The Prediction of Interior Noise of Propeller-Driven Aircraft: A Review

[1]  R. Vaicaitis,et al.  Cabin Noise Control for Twin Engine General Aviation Aircraft , 1982 .

[2]  Eric E. Ungar,et al.  A Guide for Estimation of Aeroacoustic Loads on Flight Vehicle Surfaces , 1977 .

[3]  J. S. Mixson,et al.  Acceleration response of fuselage sidewall panels on a twin-engine, light aircraft , 1981 .

[4]  R. Vaicaitis,et al.  Noise transmission and attenuation by stiffened panels , 1980 .

[5]  J. D. Revell,et al.  Analysis of Interior Noise-Control Treatments for High-speed Propeller-Driven Aircraft , 1982 .

[6]  Rama B. Bhat,et al.  A THEORETICAL INVESTIGATION OF NOISE REDUCTION THROUGH THE CYLINDRICAL FUSELAGE OF A TWIN-ENGINE, PROPELLER-DRIVEN AIRCRAFT , 1978 .

[7]  A. Craggs,et al.  The use of simple three-dimensional acoustic finite elements for determining the natural modes and frequencies of complex shaped enclosures , 1972 .

[8]  F. Farassat,et al.  User's manual for a computer program to calculate discrete frequency noise of conventional and advanced propellers , 1981 .

[9]  M. R. Peterson,et al.  Free vibrations of circular cylinders with longitudinal, interior partitions , 1978 .

[10]  R. Vaicaitis.  Noise transmission into a light aircraft , 1980 .

[11]  John F. Wilby,et al.  Prediction of the acoustic environment in the Space Shuttle payload bay , 1980 .

[12]  B . Magliozzi.  Acoustic pressures on a prop-fan aircraft fuselage surface , 1980 .

[13]  J. F. Wilby,et al.  Band-limited power flow into enclosures , 1977 .

[14]  E. G. Wilby,et al.  Analytical prediction of the interior noise for cylindrical models of aircraft fuselages for prescribed exterior noise fields. Phase 2: Models for sidewall trim, stiffened structures and cabin acoustics with floor partition , 1982 .

[15]  E. G. Wilby,et al.  Aircraft interior noise models: Sidewall trim, stiffened structures, and cabin acoustics with floor partition , 1983 .

[16]  D. C. Rennison,et al.  Development and validation of preliminary analytical models for aircraft interior noise prediction , 1982 .

[17]  Leslie Robert Koval,et al.  On sound transmission into a thin cylindrical shell under “flight conditions” , 1976 .

[18]  D. C. Rennison,et al.  Analytical prediction of the interior noise for cylindrical models of aircraft fuselages for prescribed exterior noise fields. Phase 1: Development and validation of preliminary analytical models , 1980 .

[19]  R. Prydz,et al.  Experimental and predicted noise reduction of stiffened and unstiffened cylinders with and without a limp inner wall , 1981 .

[20]  C. K. Barton,et al.  Characteristics of Propeller Noise on an Aircraft Fuselage , 1981 .

[21]  J. D. Revell,et al.  Interior Noise Control by Fuselage Design for High-Speed Propeller-Driven Aircraft , 1982 .

[22]  Leslie Robert Koval,et al.  On sound transmission into a stiffened cylindrical shell with rings and stringers treated as discrete elements , 1980 .

[23]  J. F. Wilby,et al.  Vibration measurements of an airplane fuselage structure II. Jet noise excitation , 1972 .

[24]  J. Lea,et al.  A finite element method for determining the acoustic modes of irregular shaped cavities , 1976 .

[25]  J. F. Unruh.  Structure-Borne Noise Prediction for a Single-Engine General Aviation Aircraft , 1981 .

[26]  Donald J. Nefske,et al.  Structural-acoustic finite element analysis of the automobile passenger compartment: A review of current practice , 1982 .