Numerical Analysis and Dynamic Response of Optimized Composite Cross Elliptical Pressure Hull Subject to Non-Contact Underwater Blast Loading

[1]  Chuangbing Zhou,et al.  Damage features of RC slabs subjected to air and underwater contact explosions , 2018 .

[2]  Ching-Yu Hsu,et al.  Study of the nonlinear responses of a submersible pressure hull , 1998 .

[4]  C. P. Vendhan,et al.  Non-linear transient dynamic response of rectangular plates under shock loading , 2000 .

[5]  Xiongliang Yao,et al.  The interaction of an underwater explosion bubble and an elastic–plastic structure , 2008 .

[6]  Mahmoud Helal,et al.  Numerical investigation of the dynamic response of optimized composite elliptical submersible pressure hull subjected to non-contact underwater explosion , 2015 .

[7]  Arun Shukla,et al.  Effect of plate curvature on blast response of carbon composite panels , 2013 .

[8]  C. T. Sun,et al.  Fluid-structure interaction analysis of a thick-section composite cylinder subjected to underwater blast loading , 1997 .

[9]  Shiyong Sun,et al.  Failure prediction on advanced grid stiffened composite cylinder under axial compression , 2011 .

[10]  L. Gannon.  Submerged aluminum cylinder response to close-proximity underwater explosions – a comparison of experiment and simulation , 2019, International Journal of Impact Engineering.

[11]  E. Ghavanloo,et al.  Transient response of a submerged cylindrical foam core sandwich panel subjected to shock loading , 2011 .

[12]  Jun Guo,et al.  A New Shock Factor of SWATH Catamaran Subjected to Underwater Explosion , 2017 .

[13]  Yuh-Shiou Tai,et al.  Deformation behavior of a stiffened panel subjected to underwater shock loading using the non-linear finite element method , 2010 .

[14]  J. Dalzel-Job,et al.  Conceptual design of a composite pressure hull , 2016 .

[15]  Xu Liang,et al.  A novel efficient method to evaluate the dynamic response of laminated plates subjected to underwater shock , 2013 .

[16]  Ding Gangyi,et al.  A finite element analysis of ship sections subjected to underwater explosion , 2011 .

[17]  Cho-Chung Liang,et al.  Optimum design of filament-wound multilayer-sandwich submersible pressure hulls , 2003 .

[18]  Mahmoud Helal,et al.  Optimal Design Analysis of Composite Submersible Pressure Hull , 2014 .

[19]  Cho-Chung Liang,et al.  Shock responses of a surface ship subjected to noncontact underwater explosions , 2006 .

[20]  Leonard D. Santiago,et al.  Surface ship shock modeling and simulation: two‐dimensional analysis , 1998 .

[21]  Ramana V. Grandhi,et al.  Multidisciplinary optimization of a lightweight torpedo structure subjected to an underwater explosion , 2006 .

[22]  C. Y. Jen,et al.  Coupled acoustic–structural response of optimized ring-stiffened hull for scaled down submerged vehicle subject to underwater explosion , 2009 .

[23]  P. Y. Hsu,et al.  Dynamic response of cylindrical shell structures subjected to underwater explosion , 2009 .

[24]  Yu Chen,et al.  The evaluation method of total damage to ship in underwater explosion , 2011 .

[25]  Y. S. Shin,et al.  Damage response of submerged imperfect cylindrical structures to underwater explosion , 1996 .

[26]  P. M. Mohite,et al.  Multi-objective multi-laminate design and optimization of a Carbon Fibre Composite wing torsion box using evolutionary algorithm , 2018 .

[27]  Hui Qi,et al.  Design optimization of lay-up and composite material system to achieve minimum buoyancy factor for composite elliptical submersible pressure hull , 2015 .

[28]  M. Helal,et al.  Numerical Simulation and Response of Stiffened Plates Subjected to Noncontact Underwater Explosion , 2014 .

[29]  S. W. Gong,et al.  Transient response of stiffened composite submersible hull to underwater explosion bubble , 2015 .

[30]  Pawan Kumar,et al.  On deformation and tearing of stiffened and un-stiffened square plates subjected to underwater explosion—a numerical study , 2010 .

[31]  Leandro Fleck Fadel Miguel,et al.  Advantages of employing a full characterization method over FORM in the reliability analysis of laminated composite plates , 2014 .

[32]  Stephen W. Tsai,et al.  A General Theory of Strength for Anisotropic Materials , 1971 .

[33]  Hao Wang,et al.  Experimental and numerical investigation of ship structure subjected to close-in underwater shock wave and following gas bubble pulse , 2014 .

[34]  A. C. Reddy.  Influence of Stiffeners on Strength of E-Glass/Epoxy Composite Submergible Hull Subjected to Shock Pressure Load using Finite Element Method , 2017 .

[35]  Y. Kwon,et al.  Underwater shock response of a cylinder subjected to a side-on explosion , 1993 .

[36]  J. Paik,et al.  An empirical formula for predicting the collapse strength of composite cylindrical-shell structures under external pressure loads , 2019, Ocean Engineering.

[37]  A. Zhang,et al.  Numerical investigation on global responses of surface ship subjected to underwater explosion in waves , 2018, Ocean Engineering.

[38]  P. D. Soden,et al.  A COMPARISON OF THE PREDICTIVE CAPABILITIES OF CURRENT FAILURE THEORIES FOR COMPOSITE LAMINATES , 1998 .

[39]  Ricardo Daniel Ambrosini,et al.  Experimental and computational analysis of plates under air blast loading , 2001 .

[40]  Yong Chen,et al.  Shock mitigation effects of cellular cladding on submersible hull subjected to deep underwater explosion , 2016 .

[41]  K. Narasimhan,et al.  Damage prediction of clamped circular plates subjected to contact underwater explosion , 2001 .

[42]  Y. S. Shin,et al.  Ship shock modeling and simulation for far-field underwater explosion , 2002 .

[43]  Leif Bjørnø,et al.  Underwater explosion research using small amounts of chemical explosives , 1976 .

[44]  M. Helal,et al.  Dynamic behavior of stiffened plates under underwater shock loading , 2015 .

[45]  Zhi Zong,et al.  Dynamic response of a surface ship structure subjected to an underwater explosion bubble , 2014 .

[46]  Yong Chen,et al.  Experimental investigation on the dynamic response of scaled ship model with rubber sandwich coatings subjected to underwater explosion , 2009 .

[47]  Mahmoud Helal,et al.  Design Optimization of Composite Elliptical Deep-Submersible Pressure Hull for Minimizing the Buoyancy Factor , 2014 .

[48]  M. Helal,et al.  Finite element modelling and multi-objective optimization of composite submarine pressure hull subjected to hydrostatic pressure , 2019, IOP Conference Series: Materials Science and Engineering.