Surface modification of magnesium and its alloys for biomedical applications.

Description based on online resource; title from PDF title page (ebrary, viewed January 22, 2015). ; Electronic reproduction. Palo Alto, Calif. : ebrary, 2015. Available via World Wide Web. Access may be limited to ebrary affiliated libraries. ; Electroni

[1]  T.S.N. Sankara Narayanan,et al.  Electrophoretic deposition of nanocomposite (HAp + TiO2) on titanium alloy for biomedical applications , 2012 .

[2]  F. Lawrence,et al.  Laser Shock Hardening of Welded Maraging Steel , 1990 .

[3]  S. Ban,et al.  Morphological regulation and crystal growth of hydrothermal-electrochemically deposited apatite. , 2002, Biomaterials.

[4]  Frank Witte,et al.  Progress and Challenge for Magnesium Alloys as Biomaterials , 2008 .

[5]  Yufeng Zheng,et al.  In vitro corrosion and biocompatibility study of phytic acid modified WE43 magnesium alloy , 2012 .

[6]  Y. Zheng,et al.  Corrosion resistance and cytotoxicity of a MgF2 coating on biomedical Mg–1Ca alloy via vacuum evaporation deposition method , 2013 .

[7]  A. Boccaccini,et al.  Electrophoretic deposition: From traditional ceramics to nanotechnology , 2008 .

[8]  Mingxing Zhang,et al.  Residual stresses in cold spray Al coatings: The effect of alloying and of process parameters , 2012 .

[9]  G. Tang,et al.  Corrosion resistance of ZrO_2–Zr-coated biodegradable surgical magnesium alloy , 2008 .

[10]  Aharon Gedanken,et al.  Antibiofilm activity of nanosized magnesium fluoride. , 2009, Biomaterials.

[11]  Shizhe Song,et al.  A Possible Biodegradable Magnesium Implant Material , 2007 .

[12]  G. El-Bassyouni,et al.  Fabrication, characterization and bioactivity evaluation of calcium pyrophosphate/polymeric biocomposites , 2009 .

[13]  D. Vashaee,et al.  Surface microstructure and in vitro analysis of nanostructured akermanite (Ca2MgSi2O7) coating on biodegradable magnesium alloy for biomedical applications. , 2014, Colloids and surfaces. B, Biointerfaces.

[14]  A. Fekry,et al.  Electrochemical impedance spectroscopy of chitosan coated magnesium alloys in a synthetic sweat medium , 2014 .

[15]  H. C. Man,et al.  Characterization and corrosion studies of fluoride conversion coating on degradable Mg implants , 2007 .

[16]  Guosong Wu,et al.  Improved corrosion resistance and cytocompatibility of magnesium alloy by two-stage cooling in thermal treatment , 2012 .

[17]  Changsong Dai,et al.  Fabrication of calcium phosphate/chitosan coatings on AZ91D magnesium alloy with a novel method , 2010 .

[18]  A. Ghasemi,et al.  Study of the structure and corrosion behavior of PEO coatings on AM50 magnesium alloy by electrochemical impedance spectroscopy , 2008 .

[19]  Y. Zheng,et al.  Surface modification of an Mg-1Ca alloy to slow down its biocorrosion by chitosan , 2009, Biomedical materials.

[20]  C. Alonso,et al.  Comparative study of fluoride conversion coatings formed on biodegradable powder metallurgy Mg: The effect of chlorides at physiological level , 2011 .

[21]  Yufeng Zheng,et al.  A study on alkaline heat treated Mg-Ca alloy for the control of the biocorrosion rate. , 2009, Acta biomaterialia.

[22]  Omer Van der Biest,et al.  ELECTROPHORETIC DEPOSITION OF MATERIALS , 1999 .

[23]  D. Vashaee,et al.  Surface modification of magnesium alloy implants by nanostructured bredigite coating , 2013 .

[24]  Hyoun‐Ee Kim,et al.  Hydroxyapatite coating on magnesium with MgF2 interlayer for enhanced corrosion resistance and biocompatibility , 2011, Journal of materials science. Materials in medicine.

[25]  F. Beckmann,et al.  In vivo corrosion and corrosion protection of magnesium alloy LAE442. , 2010, Acta biomaterialia.

[26]  Jinzhong Lu,et al.  Effects of laser shock processing on stress corrosion cracking susceptibility of AZ31B magnesium alloy , 2010 .

[27]  Junhua Hu,et al.  Fabrication and characterization of rod-like nano-hydroxyapatite on MAO coating supported on Mg–Zn–Ca alloy , 2011 .

[28]  N. Dahotre.  Lasers in surface engineering , 1998 .

[29]  M. Maitz,et al.  A surface-eroding poly(1,3-trimethylene carbonate) coating for fully biodegradable magnesium-based stent applications: toward better biofunction, biodegradation and biocompatibility. , 2013, Acta biomaterialia.

[30]  T. M. Yue,et al.  Excimer laser surface treatment of magnesium alloy WE43 for corrosion resistance improvement , 2005 .

[31]  Zhu Liu,et al.  Effect of excimer laser surface melting on the microstructure and corrosion performance of the die cast AZ91D magnesium alloy , 2010 .

[32]  Guosong Wu.  Fabrication of Al and Al/Ti coatings on magnesium alloy by sputtering , 2007 .

[33]  R. Drevet,et al.  Pulsed electrodeposition for the synthesis of strontium-substituted calcium phosphate coatings with improved dissolution properties. , 2013, Materials science & engineering. C, Materials for biological applications.

[34]  Lin Bo,et al.  Microstructure and corrosion resistance of AZ91D magnesium alloy treated by hybrid ion implantation and heat treatment , 2013 .

[35]  J. Park,et al.  Engineering biocompatible implant surfaces , 2013 .

[36]  Serena M. Best,et al.  Bioceramics: Past, present and for the future , 2008 .

[37]  M. Sealy,et al.  Surface integrity and process mechanics of laser shock peening of novel biodegradable magnesium-calcium (Mg-Ca) alloy. , 2010, Journal of the mechanical behavior of biomedical materials.

[38]  K. Mensah-Darkwa,et al.  Effect of Post Heat Treatment on Corrosion Resistance of Phytic Acid Conversion Coated Magnesium , 2013 .

[39]  Aldo R. Boccaccini,et al.  Application of electrophoretic and electrolytic deposition techniques in ceramics processing , 2002 .

[40]  Le Zhou,et al.  Enhanced corrosion protection of MgO coatings on magnesium alloy deposited by an anodic electrodeposition process , 2010 .

[41]  D. Macfarlane,et al.  A review of ionic liquid surface film formation on Mg and its alloys for improved corrosion performance , 2013 .

[42]  Jianzhong Zhou,et al.  Prediction on Residual Stress and Fatigue Life of Magnesium Alloy Treated by Laser Shot Peening , 2009 .

[43]  T. Laha,et al.  Effect of carrier gases on microstructural and electrochemical behavior of cold-sprayed 1100 aluminum coating , 2005 .

[44]  Shu Cai,et al.  Preparation and characterization of mesoporous 45S5 bioactive glass–ceramic coatings on magnesium alloy for corrosion protection , 2013 .

[45]  P. Sarkar,et al.  Electrophoretic Deposition (EPD): Mechanisms, Kinetics, and Application to Ceramics , 1996 .

[46]  M. Peuster,et al.  Development and biocompatibility of a novel corrodible fluoride-coated magnesium-calcium alloy with improved degradation kinetics and adequate mechanical properties for cardiovascular applications. , 2009, Journal of biomedical materials research. Part A.

[47]  Mark J. Schulz,et al.  Corrosion protection of biodegradable magnesium implants using anodization , 2011 .

[48]  K. Mensah-Darkwa,et al.  Enhanced corrosion resistance of phytic acid coated magnesium by stearic acid treatment , 2013 .

[49]  H. Weidong,et al.  Study on the corrosion resistance of phytic acid conversion coating for magnesium alloys , 2006 .

[50]  Michael P Sealy,et al.  Significant improvement of corrosion resistance of biodegradable metallic implants processed by laser shock peening , 2012 .

[51]  R Langer,et al.  Erosion kinetics of hydrolytically degradable polymers. , 1993, Proceedings of the National Academy of Sciences of the United States of America.

[52]  M. Qian,et al.  Microstructure and corrosion characteristics of laser-alloyed magnesium alloy AZ91D with Al–Si powder , 2008, Science and technology of advanced materials.

[53]  Limin Wu,et al.  Self-assembled monolayers on magnesium alloy surfaces from carboxylate ions , 2006 .

[54]  Ke Yang,et al.  Preliminary research on a novel bioactive silicon doped calcium phosphate coating on AZ31 magnesium alloy via electrodeposition. , 2014, Materials science & engineering. C, Materials for biological applications.

[55]  Yufeng Zheng,et al.  Surface characteristics and corrosion behaviour of WE43 magnesium alloy coated by SiC film , 2012 .

[56]  J. Mazumder,et al.  Laser cladding of zirconium on magnesium for improved corrosion properties , 1991, Journal of Materials Science.

[57]  M. Escudero,et al.  Biodegradation kinetics of modified magnesium-based materials in cell culture medium , 2011 .

[58]  R. Pinto,et al.  A two-step surface treatment, combining anodisation and silanisation, for improved corrosion protection of the Mg alloy WE54 , 2010 .

[59]  In-Seop Lee,et al.  Characterization and degradation comparison of DLC film on different magnesium alloys , 2010 .

[60]  W. Lu,et al.  In Vitro Corrosion and Cytocompatibility of ZK60 Magnesium Alloy Coated with Hydroxyapatite by a Simple Chemical Conversion Process for Orthopedic Applications , 2013, International journal of molecular sciences.

[61]  C. Grillo,et al.  Biological effects of magnesium particles degradation on UMR-106 cell line: influence of fluoride treatments. , 2011, Colloids and surfaces. B, Biointerfaces.

[62]  Ying Chen,et al.  Effect of fluoride coating on in vitro dynamic degradation of Mg–Zn alloy , 2011 .

[63]  Nan Huang,et al.  Covalent immobilization of phytic acid on Mg by alkaline pre-treatment: Corrosion and degradation behavior in phosphate buffered saline , 2013 .

[64]  Thomas Hassel,et al.  Biocompatibility of fluoride-coated magnesium-calcium alloys with optimized degradation kinetics in a subcutaneous mouse model. , 2013, Journal of biomedical materials research. Part A.

[65]  L. Niu,et al.  Influence of pH of Phosphating Bath on the Zinc Phosphate Coating on AZ91D Magnesium Alloy , 2006 .

[66]  M. Sakamoto,et al.  Liquid phase formation of alkyl- and perfluoro-phosphonic acid derived monolayers on magnesium alloy AZ31 and their chemical properties. , 2011, Journal of colloid and interface science.

[67]  Yong Wang,et al.  Evaluation of cyto-toxicity and corrosion behavior of alkali-heat-treated magnesium in simulated body fluid , 2004 .

[68]  Liping Xu,et al.  Characteristics and cytocompatibility of biodegradable polymer film on magnesium by spin coating. , 2012, Colloids and surfaces. B, Biointerfaces.

[69]  Ying Chen,et al.  Interaction between a high purity magnesium surface and PCL and PLA coatings during dynamic degradation , 2011, Biomedical materials.

[70]  Y. Guan,et al.  Darkening effect on AZ31B magnesium alloy surface induced by nanosecond pulse Nd:YAG laser , 2013 .

[71]  Frank Witte,et al.  The history of biodegradable magnesium implants: a review. , 2010, Acta biomaterialia.

[72]  H. Sugimura,et al.  Enhanced Anodic Dissolution of Magnesium in Quaternary-Ammonium-Based Ionic Liquid Containing a Small Amount of Water , 2013 .

[73]  Paul K. Chu,et al.  Recent developments and applications of plasma immersion ion implantation , 2004 .

[74]  P. P. Mueller,et al.  Fluoride and calcium-phosphate coated sponges of the magnesium alloy AX30 as bone grafts: a comparative study in rabbits , 2013, Journal of Materials Science: Materials in Medicine.

[75]  Shu Cai,et al.  Influence of heat treatment on crystallization and corrosion behavior of calcium phosphate glass coated AZ31 magnesium alloy by sol-gel method , 2013 .

[76]  M. Sakamoto,et al.  Corrosion resistant performances of alkanoic and phosphonic acids derived self-assembled monolayers on magnesium alloy AZ31 by vapor-phase method. , 2011, Langmuir : the ACS journal of surfaces and colloids.

[77]  S. Shrestha,et al.  Influence of post-treatment on the corrosion resistance of PEO coated AM50B and AM60B Mg alloys , 2010 .

[78]  H. Yamazoe,et al.  Reduced platelet adhesion and blood coagulation on cross-linked albumin films , 2010 .

[79]  A. Bandyopadhyay,et al.  Laser surface modification of metallic biomaterials , 2011 .

[80]  Keith D K Luk,et al.  A biodegradable polymer-based coating to control the performance of magnesium alloy orthopaedic implants. , 2010, Biomaterials.

[81]  L. Hench.  Sol-gel materials for bioceramic applications , 1997 .

[82]  Thomas Hassel,et al.  Influence of a magnesium-fluoride coating of magnesium-based implants (MgCa0.8) on degradation in a rabbit model. , 2010, Journal of biomedical materials research. Part A.

[83]  D. Macfarlane,et al.  Electrochemical reactivity of trihexyl(tetradecyl)phosphonium bis(2,4,4-trimethylpentyl)phosphinate ionic liquid on glassy carbon and AZ31 magnesium alloy , 2011 .

[84]  Qing-Guo Zhao,et al.  Growth and characterization of Mg(OH) 2 film on magnesium alloy AZ31 , 2011 .

[85]  Junhua Hu,et al.  Effect of electrodeposition modes on surface characteristics and corrosion properties of fluorine-doped hydroxyapatite coatings on Mg-Zn-Ca alloy , 2011 .

[86]  Morteza Farrokhi-Rad,et al.  Electrophoretic deposition of hydroxyapatite nanostructured coatings with controlled porosity , 2014 .

[87]  Y. Durandet,et al.  Electrochemical investigation of the influence of laser surface melting on the microstructure and corrosion behaviour of ZE41 magnesium alloy – An EIS based study , 2011 .

[88]  M. Metikoš-huković,et al.  Functionalization of biodegradable magnesium alloy implants with alkylphosphonate self-assembled films. , 2013, Materials science & engineering. C, Materials for biological applications.

[89]  G. Jin,et al.  Corrosion behaviors in physiological solution of cerium conversion coatings on AZ31 magnesium alloy , 2011 .

[90]  P. Schmuki,et al.  Functionalization of metallic magnesium with protein layers via linker molecules. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[91]  M. Schulz,et al.  Corrosion studies of modified organosilane coated magnesium–yttrium alloy in different environments , 2012 .

[92]  Ke Yang,et al.  Phosphating treatment and corrosion properties of Mg–Mn–Zn alloy for biomedical application , 2009, Journal of materials science. Materials in medicine.

[93]  J. Chu,et al.  Laser-shock processing effects on surface microstructure and mechanical properties of low carbon steel , 1999 .

[94]  M. Fathi,et al.  Controlling the degradation rate of AZ91 magnesium alloy via sol-gel derived nanostructured hydroxyapatite coating. , 2013, Materials science & engineering. C, Materials for biological applications.

[95]  A. R. Boccaccini,et al.  Electrophoretic deposition of carbon nanotube–ceramic nanocomposites , 2010 .

[96]  O. Ruano,et al.  Corrosion inhibition of powder metallurgy Mg by fluoride treatments. , 2010, Acta biomaterialia.

[97]  X. Cui,et al.  Electrochemical deposition of conducting polymer coatings on magnesium surfaces in ionic liquid. , 2011, Acta biomaterialia.

[98]  E. Aghion,et al.  Effect of diffusion coating of Nd on the corrosion resistance of biodegradable Mg implants in simulated physiological electrolyte. , 2013, Acta biomaterialia.

[99]  R. Surmenev.  A review of plasma-assisted methods for calcium phosphate-based coatings fabrication , 2012 .

[100]  Qing-Guo Zhao,et al.  Hydrothermal synthesis of protective coating on magnesium alloy using de-ionized water , 2012 .

[101]  N. Scharnagl,et al.  Controlled degradation of a magnesium alloy in simulated body fluid using hydrofluoric acid treatment followed by polyacrylonitrile coating , 2012 .

[102]  Chao Sun,et al.  Microstructure and corrosion performance of a cold sprayed aluminium coating on AZ91D magnesium alloy , 2010 .

[103]  Ke Yang,et al.  Formation by ion plating of Ti-coating on pure Mg for biomedical applications , 2005 .

[104]  A. Srinivasan,et al.  Electrochemical polymerization of pyrrole over AZ31 Mg alloy for biomedical applications , 2013 .

[105]  Chao-Sung Lin,et al.  Formation Mechanism and Properties of Titanate Conversion Coating on AZ31 Magnesium Alloy , 2012 .

[106]  D. K. Schwartz,et al.  Mechanisms and kinetics of self-assembled monolayer formation. , 2001, Annual review of physical chemistry.

[107]  Daniel Fabijanic,et al.  The use of Al–Al2O3 cold spray coatings to improve the surface properties of magnesium alloys , 2009 .

[108]  I. Zhitomirsky,et al.  Electrophoretic deposition of bioactive glass/polymer composite coatings with and without HA nanoparticle inclusions for biomedical applications , 2009 .

[109]  Barry O'Brien,et al.  The evolution of cardiovascular stent materials and surfaces in response to clinical drivers: a review. , 2009, Acta biomaterialia.

[110]  Fuzhai Cui,et al.  Plasma surface modification of magnesium alloy for biomedical application , 2010 .

[111]  J. Smolik,et al.  Corrosion-resistant composite titanium nitride layers produced on the AZ91D magnesium alloy by a hybrid method , 2014 .

[112]  D. Macfarlane,et al.  Characterization of the Magnesium Alloy AZ31 Surface in the Ionic Liquid Trihexyl(tetradecyl)phosphonium Bis(trifluoromethanesulfonyl)amide , 2010 .

[113]  Yuting Wang,et al.  In-situ hydrothermal crystallization Mg(OH)2 films on magnesium alloy AZ91 and their corrosion resistance properties , 2013 .

[114]  Changsong Dai,et al.  Study on the bonding strength between calcium phosphate/chitosan composite coatings and a Mg alloy substrate , 2012 .

[115]  Ben Fabry,et al.  Effect of surface pre-treatments on biocompatibility of magnesium. , 2009, Acta biomaterialia.

[116]  Yajing Yan,et al.  Corrosion behavior and biocompatibility of strontium and fluorine co-doped electrodeposited hydroxyapatite coatings , 2013 .

[117]  N. Birbilis,et al.  A simple route towards a hydroxyapatite–Mg(OH)2 conversion coating for magnesium , 2011 .

[118]  Chen Lu,et al.  Effect of heat treatment on the intermetallic layer of cold sprayed aluminum coatings on magnesium alloy , 2011 .

[119]  Hyoun‐Ee Kim,et al.  Use of a poly(ether imide) coating to improve corrosion resistance and biocompatibility of magnesium (Mg) implant for orthopedic applications. , 2013, Journal of biomedical materials research. Part A.

[120]  R. Narayan,et al.  Laser micro- and nanofabrication of biomaterials , 2011 .

[121]  Alexis M Pietak,et al.  Magnesium and its alloys as orthopedic biomaterials: a review. , 2006, Biomaterials.

[122]  D. Vashaee,et al.  Controlling the degradation rate of bioactive magnesium implants by electrophoretic deposition of akermanite coating , 2014 .

[123]  Shu Cai,et al.  45S5 bioactive glass–ceramic coated AZ31 magnesium alloy with improved corrosion resistance , 2013 .

[124]  Y. Guan,et al.  Effect of processing environment on laser-induced darkening evolution in magnesium alloy , 2014 .

[125]  P. Zhang,et al.  The effect of current mode and discharge type on the corrosion resistance of plasma electrolytic oxidation (PEO) coated magnesium alloy AJ62 , 2011 .

[126]  J. E. Lee,et al.  Polycaprolactone coating with varying thicknesses for controlled corrosion of magnesium , 2013, Journal of Coatings Technology and Research.

[127]  Yong Huang,et al.  Bioactivity and corrosion properties of gelatin-containing and strontium-doped calcium phosphate composite coating , 2013 .

[128]  Ling Qin,et al.  Surface modification of magnesium alloys developed for bioabsorbable orthopedic implants: a general review. , 2012, Journal of biomedical materials research. Part B, Applied biomaterials.

[129]  D. Macfarlane,et al.  Potentiostatic control of ionic liquid surface film formation on ZE41 magnesium alloy. , 2010, ACS Applied Materials and Interfaces.

[130]  M. Fathi,et al.  Electrophoretic deposition of nanostructured hydroxyapatite coating on AZ91 magnesium alloy implants with different surface treatments , 2013 .

[131]  Shu Cai,et al.  Bioactive glass–ceramic coating for enhancing the in vitro corrosion resistance of biodegradable Mg alloy , 2012 .

[132]  Fuzhai Cui,et al.  Surface Modifications of Magnesium Alloys for Biomedical Applications , 2011, Annals of Biomedical Engineering.

[133]  J. Bell,et al.  Development of a novel cathodic plasma/electrolytic deposition technique part 1: Production of titanium dioxide coatings , 2007 .

[134]  Jiamu Huang,et al.  Characterisation of TiAlN PVD coatings on AZ31 magnesium alloy , 2015, Research on Chemical Intermediates.

[135]  Alejandro Samaniego,et al.  The effect of NaHCO3 treatment time on the corrosion resistance of commercial magnesium alloys AZ31 and AZ61 in 0.6 M NaCl solution , 2013 .

[136]  S. Guan,et al.  In vitro degradation and mechanical integrity of Mg-Zn-Ca alloy coated with Ca-deficient hydroxyapatite by the pulse electrodeposition process. , 2010, Acta biomaterialia.

[137]  Wei Zhou,et al.  Solidification microstructure of AZ91D Mg alloy after laser surface melting , 2010 .

[138]  H. Hoche,et al.  Development of Decorative and Corrosion Resistant Coatings for the Surface Refinement of Magnesium Alloys by Plasma-based Methods , 2009 .

[139]  H. Weetall,et al.  Preparation of immobilized proteins covalently coupled through silane coupling agents to inorganic supports , 1993, Applied biochemistry and biotechnology.

[140]  R. Banerjee,et al.  Improved corrosion and wear resistance of Mg alloys via laser surface modification of Al on AZ31B , 2012 .

[141]  S. Moon,et al.  Zinc phosphate conversion coatings on magnesium alloys: A review , 2013, Metals and Materials International.

[142]  P. Chu,et al.  Improved surface corrosion resistance of WE43 magnesium alloy by dual titanium and oxygen ion implantation , 2013 .

[143]  N. Scharnagl,et al.  Surface modification of magnesium alloy AZ31 by hydrofluoric acid treatment and its effect on the corrosion behaviour , 2010 .

[144]  P. Chu,et al.  Surface design of biodegradable magnesium alloys — A review , 2013 .

[145]  M. Okido,et al.  Self-assembled monolayers formed on AZ31 Mg alloy , 2012 .

[146]  C. Daniel,et al.  Wetting behaviour of laser synthetic surface microtextures on Ti–6Al–4V for bioapplication , 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[147]  Yufeng Zheng,et al.  Plasma enhanced chemical vapor deposited silicon coatings on Mg alloy for biomedical application , 2013 .

[148]  M. Metikoš-huković,et al.  Surface Modification of Biodegradable Magnesium Alloys , 2012 .

[149]  G. Tang,et al.  Electrochemical Behavior Al2O3 ∕ Al Coated Surgical AZ91 Magnesium Alloy in Simulated Body Fluids , 2008 .

[150]  Control of Surface Degradation on Biodegradable Magnesium Alloys by Plasma-Based Technology , 2013, IEEE Transactions on Plasma Science.

[151]  Frank Witte,et al.  Degradable biomaterials based on magnesium corrosion , 2008 .

[152]  M. Tan,et al.  In vitro metal ion release and biocompatibility of amorphous Mg67Zn28Ca5 alloy with/without gelatin coating. , 2013, Materials science & engineering. C, Materials for biological applications.

[153]  H. Bakhsheshi‐Rad,et al.  Effect of fluoride treatment on corrosion behavior of Mg–Ca binary alloy for implant application , 2013 .

[154]  Laxmidhar Besra,et al.  A review on fundamentals and applications of electrophoretic deposition (EPD) , 2007 .

[155]  W. V. Ooij,et al.  Silane based chromate replacements for corrosion control, paint adhesion, and rubber bonding , 2000 .

[156]  Satendra Kumar,et al.  Electrodeposition of hydroxyapatite coating on magnesium for biomedical applications , 2012, Journal of Coatings Technology and Research.

[157]  Aleksey Yerokhin,et al.  Fatigue properties of Keronite® coatings on a magnesium alloy , 2004 .

[158]  S. Virtanen,et al.  Albumin coating on magnesium via linker molecules--comparing different coating mechanisms. , 2013, Colloids and surfaces. B, Biointerfaces.

[159]  S. Virtanen,et al.  Optimization of electrochemical polymerization parameters of polypyrrole on Mg–Al alloy (AZ91D) electrodes and corrosion performance , 2011 .

[160]  Mingxing Zhang,et al.  Heat treatment of cold spray coatings to form protective intermetallic layers , 2009 .

[161]  E. Han,et al.  Electrodeposition of hydroxyapatite coating on AZ91D magnesium alloy for biomaterial application , 2008 .

[162]  P. Chu,et al.  Surface modification of titanium, titanium alloys, and related materials for biomedical applications , 2004 .

[163]  J Dutta Majumdar,et al.  Laser material processing , 2011 .

[164]  K. Mensah-Darkwa,et al.  Corrosion Protective Conversion Coatings on Magnesium Disks Using a Hydrothermal Technique , 2014 .

[165]  P. Liu,et al.  Al2O3–ZrO2 ceramic coatings fabricated on WE43 magnesium alloy by cathodic plasma electrolytic deposition , 2012 .

[166]  B. Tay,et al.  Review of metal oxide films deposited by filtered cathodic vacuum arc technique , 2006 .

[167]  Abdullah C. W. Noorakma,et al.  Hydroxyapatite-Coated Magnesium-Based Biodegradable Alloy: Cold Spray Deposition and Simulated Body Fluid Studies , 2013, Journal of Materials Engineering and Performance.

[168]  S. Hiromoto,et al.  Control of degradation rate of bioabsorbable magnesium by anodization and steam treatment , 2010 .

[169]  Wei Zhou,et al.  Femtosecond laser-induced iridescent effect on AZ31B magnesium alloy surface , 2013 .

[170]  P. Chu,et al.  Self-protection against corrosion of aged magnesium alloy in simulated physiological environment , 2013 .

[171]  Ke Yang,et al.  Fluoride treatment and in vitro corrosion behavior of an AZ31B magnesium alloy , 2010 .

[172]  Yisheng Wang,et al.  In vivo degradation and bone response of a composite coating on Mg-Zn-Ca alloy prepared by microarc oxidation and electrochemical deposition. , 2012, Journal of biomedical materials research. Part B, Applied biomaterials.

[173]  Seyed Mohammad Ali Razavi,et al.  Coating of biodegradable magnesium alloy bone implants using nanostructured diopside (CaMgSi2O6) , 2014 .

[174]  N. Birbilis,et al.  The influence of ceramic particles on bond strength of cold spray composite coatings on AZ91 alloy substrate , 2010 .

[175]  Xiong Guo,et al.  Preparation and properties of composite MAO/ECD coatings on magnesium alloy. , 2013, Colloids and surfaces. B, Biointerfaces.

[176]  S. Moon,et al.  Effects of Zn2+ concentration and pH on the zinc phosphate conversion coatings on AZ31 magnesium alloy , 2013 .

[177]  Yufeng Zheng,et al.  In vivo stimulation of bone formation by aluminum and oxygen plasma surface-modified magnesium implants. , 2013, Biomaterials.

[178]  Yangmei Chen,et al.  Magnesium metal--a potential biomaterial with antibone cancer properties. , 2014, Journal of biomedical materials research. Part A.

[179]  C. You,et al.  The influence of HF treatment on corrosion resistance and in vitro biocompatibility of Mg-Zn-Zr alloy , 2010 .

[180]  Lifang Hu,et al.  Effect of Zn content on the chemical conversion treatments of AZ91D magnesium alloy , 2012 .

[181]  A R Boccaccini,et al.  Biomedical coatings on magnesium alloys - a review. , 2012, Acta biomaterialia.

[182]  N. Birbilis,et al.  High resolution microstructure characterization of the interface between cold sprayed Al coating and Mg alloy substrate , 2014 .

[183]  D. Macfarlane,et al.  New insights into the fundamental chemical nature of ionic liquid film formation on magnesium alloy surfaces. , 2009, ACS Applied Materials and Interfaces.

[184]  Wei Zhou,et al.  Effect of laser surface melting on corrosion behaviour of AZ91D Mg alloy in simulated-modified body fluid , 2009 .

[185]  H. Bakhsheshi‐Rad,et al.  Synthesis and in vitro degradation evaluation of the nano-HA/MgF2 and DCPD/MgF2 composite coating on biodegradable Mg–Ca–Zn alloy , 2013 .

[186]  Sannakaisa Virtanen,et al.  Biodegradable Mg and Mg alloys: Corrosion and biocompatibility , 2011 .

[187]  N. Rajendran,et al.  Evaluation of in vitro bioactivity and MG63 Oesteoblast cell response for TiO2 coated magnesium alloys , 2012, Journal of Sol-Gel Science and Technology.

[188]  Fu-hui Wang,et al.  Microstructure and corrosion resistance of phytic acid conversion coatings for magnesium alloy , 2008 .

[189]  H. Liu,et al.  Electrochemical deposition and evaluation of electrically conductive polymer coating on biodegradable magnesium implants for neural applications , 2013, Journal of Materials Science: Materials in Medicine.

[190]  H. Yamazoe,et al.  Drug-Carrying Albumin Film for Blood-Contacting Biomaterials , 2010, Journal of biomaterials science. Polymer edition.

[191]  Peter Skeldon,et al.  Corrosion behaviour of laser-melted magnesium alloys , 2005 .

[192]  G. Song,et al.  Anodizing Treatments for Magnesium Alloys and Their Effect on Corrosion Resistance in Various Environments , 2006 .

[193]  J. Chen,et al.  Surface modification of biomaterials by plasma immersion ion implantation , 2004 .

[194]  F. Lawrence,et al.  Laser shock‐induced mechanical and microstructural modification of welded maraging steel , 1990 .

[195]  Jiansong Zhou,et al.  Microstructure and corrosion behavior of plasma electrolytic oxidation coated magnesium alloy pre-treated by laser surface melting , 2012 .

[196]  M. Montemor,et al.  Anti-corrosion performance of a new silane coating for corrosion protection of AZ31 magnesium alloy in Hank's solution , 2012 .

[197]  A. Boccaccini,et al.  Electrochemical investigations of magnesium in DMEM with biodegradable polycaprolactone coating as corrosion barrier , 2013 .

[198]  J. Allen,et al.  A study of a biodegradable Mg-3Sc-3Y alloy and the effect of self-passivation on the in vitro degradation. , 2013, Acta biomaterialia.

[199]  R. A. Antunes,et al.  Corrosion Performance of Anodized AZ91D Magnesium Alloy: Effect of the Anodizing Potential on the Film Structure and Corrosion Behavior , 2014, Journal of Materials Engineering and Performance.

[200]  P. Kumta,et al.  Biodegradable poly(lactide-co-glycolide) coatings on magnesium alloys for orthopedic applications , 2012, Journal of Materials Science: Materials in Medicine.

[201]  Laser-assisted surface patterning of magnesium with silver nanoparticles: synthesis, characterization and modelling , 2011 .

[202]  A. Weisheit,et al.  Improving the Surface Properties of Magnesium by Laser Alloying , 1998 .

[203]  M. Qi,et al.  MAO-DCPD composite coating on Mg alloy for degradable implant applications , 2011 .

[204]  Y. Guan,et al.  Influence of overlapping tracks on microstructure evolution and corrosion behavior in laser-melt magnesium alloy , 2013 .

[205]  S. Liyanaarachchi,et al.  Polylactic acid coating on a biodegradable magnesium alloy: an in vitro degradation study by electrochemical impedance spectroscopy , 2012 .

[206]  Liguo Wang,et al.  In vivo degradation behavior of Ca-deficient hydroxyapatite coated Mg-Zn-Ca alloy for bone implant application. , 2011, Colloids and surfaces. B, Biointerfaces.

[207]  Yunchang Xin,et al.  Corrosion behavior of ZrN/Zr coated biomedical AZ91 magnesium alloy , 2009 .

[208]  Zhilian Yue,et al.  Biofunctionalized anti-corrosive silane coatings for magnesium alloys. , 2013, Acta biomaterialia.

[209]  W. Ho,et al.  Effects of Electrolytic MgO Coating Parameters on Corrosion Resistance of AZ91D Magnesium Alloy , 2011 .