Achieving ultra-high platinum utilization via optimization of PEM fuel cell cathode catalyst layer microstructure

Inefficient usage of expensive platinum catalyst has plagued the design of PEM fuel cells and contributed to the limited production and use of fuel cell systems. Here, it is shown that hierarchical optimization can increase platinum utilization 30-fold over existing catalyst layer designs while maintaining power densities over 0.35 W/cm2. The cathode catalyst layer microstructure is optimized with respect to platinum utilization (measured as kilowatts of electricity produced per gram of platinum). A one-dimensional agglomerate model that accounts for liquid water saturation is used in this study. The cathode catalyst layer microstructure is optimized by manipulating the platinum loading (m Pt), platinum-to-carbon ratio (Pt|C), and catalyst layer void fraction View the MathML source(eVcl). The resulting catalyst layer microstructure features ultra-low platinum loadings of roughly 0.01 mg/cm2.

[1]  P. Ekdunge,et al.  Modelling the PEM fuel cell cathode , 1997 .

[2]  K. Karan,et al.  An improved two-dimensional agglomerate cathode model to study the influence of catalyst layer structural parameters , 2005 .

[3]  K. Shinohara,et al.  The Analysis of Performance Loss with Low Platinum Loaded Cathode Catalyst Layers , 2010 .

[4]  Xianguo Li,et al.  Composition and performance modelling of catalyst layer in a proton exchange membrane fuel cell , 1999 .

[5]  Lorenz T. Biegler,et al.  Sensitivity of PEFC Models to Cathode Layer Microstructure , 2010 .

[6]  T. Nguyen,et al.  Modeling Liquid Water Effects in the Gas Diffusion and Catalyst Layers of the Cathode of a PEM Fuel Cell , 2004 .

[7]  T. Navessin,et al.  PEMFC catalyst layers: the role of micropores and mesopores on water sorption and fuel cell activity. , 2011, ACS applied materials & interfaces.

[8]  P. Sinha,et al.  The Impact of Platinum Loading on Oxygen Transport Resistance , 2012 .

[9]  Jon G. Pharoah,et al.  Nature-Inspired Energy- and Material-Efficient Design of a Polymer Electrolyte Membrane Fuel Cell , 2010 .

[10]  T. Nguyen,et al.  Modeling the Effects of Capillary Property of Porous Media on the Performance of the Cathode of a PEMFC , 2008 .

[11]  Michael Eikerling,et al.  Water Management in Cathode Catalyst Layers of PEM Fuel Cells A Structure-Based Model , 2006 .

[12]  Lorenz T. Biegler,et al.  Optimization of Polymer Electrolyte Fuel Cell Cathodes , 2008 .

[13]  Muhammad Sahimi,et al.  Statistical and continuum models of fluid-solid reactions in porous media , 1990 .

[14]  Kourosh Malek,et al.  On the micro-, meso-, and macroporous structures of polymer electrolyte membrane fuel cell catalyst layers. , 2010, ACS applied materials & interfaces.

[15]  S. Litster,et al.  PEM fuel cell electrodes , 2004 .

[16]  Kazuhiko Shinohara,et al.  Analysis of Reactant Gas Transport in Catalyst Layers; Effect of Pt-loadings , 2009 .

[17]  Marc Secanell Gallart,et al.  Computational modeling and optimization of proton exchange membrane fuel cells , 2007 .

[18]  Compilation of Henry’s law constants , 2015 .

[19]  T. Nguyen,et al.  Optimization of the Microstructure of the Cathode Catalyst Layer of a PEMFC for Two-Phase Flow , 2010 .

[20]  Chao-Yang Wang,et al.  Liquid Water Transport in Gas Diffusion Layer of Polymer Electrolyte Fuel Cells , 2004 .

[21]  Zhong‐sheng Liu,et al.  Effective transport coefficients in PEM fuel cell catalyst and gas diffusion layers: Beyond Bruggeman approximation , 2010 .

[22]  M. Abbasi,et al.  A Monte Carlo simulation of the diffusion of gases in porous solids , 1980 .

[23]  M. Verbrugge,et al.  Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte , 1991 .

[24]  Michael Eikerling,et al.  Self-Organization in Catalyst Layers of Polymer Electrolyte Fuel Cells , 2007 .

[25]  Afzal Suleman,et al.  Multi-variable optimization of PEMFC cathodes using an agglomerate model , 2007 .

[26]  Raghunathan Rengaswamy,et al.  A two-dimensional steady state model including the effect of liquid water for a PEM fuel cell cathode , 2007 .

[27]  P. Garcia-Ybarra,et al.  High platinum utilization in ultra-low Pt loaded PEM fuel cell cathodes prepared by electrospraying , 2010 .

[28]  Marc Secanell,et al.  Characterization of the PEM Fuel Cell Catalyst Layer Microstructure by Nonlinear Least-Squares Parameter Estimation , 2012 .

[29]  Charles R. Martin,et al.  Electrode kinetics of oxygen reduction at carbon-supported and unsupported platinum microcrystallite/Nafion® interfaces , 1992 .