Capillary Pressure and Wettability Behavior of CO 2 Sequestration in Coal at Elevated Pressures

Summary Enhanced coalbed-methane (ECBM) recovery combines recovery of methane (CH4) from coal seams with storage of carbon dioxide (CO2). The efficiency of ECBM recovery depends on the CO2 transfer rate between the macrocleats, via the microcleats to the coal matrix. Diffusive transport of CO2 in the small cleats is enhanced when the coal is CO2-wet. Indeed, for water-wet conditions, the small fracture system is filled with water and the rate of CO2 sorption and CH4 desorption is affected by slow diffusion of CO2. This work investigates the wetting behavior of coal using capillary pressures between CO2 and water, measured continuously as a function of water saturation at in-situ conditions. To facilitate the interpretation of the coal measurements, we also obtain capillary pressure curves for unconsolidated-sand samples. For medium- and high-rank coal, the primary drainage capillary pressure curves show a water-wet behavior. Secondary forcedimbibition experiments show that the medium-rank coal becomes CO2-wet as the CO2 pressure increases. High-rank coal is CO2-wet during primary imbibition. The imbibition behavior is in agreement with contact-angle measurements. Hence, we conclude that imbibition tests provide the practically relevant data to evaluate the wetting properties of coal.