Scrutinization of Slip Due to Lateral Velocity on the Dynamics of Engine Oil Conveying Cupric and Alumina Nanoparticles Subject to Coriolis Force

This study is an attempt to investigate the three-dimensional flow of engine oil-based nanofluid under the impact of rotation and partial slip phenomenon over a stretchable surface. Partial slip condition is incorporated into the system at boundaries and the arising quotient of angular speed to stretching constant is regarded as rotation impression on freely moving three-dimensional flow of copper oxide-engine oil and aluminum oxide-engine oil nanofluid. The designed problem has been tackled numerically with the boundary value problem technique, this numerical mechanism requires one to transform the flow governing highly nonlinear PDEs into first-order differential equations along with associated boundary conditions. This procedure is carried out by employing a suitable similarity transformation. The investigation determines the impact of slip and rotation on primary and secondary velocity profiles, shear stress rates, and heat transfer coefficient. Minimum skin friction and Maximum Nusselt number has been observed for CuO − Engine Oil nanofluid under partial slip parameter as compared to Al 2 O 3 − Engine Oil nanofluid. Reduced skin coefficients were achieved for both nanofluids. Moreover, the outcomes of the study have been related with already available literature and were found in good agreement.

[1]  T. Abdeljawad,et al.  Heat and mass transfer analysis above an unsteady infinite porous surface with chemical reaction , 2022, Case Studies in Thermal Engineering.

[2]  A. Hussain,et al.  Mass and Heat Transport Assessment and Nanomaterial Liquid Flowing on a Rotating Cone: A Numerical Computing Approach , 2022, Nanomaterials.

[3]  A. Elfasakhany,et al.  Heat Transfer Analysis of Nanostructured Material Flow over an Exponentially Stretching Surface: A Comparative Study , 2022, Nanomaterials.

[4]  H. Zahran,et al.  Numerical and Thermal Investigation of Magneto-Hydrodynamic Hybrid Nanoparticles (SWCNT-Ag) under Rosseland Radiation: A Prescribed Wall Temperature Case , 2022, Nanomaterials.

[5]  I. Ahmad,et al.  Prediction of Pile Bearing Capacity Using XGBoost Algorithm: Modeling and Performance Evaluation , 2022, Applied Sciences.

[6]  M. Niekurzak,et al.  Assessment of the Possibility of Using Various Types of Renewable Energy Sources Installations in Single-Family Buildings as Part of Saving Final Energy Consumption in Polish Conditions , 2022, Energies.

[7]  Fuzhang Wang,et al.  LSM and DTM-Pade approximation for the combined impacts of convective and radiative heat transfer on an inclined porous longitudinal fin , 2022, Case Studies in Thermal Engineering.

[8]  M. Elkotb,et al.  Thermal energy investigation of magneto-hydrodynamic nano-material liquid flow over a stretching sheet: comparison of single and composite particles , 2022, Alexandria Engineering Journal.

[9]  A. Hussain,et al.  Heat transport investigation of hybrid nanofluid (Ag-CuO) porous medium flow: Under magnetic field and Rosseland radiation , 2022, Ain Shams Engineering Journal.

[10]  A. Hussain,et al.  Thermophoresis and Brownian Effect for Chemically Reacting Magneto-Hydrodynamic Nanofluid Flow across an Exponentially Stretching Sheet , 2021, Energies.

[11]  R. T. Matoog,et al.  Numerical simulation and thermal enhancement of multi-based nanofluid over an embrittled cone , 2021, Case Studies in Thermal Engineering.

[12]  T. N. Gia,et al.  Heat transport investigation of engine oil based rotating nanomaterial liquid flow in the existence of partial slip effect , 2021, Case Studies in Thermal Engineering.

[13]  P. Olczak,et al.  Prediction of Ultimate Bearing Capacity of Shallow Foundations on Cohesionless Soils: A Gaussian Process Regression Approach , 2021, Applied Sciences.

[14]  Hijaz Ahmad,et al.  Heat transport investigation of magneto-hydrodynamics (SWCNT-MWCNT) hybrid nanofluid under the thermal radiation regime , 2021 .

[15]  Hijaz Ahmad,et al.  Heat transportation enrichment and elliptic cylindrical solution of time-dependent flow , 2021 .

[16]  Kottakkaran Sooppy Nisar,et al.  Computational Investigation of the Combined Impact of Nonlinear Radiation and Magnetic Field on Three-Dimensional Rotational Nanofluid Flow across a Stretchy Surface , 2021, Processes.

[17]  Amira A. Ishan,et al.  Three-Dimensional Water-Based Magneto-Hydrodynamic Rotating Nanofluid Flow over a Linear Extending Sheet and Heat Transport Analysis: A Numerical Approach , 2021, Energies.

[18]  A. Hussain,et al.  Heat Transmission of Engine-Oil-Based Rotating Nanofluids Flow with Influence of Partial Slip Condition: A Computational Model , 2021, Energies.

[19]  Ali Hussain,et al.  Comsolic solution of an elliptic cylindrical compressible fluid flow , 2021, Scientific Reports.

[20]  S. Abo‐Dahab,et al.  Influence of MWCNT/Fe3O4 hybrid nanoparticles on an exponentially porous shrinking sheet with chemical reaction and slip boundary conditions , 2021, Journal of Thermal Analysis and Calorimetry.

[21]  G. Mckay,et al.  Performance investigation of multiwall carbon nanotubes based water/oil nanofluids for high pressure and high temperature solar thermal technologies for sustainable energy systems , 2020 .

[22]  Heydar Maddah,et al.  Modeling of heat transfer performance of carbon nanotube nanofluid in a tube with fixed wall temperature by using ANN–GA , 2020 .

[23]  Liaqat Ali,et al.  Finite Element Simulation of Multi-Slip Effects on Unsteady MHD Bioconvective Micropolar Nanofluid Flow Over a Sheet with Solutal and Thermal Convective Boundary Conditions , 2019 .

[24]  N. Sandeep,et al.  Influence of viscous dissipation on MHD flow of micropolar fluid over a slendering stretching surface with modified heat flux model , 2019, Journal of Thermal Analysis and Calorimetry.

[25]  Seyed Amin Bagherzadeh,et al.  A novel sensitivity analysis model of EANN for F-MWCNTs–Fe3O4/EG nanofluid thermal conductivity: Outputs predicted analytically instead of numerically to more accuracy and less costs , 2019, Physica A: Statistical Mechanics and its Applications.

[26]  Fateh Mebarek-oudina,et al.  Convective heat transfer of Titania nanofluids of different base fluids in cylindrical annulus with discrete heat source , 2018, Heat Transfer-Asian Research.

[27]  M. Tawfik.  Experimental studies of nanofluid thermal conductivity enhancement and applications: A review , 2017 .

[28]  Sachin Shaw,et al.  3D Casson fluid flow past a porous linearly stretching sheet with convective boundary condition , 2015 .

[29]  Liancun Zheng,et al.  Heat transfer in pseudo-plastic non-Newtonian fluids with variable thermal conductivity , 2011 .

[30]  Tiegang Fang,et al.  Viscous Flow with Second-Order Slip Velocity over a Stretching Sheet , 2010 .

[31]  Thirumalachari Sundararajan,et al.  An experimental investigation into the thermal conductivity enhancement in oxide and metallic nanofluids , 2010 .

[32]  G. Nath,et al.  Analytical solution of unsteady three-dimensional MHD boundary layer flow and heat transfer due to impulsively stretched plane surface , 2009 .

[33]  C. Wang.  Analysis of viscous flow due to a stretching sheet with surface slip and suction , 2009 .

[34]  I. Pop,et al.  Three-dimensional flow over a stretching surface in a viscoelastic fluid , 2008 .

[35]  I. Pop,et al.  Unsteady boundary layer flow due to a stretching surface in a rotating fluid , 2004 .

[36]  B. S. Dandapat,et al.  Heat transfer in a liquid film on an unsteady stretching surface , 2000 .

[37]  G. Nath,et al.  Unsteady flow over a stretching surface with a magnetic field in a rotating fluid , 1998 .

[38]  S. Venkateswaran,et al.  Three-Dimensional Unsteady Flow With Heat and Mass Transfer Over a Continuous Stretching Surface , 1988 .

[39]  Chang Y. Wang,et al.  Stretching a surface in a rotating fluid , 1988 .

[40]  L. Crane.  Flow past a stretching plate , 1970 .