Effect of flash boiling on microscopic and macroscopic spray characteristics in optical GDI engine
暂无分享,去创建一个
Zhi Wang | Hongming Xu | Xiao Ma | Yanfei Li | Hongming Xu | Xiao Ma | Zhi Wang | Jian-xin Wang | Yanfei Li | Jianxin Wang | Hengjie Guo | Shuai Liang | Hengjie Guo | Shuai Liang
[1] Tianyou Wang,et al. An Experimental Study on Microscopic Characteristics of Flash Boiling Spray With Extended Glare Point Velocimetry and Sizing , 2016 .
[2] Hongming Xu,et al. Droplet dynamics of DI spray from sub-atmospheric to elevated ambient pressure , 2016 .
[3] M. Wensing,et al. Flashboiling-induced targeting changes in gasoline direct injection sprays , 2016 .
[4] Shiyang Li,et al. Correlation analysis of superheated liquid jet breakup to bubble formation in a transparent slit nozzle , 2015 .
[5] Sebastian Bornschlegel,et al. Investigation of Jet-to-Jet Interaction in Sprays for DISI Engines , 2015 .
[6] Shiyang Li,et al. Quantitative observation on breakup of superheated liquid jet using transparent slit nozzle , 2015 .
[7] P. Aleiferis,et al. On the Effect of Ambient Turbulence and Thermodynamic Conditions on Fuel Spray Development for Direct-Injection Spark-Ignition Engines , 2015 .
[8] Zhi Wang,et al. Analysis of pre-ignition to super-knock: Hotspot-induced deflagration to detonation , 2015 .
[9] Changzhao Jiang,et al. An optical study of in-cylinder CH2O and OH chemiluminescence in flame-induced reaction front propagation using high speed imaging , 2014 .
[10] Qing Nian Chan,et al. Effects of injection pressure on the structural transformation of flash-boiling sprays of gasoline and ethanol in a spark-ignition direct-injection (SIDI) engine , 2014 .
[11] Muh-Rong Wang,et al. Effects of superheat on characteristics of flashing spray and snow particles produced by expanding liquid carbon dioxide , 2013 .
[12] Min Xu,et al. Flash Boiling: Easy and Better Way to Generate Ideal Sprays than the High Injection Pressure , 2013 .
[13] P. Aleiferis,et al. An analysis of spray development with iso-octane, n-pentane, gasoline, ethanol and n-butanol from a multi-hole injector under hot fuel conditions , 2013 .
[14] Guo Liejin,et al. An Experimental Study on the Spray and Thermal Characteristics of R134a Two-Phase Flashing Spray , 2012 .
[15] Shijin Shuai,et al. Co-evaporative multi-component fuel design for in-cylinder PLIF measurement and application in gasoline direct injection research , 2011 .
[16] P. Koch,et al. Study of the mixture formation processes inside a modern direct-injection gasoline engine , 2010 .
[17] P. Aleiferis,et al. Effect of fuel temperature on in-nozzle cavitation and spray formation of liquid hydrocarbons and alcohols from a real-size optical injector for direct-injection spark-ignition engines , 2010 .
[18] Paul Ewart,et al. Quantitative planar laser-induced fluorescence imaging of multi-component fuel/air mixing in a firing gasoline-direct-injection engine: Effects of residual exhaust gas on quantitative PLIF , 2010 .
[19] P. Aleiferis,et al. Cavitation, primary break-up and flash boiling of gasoline, iso-octane and n-pentane with a real-size optical direct-injection nozzle , 2010 .
[20] Su Han Park,et al. Comparison of experimental and predicted atomization characteristics of high-pressure diesel spray under various fuel and ambient temperature , 2010 .
[21] P. Aleiferis,et al. Mechanisms of spray formation and combustion from a multi-hole injector with E85 and gasoline , 2010 .
[22] Geanette Polanco,et al. General review of flashing jet studies. , 2010, Journal of hazardous materials.
[23] Zuo-hua Huang,et al. Combustion characteristics of methanol–air and methanol–air–diluent premixed mixtures at elevated temperatures and pressures , 2009 .
[24] E. Sher,et al. Flash-boiling atomization , 2008 .
[25] A E Holdo,et al. Modelling the dispersion of flashing jets using CFD. , 2008, Journal of hazardous materials.
[26] B. Shekunov,et al. Modelling of spray-freezing with compressed carbon dioxide , 2006 .
[27] Cyril Crua,et al. PDA Characterisation of Dense Diesel Sprays Using a Common-Rail Injection System , 2003 .
[28] A. Coghe,et al. Effects of Fuel Temperature and Ambient Pressure on a GDI Swirled Injector Spray , 2000 .
[29] David L. Harrington,et al. Automotive Spark-Ignited Direct-Injection Gasoline Engines , 2000 .
[30] C. Arcoumanis,et al. Mixture preparation strategies in an optical four-valve port-injected gasoline engine , 2000 .
[31] John B. Heywood,et al. Liquid Fuel Transport Mechanisms into the Cylinder of a Firing Port-Injected SI Engine During Start Up , 1997 .
[32] Tianyu Li,et al. EFFECT OF NOZZLE CONFIGURATION ON MACROSCOPIC SPRAY CHARACTERISTICS OF MULTI-HOLE FUEL INJECTORS UNDER SUPERHEATED CONDITIONS , 2016 .
[33] Zhi Wang,et al. Suppression of super-knock in TC-GDI engine using two-stage injection in intake stroke (TSII) , 2014 .
[34] G. Wigley,et al. THE EFFECT OF FLASH BOILING ON THE ATOMIZATION PERFORMANCE OF GASOLINE DIRECT INJECTION MULTISTREAM INJECTORS , 2014 .
[35] B. Weigand,et al. Towards a unified treatment of fully flashing sprays , 2014 .
[36] Tianyou Wang,et al. AN EXPERIMENT STUDY ON PHENOMENON AND MECHANISM OF FLASH BOILING SPRAY FROM A MULTI-HOLE GASOLINE DIRECT INJECTOR , 2013 .
[37] Min Xu,et al. MACROSCOPIC CHARACTERIZATION OF FLASH-BOILING MULTIHOLE SPRAYS USING PLANAR LASER-INDUCED EXCIPLEX FLUORESCENCE. PART II: CROSS-SECTIONAL SPRAY STRUCTURE , 2013 .
[38] Min Xu,et al. Laser sheet dropsizing of evaporating sprays using simultaneous LIEF/MIE techniques , 2013 .
[39] Min Xu,et al. MACROSCOPIC CHARACTERIZATION OF FLASH-BOILING MULTI-HOLE SPRAYS USING PLANAR LASER INDUCED EXCIPLEX FLUORESCENCE TECHNIQUE. PART I. ON-AXIS SPRAY STRUCTURE , 2012 .
[40] Simone Hochgreb,et al. The effect of fuel volatility on sprays from high-pressure swirl injectors , 1998 .
[41] Graham Wigley,et al. Velocity and Drop Size Measurements in Fuel Sprays in a direct injection diesel engine , 1990 .