Five-Phase Version of 12Slots/8Poles Three-Phase Synchronous Machine for Marine-Propulsion

This paper proposes a simple and effective scheme for Direct Torque Control (DTC) of Brushless DC Motor. Unlike the traditional DTC where both the torque and flux must to be employed in order to deliver the switching table for the inverter, the proposed DTC scheme utilizes only the torque information. By considering the particular operating principle of the motor, the instantaneous torque can be estimated only by using back EMF ratio in an unified differential equation. The simulation results have shown the good performance of the proposed scheme. It can be seen thus a very suitable technique for EV drives which need fast and precise torque response.

[1]  Franck Scuiller Développement d'outils de conception de Machines polyphasées à aimants utilisant l'Approche multimachine. , 2006 .

[2]  Nicola Bianchi,et al.  Theory and design of fractional-slot multilayer windings , 2011 .

[3]  Franck Scuiller,et al.  Multi-criteria-based design approach of multi-phase permanent magnet low-speed synchronous machines , 2009 .

[4]  Ayman M. El-Refaie,et al.  Fractional-Slot Concentrated-Windings Synchronous Permanent Magnet Machines: Opportunities and Challenges , 2010, IEEE Transactions on Industrial Electronics.

[5]  Nicola Bianchi,et al.  Rotor losses in fractional-slot three-phase and five-phase PM machines , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[6]  John E. Fletcher,et al.  Dual-Plane Vector Control of a Five-Phase Induction Machine for an Improved Flux Pattern , 2008, IEEE Transactions on Industrial Electronics.

[7]  Nicola Bianchi,et al.  Index of rotor losses in three-phase fractional-slot permanent magnet machines , 2009 .

[8]  N. Bianchi,et al.  Impact of MMF Space Harmonic on Rotor Losses in Fractional-Slot Permanent-Magnet Machines , 2009, IEEE Transactions on Energy Conversion.

[9]  Eric Semail,et al.  General Analytical Model of Magnet Average Eddy-Current Volume Losses for Comparison of Multiphase PM Machines With Concentrated Winding , 2014, IEEE Transactions on Energy Conversion.

[10]  L. Vido,et al.  Vectorial Modeling and Control of Multiphase Machines with Non-salient Poles Supplied by an Inverter , 2010 .

[11]  H. Toliyat,et al.  Five-phase permanent-magnet motor drives , 2005, IEEE Transactions on Industry Applications.

[12]  N. Bianchi,et al.  Considerations on Selecting Fractional-Slot Nonoverlapped Coil Windings , 2013, IEEE Transactions on Industry Applications.

[13]  Thomas A. Lipo,et al.  Analysis of a concentrated winding induction machine for adjustable speed drive applications. I. Motor analysis , 1991 .

[14]  Z. Zhu,et al.  Eddy-current loss in the rotor magnets of permanent-magnet brushless machines having a fractional number of slots per pole , 2005, IEEE Transactions on Magnetics.

[15]  T.A. Lipo,et al.  Torque density improvement in a six-phase induction motor with third harmonic current injection , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[16]  E. Semail,et al.  Slot/pole combinations choice for concentrated multiphase machines dedicated to mild-hybrid applications , 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.

[17]  Emil Levi,et al.  Multiphase Electric Machines for Variable-Speed Applications , 2008, IEEE Transactions on Industrial Electronics.

[18]  Hamid A. Toliyat,et al.  Rotor field oriented control of five-phase induction motor with the combined fundamental and third harmonic currents , 2001, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181).

[19]  Z. Q. Zhu,et al.  Simple and accurate analytical estimation of slotting effect on magnet loss in fractional-slot surface-mounted PM machines , 2012, 2012 XXth International Conference on Electrical Machines.

[20]  Nicola Bianchi,et al.  Slot Harmonic Impact on Rotor Losses in Fractional-Slot Permanent-Magnet Machines , 2012, IEEE Transactions on Industrial Electronics.