Modeling of Grid-connected with Permanent Magnet Synchronous Generator (PMSG) Using Voltage Vector Control

Abstract This paper presents the modeling of 2 sets power converter capacity 20 kW, which one has connected with the permanent magnet synchronous generator (PMSG) side and the other one, has connected to the grid side. This system is use for small hydropower (SHP) applications. In order to be able to implement the control algorithm, 20 kW PMSG is model based on synchronous reference frame and designed in Matlab/Simulink. The simulation results show the electrical power flow from the generator system fed in to the grid side. The DC Link voltage must be keep constant value during the operation time. This model is able to use for implementation in the laboratory on future work.

[1]  J.C. Clare,et al.  Vector controlled induction machines for stand-alone wind energy applications , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[2]  Frede Blaabjerg,et al.  Overview of Control and Grid Synchronization for Distributed Power Generation Systems , 2006, IEEE Transactions on Industrial Electronics.

[3]  F. Blaabjerg,et al.  Flexible control of small wind turbines with grid failure detection operating in stand-alone and grid-connected mode , 2004, IEEE Transactions on Power Electronics.

[4]  Bimal K. Bose.  Energy, environment, and advances in power electronics , 2000 .