Refined multilayered plate elements based on Murakami zig–zag functions

This paper discusses the FEM use of Murakami zig–zag function (MZZF) in the two-dimensional modeling of multilayered plates. A literature overview is first conducted on the available works in which MZZF has been applied. MZZF is used to introduce the zig–zag effect in classical and higher order theories, which are formulated using only displacements as unknowns. MZZF is also considered to introduce the zig–zag effect in those theories, which are formulated on the basis of both displacement and transverse stress assumptions (mixed formulations). The present FEM formulation is validated by comparing the results with some available papers from the literature. A very thick plate (a/h = 4) is studied and the results are compared with the commercial code NASTRAN. Numerical results are presented to show both the effectiveness and limitations of MZZF in the modeling of layered plates. Linear up to forth order expansion for in-plane and out-of-plane displacements, in the thickness plate direction, has been compared. It has been concluded that MZZF consists of a valuable tool to enhance the performances of both classical and advanced theories. In particular, the conducted numerical evaluations have shown that it can be more convenient to enhance a plate theory by introducing the MZZF than refining it by adding two or three higher order terms. However, in order to well approximate local effects or study thick plates, advanced models (layer-wise or three-dimensional) are required. � 2004 Elsevier Ltd. All rights reserved.

[1]  T. K. Varadan,et al.  A higher-order theory for bending analysis of laminated shells of revolution , 1991 .

[2]  Koganti M. Rao,et al.  Analysis of thick laminated anisotropic composite plates by the finite element method , 1990 .

[3]  E. Carrera.  Developments, ideas, and evaluations based upon Reissner’s Mixed Variational Theorem in the modeling of multilayered plates and shells , 2001 .

[4]  E. Carrera.  Historical review of Zig-Zag theories for multilayered plates and shells , 2003 .

[5]  Erasmo Carrera,et al.  Classical and advanced multilayered plate elements based upon PVD and RMVT. Part 1: Derivation of finite element matrices , 2002 .

[6]  E. Reissner.  On a certain mixed variational theorem and a proposed application , 1984 .

[7]  E. Carrera.  Theories and finite elements for multilayered, anisotropic, composite plates and shells , 2002 .

[8]  Hidenori Murakami,et al.  A high-order laminated plate theory with improved in-plane responses☆ , 1987 .

[9]  J. Reddy.  Mechanics of laminated composite plates and shells : theory and analysis , 1996 .

[10]  Hidenori Murakami,et al.  Laminated Composite Plate Theory With Improved In-Plane Responses , 1986 .

[11]  Erasmo Carrera,et al.  Multilayered Finite Plate Element based on Reissner Mixed Variational Theorem. Part I: Theory., , 2002 .

[12]  N. Pagano,et al.  Exact Solutions for Composite Laminates in Cylindrical Bending , 1969 .

[13]  Ferdinando Auricchio,et al.  Refined First-Order Shear Deformation Theory Models for Composite Laminates , 2003 .

[14]  Moussa Karama,et al.  Comparison of various laminated plate theories , 1997 .

[15]  J. Reddy.  Mechanics of laminated composite plates : theory and analysis , 1997 .

[16]  Erasmo Carrera,et al.  Multilayered shell finite element with interlaminar continuous shear stresses : a refinement of the Reissner-Mindlin formulation , 2000 .

[17]  Erasmo Carrera,et al.  Multilayered Finite Plate Element based on Reissner Mixed Variational Theorem. Part II: Numerical Analysis, , 2002 .

[18]  E. Carrera,et al.  An evaluation of geometrical nonlinear effects of thin and moderately thick multilayered composite shells , 1997 .

[19]  J. Ren,et al.  A new theory of laminated plate , 1986 .

[20]  S. A. Ambartsumyan,et al.  Theory of anisotropic shells , 1964 .

[21]  E. Carrera.  Theories and Finite Elements for Multilayered Plates and Shells:A Unified compact formulation with numerical assessment and benchmarking , 2003 .

[22]  Hung-Sying Jing,et al.  Refined shear deformation theory of laminated shells , 1993 .

[23]  E. Carrera.  A study of transverse normal stress effect on vibration of multilayered plates and shells , 1999 .

[24]  E. Carrera.  On the use of the Murakami's zig-zag function in the modeling of layered plates and shells , 2004 .