Tool wear in titanium machining

The present work was performed at AB Sandvik Coromant as a part in improving the knowledge and understanding about wear of uncoated WC/Co cutting tools during turning of titanium alloy Ti-6Al-4V. W ...

[1]  P. Arrazola,et al.  Machinability of titanium alloys (Ti6Al4V and Ti555.3) , 2009 .

[2]  Thomas Childs,et al.  Metal Machining: Theory and Applications , 2000 .

[3]  J. Salguero,et al.  A SEM and EDS based Study of the Microstructural Modifications of Turning Inserts in the Dry Machining of Ti6Al4V Alloy , 2009 .

[4]  Oliver Huber,et al.  Focus Variation - A New Technology for High Resolution Optical 3D Surface Metrology in the Micro- and Nanometer Range , 2009 .

[5]  T. Kitagawa,et al.  Analytical prediction of cutting tool wear , 1984 .

[6]  Viktor P. Astakhov,et al.  Geometry of Single-point Turning Tools and Drills: Fundamentals and Practical Applications , 2010 .

[7]  João Paulo Davim,et al.  Tools (Geometry and Material) and Tool Wear , 2008 .

[8]  B. Turkovich,et al.  Tool wear in titanium machining , 1982 .

[9]  Taylan Altan,et al.  Estimation of tool wear in orthogonal cutting using the finite element analysis , 2004 .

[10]  Joseph A. Arsecularatne,et al.  Wear and tool life of tungsten carbide, PCBN and PCD cutting tools , 2006 .

[11]  P. Wright,et al.  Wear mechanisms that dominate tool-life in machining , 1981 .

[12]  Sounak Kumar Choudhury,et al.  Tool wear measurement in turning using force ratio , 2000 .

[13]  Song Wenlong,et al.  Diffusion wear in dry cutting of Ti–6Al–4V with WC/Co carbide tools , 2008 .

[14]  S. Yaldiz,et al.  Linear analysis of chatter vibration and stability for orthogonal cutting in turning , 2011 .

[15]  R. Danzl,et al.  Focus Variation – a Robust Technology for High Resolution Optical 3D Surface Metrology , 2011 .

[16]  Fabrizio Micari,et al.  Wear modelling in mild steel orthogonal cutting when using uncoated carbide tools , 2007 .

[17]  Song Zhang,et al.  Investigation on diffusion wear during high-speed machining Ti-6Al-4V alloy with straight tungsten carbide tools , 2009 .

[18]  João Roberto Ferreira,et al.  Optimization of titanium alloy (6Al–4V) machining , 2003 .

[19]  Z. M. Wang,et al.  Titanium alloys and their machinability—a review , 1997 .