Thin-disk laser-pumping of ytterbium-doped fiber laser

We report on an ytterbium-doped fiber laser (FL) remotely pumped by a commercial Yb:YAG thin-disk laser with a beam parameter product of 4 mm mrad and an emission wavelength of 1030 nm. The pump light absorption is 1.4 dB/m, which is 77 times lower than the peak value at 976 nm. The high-brilliance pumped fiber laser with a double pass of the pump light yielded a maximum output power of 1008 W out of 1264 W pump power. Despite the low pump absorption at 1030 nm, this kW-fiber laser reaches an excellent optical-to-optical efficiency of 80%. This concept of high-brilliance pumping enables to overcome the nonlinear effects limiting high-power high-brightness beam delivery over long distances and offers a power scalability fiber lasers paired with flexibility in the application.

[1]  Qinghe Mao,et al.  Widely tunable continuous wave mid-IR DFG source based on fiber lasers and amplifiers , 2009 .

[2]  High power all-fiber structured supercontinuum source with variable spectral coverage , 2011 .

[3]  Zhigang Zhang,et al.  Mode-locked ytterbium-doped linear-cavity fiber laser operated at low repetition rate , 2009 .

[4]  D. Hanna,et al.  Ytterbium-doped fiber amplifiers , 1997 .

[5]  David J. Richardson,et al.  High power fiber lasers: current status and future perspectives [Invited] , 2010 .

[6]  J. Swiderski,et al.  Ytterbium-doped fiber amplifier with tunable repetition rate and pulse duration , 2010 .

[7]  Christoph Tillkorn,et al.  High-Power, High-Brightness Direct-Diode Lasers , 2010 .

[8]  S. Unger,et al.  Efficient Yb laser fibers with low photodarkening by optimization of the core composition. , 2008, Optics express.

[9]  P. Peterka,et al.  Long-period fiber grating as wavelength selective element in double-clad Yb-doped fiber-ring lasers , 2009, 0911.3958.

[10]  J. Rothhardt,et al.  Millijoule pulse energy high repetition rate femtosecond fiber chirped-pulse amplification system. , 2007, Optics letters.

[11]  David N. Payne,et al.  Multi-kilowatt Single-mode Ytterbium-doped Large-core Fiber Laser , 2009 .

[12]  S. Unger,et al.  Photodarkening in Yb doped fibers: experimental evidence of equilibrium states depending on the pump power. , 2007, Optics express.

[13]  J. Limpert,et al.  The Rising Power of Fiber Lasers and Amplifiers , 2007, IEEE Journal of Selected Topics in Quantum Electronics.

[14]  C. Codemard,et al.  Tandem Cladding-Pumping for Control of Excess Gain in Ytterbium-Doped Fiber Amplifiers , 2010, IEEE Journal of Quantum Electronics.

[15]  J. Fini,et al.  Intuitive modeling of bend distortion in large-mode-area fibers. , 2007, Optics letters.

[16]  Adolf Giesen,et al.  Scalable concept for diode-pumped high-power solid-state lasers , 1994 .

[17]  F. Laurell,et al.  Improved photodarkening resistivity in ytterbium-doped fiber lasers by cerium codoping. , 2009, Optics letters.

[18]  Harith Ahmad,et al.  Double‐clad erbium/ytterbium‐doped fiber laser with a fiber Bragg grating , 2009 .

[19]  M. Pal,et al.  Diode-pumped 1028 nm Ytterbium-doped fiber laser with near 90% slope efficiency , 2010 .

[20]  Mikko Söderlund,et al.  Photodarkening rate in Yb-doped silica fibers. , 2008, Applied optics.

[21]  Govind P. Agrawal,et al.  Nonlinear Fiber Optics , 1989 .

[22]  A. G. Kuznetsov,et al.  Q-switched fiber laser with spectral control for frequency doubling , 2010 .

[23]  S. Harun,et al.  The performance of double‐clad ytterbium‐doped fiber laser with different pumping wavelengths , 2009 .

[24]  T. Kimura,et al.  Bending loss of propagation modes in arbitrary-index profile optical fibers. , 1978, Applied optics.

[25]  Y. Jeong,et al.  Ytterbium-doped large-core fiber laser with 1.36 kW continuous-wave output power. , 2004, Optics express.

[26]  Alphan Sennaroglu,et al.  Solid-State Lasers and Applications , 2006 .

[27]  Minglun Gong,et al.  Single mode MOPA structured all-fiber Yb pulse fiber amplifier at low repetition , 2011 .