Can envelope codes reduce electricity and CO2 emissions in different types of buildings in the hot climate of Bahrain

The depletion of non-renewable resources and the environmental impact of energy consumption, particularly energy use in buildings, have awakened considerable interest in energy efficiency. Building energy codes have recently become effective techniques to achieve efficiency targets. The Electricity and Water Authority in Bahrain has set a target of 40% reduction of building electricity consumption and CO2 emissions to be achieved by using envelope thermal insulation codes. This paper investigates the ability of the current codes to achieve such a benchmark and evaluates their impact on building energy consumption. The results of a simulation study are employed to investigate the impact of the Bahraini codes on the energy and environmental performance of buildings. The study focuses on air-conditioned commercial buildings and concludes that envelope codes, at best, are likely to reduce the energy use of the commercial sector by 25% if the building envelope is well-insulated and efficient glazing is used. Bahraini net CO2 emissions could drop to around 7.1%. The simulation results show that the current energy codes alone are not sufficient to achieve a 40% reduction benchmark, and therefore, more effort should be spent on moving towards a more comprehensive approach.

[1]  Saleh A. Al-Ajlan,et al.  Measurements of thermal properties of insulation materials by using transient plane source technique , 2006 .

[2]  M.A.Eben Saleh Impact of thermal insulation location on buildings in hot dry climates , 1990 .

[3]  L. J. Grobler,et al.  A new and innovative look at anti-insulation behaviour in building energy consumption , 2008 .

[4]  Danny H.W. Li,et al.  Daylighting and its implications to overall thermal transfer value (OTTV) determinations , 2002 .

[5]  Mohammad S. Al-Homoud,et al.  Parametric analysis of alternative energy conservation measures in an office building in hot and humid climate , 2007 .

[6]  Mohammad S. Al-Homoud,et al.  Performance characteristics and practical applications of common building thermal insulation materials , 2005 .

[7]  M. F. Zedan,et al.  Effect of electricity tariff on the optimum insulation-thickness in building walls as determined by a dynamic heat-transfer model , 2005 .

[8]  Mohammad S. Al-Homoud,et al.  The Effectiveness of Thermal Insulation in Different Types of Buildings in Hot Climates , 2004 .

[9]  A. R. Khaled,et al.  The role of expandable thermal systems in improving performance of thermal devices , 2007 .

[10]  Khalifa S. Al-Jabri,et al.  Concrete Blocks for Thermal Insulation in Hot Climate , 2005 .

[11]  Mohsen M. Aboulnaga Towards green buildings: Glass as a building element—the use and misuse in the gulf region , 2006 .

[12]  Victor C. H. Yeung,et al.  Implementing building energy codes in Hong Kong: energy savings, environmental impacts and cost , 2005 .

[13]  G. P. Maheshwari,et al.  Impact of energy-conservation measures on cooling load and air-conditioning plant capacity , 2001 .

[14]  Liu Yang,et al.  Building energy efficiency in different climates , 2008 .

[15]  Hassan Radhi,et al.  A systematic methodology for optimising the energy performance of buildings in Bahrain , 2008 .

[16]  F. Al-Ragom,et al.  On the effect of glazing and code compliance , 2002 .

[17]  Milorad Bojić,et al.  Thermal insulation of cooled spaces in high rise residential buildings in Hong Kong , 2002 .

[18]  Ray Tricker Building Regulations in Brief , 2003 .

[19]  Joseph C. Lam,et al.  Energy analysis of commercial buildings in subtropical climates , 2000 .

[20]  Francis W.H. Yik,et al.  An evaluation of the appropriateness of using overall thermal transfer value (OTTV) to regulate envelope energy performance of air-conditioned buildings , 2004 .

[21]  Farraj F. Al-ajmi,et al.  Simulation of energy consumption for Kuwaiti domestic buildings , 2008 .

[22]  Philip C.H. Yu,et al.  Controlling building energy use by Overall Thermal Transfer Value (OTTV) , 2000 .

[23]  Wan Ki Chow,et al.  Optimum insulation-thickness for thermal and freezing protection , 2005 .