Seismic Behaviour of Different Bracing Systems in High Rise 2-D Steel Buildings

[1]  Egor P. Popov,et al.  Characteristics of eccentrically braced frames , 1984 .

[2]  J. Datio Aristizabal‐Ochoa.  Disposable Knee Bracing: Improvement in Seismic Design of Steel Frames , 1986 .

[3]  Farzad Naeim,et al.  The Seismic Design Handbook , 1989 .

[4]  Thambirajah Balendra,et al.  Preliminary studies into the behaviour of knee braced frames subject to seismic loading , 1991 .

[5]  C. Y. Liaw,et al.  Design of earthquake-resistant steel frames with knee bracing , 1991 .

[6]  C. Y. Liaw,et al.  Earthquake-resistant steel frames with energy dissipating knee elements , 1995 .

[7]  Helmut Krawinkler,et al.  PROS AND CONS OF A PUSHOVER ANALYSIS OF SEISMIC PERFORMANCE EVALUATION , 1998 .

[8]  Amr S. Elnashai,et al.  Advanced inelastic static (pushover) analysis for earthquake applications , 2001 .

[9]  Anil K. Chopra,et al.  A modal pushover analysis procedure for estimating seismic demands for buildings , 2002 .

[10]  Robert Tremblay,et al.  Inelastic seismic response of steel bracing members , 2002 .

[11]  Reza Akbari,et al.  SEISMIC BEHAVIOUR FACTOR, R, FOR STEEL X-BRACED AND KNEE-BRACED RC BUILDINGS , 2003 .

[12]  Robert Tremblay,et al.  SEISMIC RESPONSE OF CONCENTRICALLY BRACED STEEL FRAMES MADE WITH RECTANGULAR HOLLOW BRACING MEMBERS , 2003 .

[13]  Durgesh C. Rai,et al.  Seismic evaluation and upgrading of chevron braced frames , 2003 .

[14]  Anil K. Chopra,et al.  Evaluation of Modal and FEMA Pushover Analyses: SAC Buildings , 2004 .

[15]  Cheol-Ho Lee,et al.  Elastic seismic design of steel high-rise buildings in regions of strong wind and moderate seismicity , 2007 .

[16]  Faramarz Khoshnoudian,et al.  Assessment of conventional nonlinear static procedures with FEMA load distributions and modal pushover analysis for high-rise buildings , 2008 .

[17]  Roberto T. Leon,et al.  Design and behavior of zipper-braced frames , 2008 .

[18]  Roberto T. Leon,et al.  Pushover Response of a Braced Frame with Suspended Zipper Struts , 2008 .

[19]  Gholamreza Nouri,et al.  The Applicability of the Zipper Strut to Seismic Rehabilitation of Steel Structures , 2009 .

[20]  Y. Araki,et al.  Dynamic Instability in High-Rise SMRFs Subjected to Long-Period Ground Motions , 2011 .

[21]  Dimitrios G. Lignos,et al.  Numerical and experimental evaluation of seismic capacity of high-rise steel buildings subjected to long duration earthquakes , 2011 .

[22]  Helmut Krawinkler,et al.  Deterioration Modeling of Steel Components in Support of Collapse Prediction of Steel Moment Frames under Earthquake Loading , 2011 .

[23]  R. Landolfo,et al.  Modelling aspects of the seismic response of steel concentric braced frames , 2013 .

[24]  Raffaele Landolfo,et al.  The influence of out‐of‐straightness imperfection in physical theory models of bracing members on seismic performance assessment of concentric braced structures , 2015 .