafer surface and explores the potential and limitations of the brush scrubbing technique. Furthermore the effect of the various brush/wafer parameters on the particle removal efficiency (PRE) is studied. From a mechanistic viewpoint it is shown that brush scrubbing acts in a mixed lubrication regime. From an extensive analysis of the relevant forces and moments it can be concluded that in the hydrodynamic lubrication regime, particles ar...

[1]  S. Timoshenko,et al.  THEORY OF PLATES AND SHELLS , 1959 .

[2]  M. E. O'Neill,et al.  A Slow motion of viscous liquid caused by a slowly moving solid sphere , 1964 .

[3]  J. Happel,et al.  Low Reynolds number hydrodynamics , 1965 .

[4]  M. E. O'Neill,et al.  A sphere in contact with a plane wall in a slow linear shear flow , 1968 .

[5]  J. A. Wylie,et al.  Tribology: a system approach to the science and technology of friction, lubrication and wear: H. Czicos, published by Elsevier Scientific Publishing Company, Amsterdam, 1978: 400 pages; price $49.50 (Dfl 119.0) , 1979 .

[6]  Sheldon Weinbaum,et al.  A strong interaction theory for the creeping motion of a sphere between plane parallel boundaries. Part 2. Parallel motion , 1980, Journal of Fluid Mechanics.

[7]  Martin A. Hubbe,et al.  Theory of detachment of colloidal particles from flat surfaces exposed to flow , 1984 .

[8]  M. B. Ranade,et al.  Adhesion and Removal of Fine Particles on Surfaces , 1987 .

[9]  Hwa-Chi Wang.  Theoretical comparison on mechanisms to overcome particle surface adhesion , 1989 .

[10]  Hwa-Chi Wang,et al.  Effects of Inceptive motion on particle detachment from surfaces , 1990 .

[11]  P. Ganatos,et al.  The motion of a rigid body in viscous fluid bounded by a plane wall , 1989, Journal of Fluid Mechanics.

[12]  Ronald J. Gutmann,et al.  Chemical Mechanical Planarization of Microelectronic Materials , 1997 .

[13]  G. Burdick,et al.  Assessment of post-CMP cleaning mechanisms using statistically-designed experiments , 1998 .

[14]  Goodarz Ahmadi,et al.  Particle Adhesion and Removal in Chemical Mechanical Polishing and Post‐CMP Cleaning , 1999 .

[15]  Stefan De Gendt,et al.  The IMEC Clean: implementation in advanced CMOS manufacturing , 2000 .

[16]  Stephen P. Beaudoin,et al.  Describing Hydrodynamic Particle Removal from Surfaces Using the Particle Reynolds Number , 2001 .

[17]  Hong Lin,et al.  Particle adhesion and removal mechanisms in post-CMP cleaning processes , 2002, ASMC 2002.

[18]  A. Philipossian,et al.  Tribological Characterization of Post-CMP Brush Scrubbbing , 2003 .

[19]  R. Vos,et al.  Influence of Frequency on the Removal Efficiency of Nano-Particles in a Megasonic Spray Cleaning Tool , 2003 .

[20]  Marc Heyns,et al.  Relation between Particle Density and Haze on a Wafer: a New Approach to Measuring Nano-Sized Particles , 2003 .

[21]  Stephen P. Beaudoin,et al.  A Theoretical Evaluation of Hydrodynamic and Brush Contact Effects on Particle Removal during Brush Scrubbing , 2003 .

[22]  M. Heyns,et al.  Influence of Hardware and Chemistry on the Removal of Nano-Particles in a Megasonic Cleaning Tank , 2003 .

[23]  G. Burdick,et al.  A Theoretical Analysis of Brush Scrubbing Following Chemical Mechanical Polishing , 2003 .

[24]  A. Philipossian,et al.  Tribological Attributes of Post-CMP Brush Scrubbing , 2004 .

[25]  J. Fransaer,et al.  Particle adhesion and removal mechanisms during brush scrubber cleaning in post-CMP processes , 2004 .

[26]  A. Philipossian,et al.  Effect of Mechanical Properties of PVA Brush Rollers on Frictional Forces during Post-CMP Scrubbing , 2004 .