Control of a Non-uniform Flexible Beam: Identification of First Two Modes

[1]  K. Hong,et al.  Asymptotic stabilization of a nonlinear axially moving string by adaptive boundary control , 2010 .

[3]  Andrew J. Kurdila,et al.  『Fundamentals of Structural Dynamics』(私の一冊) , 2019, Journal of the Society of Mechanical Engineers.

[4]  Keum-Shik Hong,et al.  Dynamic models of axially moving systems: A review , 2020 .

[5]  Rong-Fong Fung,et al.  Dynamic model of an electromagnetic actuator for vibration control of a cantilever beam with a tip mass , 2005 .

[6]  Jianda Han,et al.  Active vibration control of a flexible beam using a non-collocated acceleration sensor and piezoelectric patch actuator , 2009 .

[7]  Hong Hee Yoo,et al.  VIBRATION ANALYSIS OF ROTATING CANTILEVER BEAMS , 1998 .

[8]  Darren M. Dawson,et al.  Lyapunov-Based Vibration Control of Translational Euler-Bernoulli Beams Using the Stabilizing Effect of Beam Damping Mechanisms , 2004 .

[9]  Shuzhi Sam Ge,et al.  Vibration Control of a Flexible Beam With Output Constraint , 2015, IEEE Transactions on Industrial Electronics.

[10]  Keum-Shik Hong,et al.  Control of Axially Moving Systems: A Review , 2019, International Journal of Control, Automation and Systems.

[11]  Keum-Shik Hong,et al.  Input shaping control of a nuclear power plant’s fuel transport system , 2014 .

[12]  Ming Jen Tan,et al.  Analysis of laminated composite beams and plates with piezoelectric patches using the element-free Galerkin method , 2002 .

[13]  B.A.H. Abbas,et al.  Dynamic stability of a rotating Timoshenko beam with a flexible root , 1986 .

[14]  K. Hong,et al.  Stabilization of an axially moving web via regulation of axial velocity , 2011 .

[15]  Keum-Shik Hong,et al.  Dynamics and Control of Industrial Cranes , 2019, Advances in Industrial Control.

[16]  Keum-Shik Hong,et al.  Open-Loop Vibration Control of an Underwater System: Application to Refueling Machine , 2017, IEEE/ASME Transactions on Mechatronics.

[17]  Nitesh P. Yelve,et al.  Active vibration control of cantilever beam by using PID based output feedback controller , 2012 .

[18]  H. Benaroya,et al.  DYNAMICS OF TRANSVERSELY VIBRATING BEAMS USING FOUR ENGINEERING THEORIES , 1999 .

[19]  Takashi Yokoyama,et al.  Vibrations of a hanging Timoshenko beam under gravity , 1990 .

[20]  Anders Brandt,et al.  Noise and Vibration Analysis: Signal Analysis and Experimental Procedures , 2011 .

[21]  G. R. Heppler,et al.  A Deformation Field for Euler–Bernoulli Beams with Applications to Flexible Multibody Dynamics , 2001 .

[22]  Zhang Tie,et al.  Time-optimal and Smooth Trajectory Planning for Robot Manipulators , 2020, International Journal of Control, Automation and Systems.

[23]  T. R. Kane,et al.  Dynamics of a cantilever beam attached to a moving base , 1987 .

[24]  Warren P. Seering,et al.  Preshaping Command Inputs to Reduce System Vibration , 1990 .

[25]  Kefu Liu,et al.  SYSTEM IDENTIFICATION AND MODEL REDUCTION FOR A SINGLE-LINK FLEXIBLE MANIPULATOR , 2001 .

[26]  Mohamed Ahmed Eshag,et al.  Robust Boundary Vibration Control of Uncertain Flexible Robot Manipulator with Spatiotemporally-varying Disturbance and Boundary Disturbance , 2021 .

[27]  Shiqian Chen,et al.  Modal identification of multi-degree-of-freedom structures based on intrinsic chirp component decomposition method , 2019, Applied Mathematics and Mechanics.

[28]  K. Hong,et al.  Simultaneous control of longitudinal and transverse vibrations of an axially moving string with velocity tracking , 2012 .

[29]  Xie Yong,et al.  Frequency Identification of Flexible Hub-Beam System Using Control Data , 2016 .

[30]  C. Kang,et al.  Analysis of a Generalized ZVD Shaper Using Impulse Vectors , 2020 .

[31]  Wei He,et al.  Reinforcement Learning Control of a Flexible Two-Link Manipulator: An Experimental Investigation , 2020, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[32]  Waion Wong,et al.  Suppression of random vibration in flexible structures using a hybrid vibration absorber , 2012 .

[33]  Qiang Huang,et al.  A modal parameter identification method of machine tools based on particle swarm optimization , 2019, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[34]  William Singhose,et al.  Command shaping for flexible systems: A review of the first 50 years , 2009 .

[35]  S. Khalili,et al.  Free vibration analysis of sandwich beam with FG core using the element free Galerkin method , 2009 .

[36]  Yun-Feng Dong,et al.  Three-dimensional vibration of rotating functionally graded beams , 2018 .

[37]  Takashi Yokoyama,et al.  Free vibration characteristics of rotating Timoshenko beams , 1988 .

[38]  Okyay Kaynak,et al.  Dynamical Modeling and Boundary Vibration Control of a Rigid-Flexible Wing System , 2020, IEEE/ASME Transactions on Mechatronics.

[39]  Hong Shen,et al.  Dynamic modeling and simulation of a rotating flexible hub-beam based on different discretization methods of deformation fields , 2020, Archive of Applied Mechanics.

[40]  Nuno M. M. Maia,et al.  Theoretical and Experimental Modal Analysis , 1997 .

[41]  Changyin Sun,et al.  Iterative Learning Control for a Flapping Wing Micro Aerial Vehicle Under Distributed Disturbances , 2019, IEEE Transactions on Cybernetics.

[42]  Wan Kyun Chung,et al.  NATURAL FREQUENCIES AND OPE–LOOP RESPONSES OF AN ELASTIC BEAM FIXED ON A MOVING CART AND CARRYING AN INTERMEDIATE LUMPED MASS , 2000 .

[43]  Keum-Shik Hong,et al.  Multivariable Adaptive Control of the Rewinding Process of a Roll-to-roll System Governed by Hyperbolic Partial Differential Equations , 2018, International Journal of Control, Automation and Systems.

[44]  Quoc Chi Nguyen,et al.  Neural Network-based Robust Anti-sway Control of an Industrial Crane Subjected to Hoisting Dynamics and Uncertain Hydrodynamic Forces , 2020, International Journal of Control, Automation and Systems.