A high-performance multi-beam microaccelerometer for vibration monitoring in intelligent manufacturing equipment

[1]  L.M. Roylance,et al.  A batch-fabricated silicon accelerometer , 1979, IEEE Transactions on Electron Devices.

[2]  P. D. McFadden,et al.  Vibration monitoring of rolling element bearings by the high-frequency resonance technique — a review , 1984 .

[3]  S. Smith,et al.  Current Trends in High-Speed Machining , 1997 .

[4]  Farrokh Ayazi,et al.  Micromachined inertial sensors , 1998, Proc. IEEE.

[5]  Homer Rahnejat,et al.  Bearing induced vibration in precision high speed routing spindles , 2000 .

[6]  Chris K. Mechefske,et al.  Machine Condition Monitoring Based on Transient Vibration Signal Analysis , 2000 .

[7]  Yuelin Wang,et al.  A silicon micromachined shock accelerometer with twin-mass-plate structure , 2003 .

[8]  Yuelin Wang,et al.  A high-performance micromachined piezoresistive accelerometer with axially stressed tiny beams , 2005 .

[9]  Chun-Jen Chen,et al.  The development of a high-speed spindle measurement system using a laser diode and a quadrants sensor , 2005 .

[10]  Fernando S. Schlindwein,et al.  Comparison of integrated micro-electrical-mechanical system and piezoelectric accelerometers for machine condition monitoring , 2006 .

[11]  S. Das,et al.  CMOS compatible bulk micromachined silicon piezoresistive accelerometer with low off-axis sensitivity , 2006, Microelectron. J..

[12]  Lufeng Che,et al.  A silicon micromachined high-shock accelerometer with a bonded hinge structure , 2007 .

[13]  Andrew Starr,et al.  Suitability of MEMS Accelerometers for Condition Monitoring: An experimental study , 2008, Sensors.

[14]  Zheyao Wang,et al.  A Front-Side Released Single Crystalline Silicon Piezoresistive Microcantilever Sensor , 2009 .

[15]  Thor Bakke,et al.  Design, process and characterisation of a high-performance vibration sensor for wireless condition monitoring , 2009 .

[16]  Soumen Das,et al.  Performance enhancement of a silicon MEMS piezoresistive single axis accelerometer with electroplated gold on a proof mass , 2009 .

[17]  S. K. Lahiri,et al.  Cross-axis sensitivity reduction of a silicon MEMS piezoresistive accelerometer , 2009 .

[18]  Max A. González-Palacios,et al.  Performance optimization and mechanical modeling of uniaxial piezoresistive microaccelerometers , 2009 .

[19]  Jiachou Wang,et al.  A High-Performance Dual-Cantilever High-Shock Accelerometer Single-Sided Micromachined in (111) Silicon Wafers , 2010, Journal of Microelectromechanical Systems.

[20]  Shao Wang,et al.  A miniature in-plane piezoresistive MEMS accelerometer for detection of slider off-track motion in hard disk drives , 2010 .

[21]  Deqing Mei,et al.  Piezoresistive Slot-Cantilever Type Accelerometer Inspired from Spider's Slit Sensilla , 2011 .

[22]  Qinglong Zheng,et al.  Micromachined Piezoresistive Accelerometers Based on an Asymmetrically Gapped Cantilever , 2011, Journal of Microelectromechanical Systems.

[23]  Mohd Haris M. Khir,et al.  A Low-Cost CMOS-MEMS Piezoresistive Accelerometer with Large Proof Mass , 2011, Sensors.

[24]  Yulong Zhao,et al.  Incorporation of the stress concentration slots into the flexures for a high-performance microaccelerometer. , 2012, The Review of scientific instruments.

[25]  Yulong Zhao,et al.  A Novel Integrated Multifunction Micro-Sensor for Three-Dimensional Micro-Force Measurements , 2012, Sensors.

[26]  Xuesong Mei,et al.  An improved holospectrum-based balancing method for rotor systems with anisotropic stiffness , 2013 .