Numerical simulation of resistivity LWD tool based on higher-order vector finite element

Numerical simulation of resistivity logging-while-drilling (LWD) tool response in complex borehole environments is of great importance for interpretation of measurement data and characterization of oil reservoirs. The simulation results can provide important theoretical guidance for designing novel electrical logging instruments and interpreting real-time logging data. In this paper, higher-order vector finite element method had been used to investigate the resistivity LWD tool response by changing coils spacing, transmitting frequency and structure of antenna system in the anisotropic formation. Numerical simulation results indicate that the change of T–R1 spacing is an obvious influence on the investigation depth and detecting precision of the resistivity LWD tool, and the change of R1–R2 spacing can affect the resolution of the thin-layer distinguish. The change of transmitting frequency can improve the resolution of low-resistivity formation and high-resistivity formation of resistivity LWD tool. The change of the structure of the antenna system can provide accurate geosteering drilling information to directional resistivity LWD tool. Simulation results also indicated that the higher-order vector finite element method has good convergence speed and calculation accuracy and it is suitable to simulate the response of resistivity LWD tools.

[1]  Xiaohui Chen,et al.  The High Accuracy Simulation of Resistivity LWD Electric Field Using Self-Adaptive hp-FEM , 2010, 2010 International Conference on Measuring Technology and Mechatronics Automation.

[2]  Tomás Vejchodský,et al.  Modular hp-FEM system HERMES and its application to Maxwell's equations , 2007, Math. Comput. Simul..

[3]  Qing Huo Liu,et al.  Applications of the BCGS-FFT method to 3-D induction well logging problems , 2003, IEEE Trans. Geosci. Remote. Sens..

[4]  Leszek F. Demkowicz,et al.  A Fully Automatic hp-Adaptivity , 2002, J. Sci. Comput..

[5]  Ivo Babuška,et al.  The h-p version of the finite element method , 1986 .

[6]  David Pardo,et al.  A self-adaptive goal-oriented hp-finite element method with electromagnetic applications. Part II: Electrodynamics , 2007 .

[7]  Tsili Wang,et al.  Finite-difference modeling of electromagnetic tool response for logging while drilling , 2004 .

[8]  Hui Li,et al.  Numerical Simulation of a Multi-Frequency Resistivity Logging-While-Drilling Tool Using a Highly Accurate and Adaptive Higher-Order Finite Element Method , 2012 .

[9]  Tan Maojin.  Introduction to Numerical Simulation of Electrical Logging and Its Development Trend , 2010 .

[10]  Jing Li,et al.  A three-dimensional transmission line matrix method (TLM) for simulations of logging tools , 2000, IEEE Trans. Geosci. Remote. Sens..

[11]  L. Demkowicz,et al.  Modeling of electromagnetic absorption/scattering problems using hp-adaptive finite elements , 1998 .

[12]  Ivo Dolezel,et al.  Arbitrary-level hanging nodes and automatic adaptivity in the hp-FEM , 2008, Math. Comput. Simul..

[13]  Fernando L. Teixeira,et al.  Three-dimensional simulation of eccentric LWD tool response in boreholes through dipping formations , 2005, IEEE Transactions on Geoscience and Remote Sensing.

[15]  Sun Xiang.  The electromagnetic modeling of logging-while-drilling tool in tilted anisotropic formations using vector finite element method , 2008 .