Modelling residual stresses in friction stir welding of Al alloys—a review of possibilities and future trends

[1]  P. Colegrove,et al.  Rolling to control residual stress and distortion in friction stir welds , 2010 .

[2]  T. Gnäupel-Herold,et al.  Residual stress measurements in a thick, dissimilar aluminum alloy friction stir weld , 2006 .

[3]  M. Koçak,et al.  Residual stress in friction stir-welded Al sheets , 2004 .

[4]  Aiping Wu,et al.  Predicting residual distortion of aluminum alloy stiffened sheet after friction stir welding by numerical simulation , 2011 .

[5]  Cem Celal Tutum,et al.  The effect of hardening laws and thermal softening on modeling residual stresses in FSW of aluminum alloy 2024-T3 , 2013 .

[6]  Ø. Grong,et al.  Process modelling applied to 6082-T6 aluminium weldments—II. Applications of model , 1991 .

[7]  Livan Fratini,et al.  A continuum based fem model for friction stir welding—model development , 2006 .

[8]  M. R. Hill,et al.  A numerical simulation of the residual stresses in laser‐peened friction stir‐welded aluminum 2195 joints , 2011 .

[9]  A. Kokabi,et al.  Experimental and theoretical evaluations of thermal histories and residual stresses in dissimilar friction stir welding of AA5086-AA6061 , 2011, The International Journal of Advanced Manufacturing Technology.

[10]  T. W. Liao,et al.  Model based optimisation of friction stir welding processes , 2009 .

[11]  C. Callais.  Modelling the relationship between process parameters, microstructural evolutions and mechanical behaviour in a friction stir weld 6xxx aluminium alloy , 2004 .

[12]  M. N. James,et al.  Residual stresses and fatigue performance , 2007 .

[13]  Cem Celal Tutum,et al.  A multi-objective optimization application in Friction Stir Welding: Considering thermo-mechanical aspects , 2010, IEEE Congress on Evolutionary Computation.

[14]  Xin Sun,et al.  Finite element analysis of thermal tensioning techniques mitigating weld buckling distortion , 1996 .

[15]  Hongwu Zhang,et al.  Numerical Modeling of Friction Stir Welding Process by Using Rate-dependent Constitutive Model , 2009 .

[16]  P. Threadgill,et al.  Friction stir welding of aluminium alloys , 2009 .

[17]  H. Schmidt,et al.  A local model for the thermomechanical conditions in friction stir welding , 2004 .

[18]  Anders A. Larsen,et al.  Optimization of friction stir welding using space mapping and manifold mapping—an initial study of thermal aspects , 2009 .

[19]  J. Robson,et al.  Microstructural evolution during friction stir welding of AA7449 , 2004 .

[20]  Yuh J. Chao,et al.  Effects of temperature-dependent material properties on welding simulation , 2002 .

[21]  Phil E. Irving,et al.  The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024-T351 aluminium joints , 2003 .

[22]  C. Dalle Donne,et al.  Investigations on Residual Stresses in Friction Stir Welds , 2001 .

[23]  F. Roger,et al.  Steady state thermomechanical modelling of friction stir welding , 2006 .

[24]  Laurent Dubourg,et al.  Prediction and Measurements of Thermal Residual Stresses in AA2024-T3 Friction Stir Welds as a Function of Welding Parameters , 2010 .

[25]  Kalyanmoy Deb,et al.  Hybrid Search for Faster Production and Safer Process Conditions in Friction Stir Welding , 2010, SEAL.

[26]  Cem Celal Tutum,et al.  Thermomechanical Modelling of Friction Stir Welding , 2009 .

[27]  P. Michaleris,et al.  Themo-elasto-viscoplastic modelling of friction stir welding , 2009 .

[28]  M. Preuss,et al.  Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds , 2003 .

[29]  Zhili Feng,et al.  Modelling of residual stresses and property distributions in friction stir welds of aluminium alloy 6061-T6 , 2007 .

[30]  Hongjun Li,et al.  Multi-physics simulation of friction stir welding process , 2009 .

[31]  H. Schindler.  Determination of residual stress distributions from measured stress intensity factors , 1996 .

[32]  Xinhai Qi,et al.  Thermal and Thermo-Mechanical Modeling of Friction Stir Welding of Aluminum Alloy 6061-T6 , 1998 .

[33]  Wang Hong,et al.  Friction stir welding of aluminum alloys , 2004 .

[34]  H. Schmidt,et al.  Assessment of Benchmark Cases for Modeling of Residual Stresses and Distortions in Friction Stir Welding , 2008 .

[35]  Cem Celal Tutum,et al.  The effect of post-welding conditions in friction stir welds: From weld simulation to ductile failure , 2012 .

[36]  Jesper Henri Hattel,et al.  An analytical model for the heat generation in friction stir welding , 2004 .

[37]  Mohammad Riahi,et al.  Analysis of transient temperature and residual thermal stresses in friction stir welding of aluminum alloy 6061-T6 via numerical simulation , 2011 .

[38]  Jesper Henri Hattel,et al.  Thermal modelling of friction stir welding , 2008 .

[39]  Thomas J. Lienert,et al.  Toward reliable calculations of heat and plastic flow during friction stir welding of Ti-6Al-4V alloy , 2008 .

[40]  Anthony P. Reynolds,et al.  Structure, Properties, and Residual Stress of 304L Stainless Steel Friction Stir Welds , 2003 .

[41]  Daniel A. Tortorelli,et al.  Minimization of welding residual stress and distortion in large structures , 1999 .

[42]  P. J. Webster,et al.  Synchrotron X-ray residual strain scanning of a friction stir weld , 2001 .

[43]  Rajiv S. Mishra,et al.  Friction Stir Welding and Processing , 2007 .

[44]  K. An,et al.  In situ neutron diffraction measurements of temperature and stresses during friction stir welding of 6061-T6 aluminium alloy , 2007 .

[45]  Michael B. Prime,et al.  Residual Stress Measurement by Successive Extension of a Slot: The Crack Compliance Method , 1999 .

[46]  Y. Bréchet,et al.  Modeling the Relationship between Process Parameters - Microstructural Evolutions and Mechanical Behaviour in a Friction Stir Welded 6XXX Aluminium Alloy , 2004 .

[47]  Livan Fratini,et al.  Numerical procedure for residual stresses prediction in friction stir welding , 2011 .

[48]  D. C. Weckman,et al.  Predicting onset of high speed gas metal arc weld bead defects using dimensional analysis techniques , 2007 .

[49]  Yashar Javadi,et al.  Using ultrasonic waves and finite element method to evaluate through-thickness residual stresses distribution in the friction stir welding of aluminum plates , 2013, Materials & Design (1980-2015).

[50]  P. Michaleris,et al.  Comparison of buckling distortion propensity for SAW, GMAW, and FSW , 2006 .

[51]  Philip J. Withers,et al.  Global mechanical tensioning for the management of residual stresses in welds , 2008 .

[52]  Øystein Grong,et al.  A process model for friction stir welding of age hardening aluminum alloys , 2001 .

[53]  Predicting Residual Stresses in Friction Stir Welding of Aluminum Alloy 6061 Using an Integrated Multiphysics Model , 2013 .

[54]  Martin P. Bendsøe,et al.  Estimation of the Welding Speed and Heat Input in Friction Stir Welding using Thermal Models and Optimization , 2007 .

[55]  Mica Grujicic,et al.  Modeling of AA5083 Material-Microstructure Evolution During Butt Friction-Stir Welding , 2010 .

[56]  Omar Hatamleh,et al.  The Effects of Laser Peening and Shot Peening on Mechanical Properties in Friction Stir Welded 7075-T7351 Aluminum , 2008, Journal of Materials Engineering and Performance.

[57]  M. N. James,et al.  Synchrotron diffraction measurement of residual stresses in friction stir welded 5383-H321 aluminium butt joints and their modification by fatigue cycling , 2004 .

[58]  C. Dalle Donne,et al.  Effects of Weld Imperfections and Residual Stresses on the Fatigue Crack Propagation in Friction Stir Welded Joints , 2000 .

[59]  A. Murphy,et al.  The Characterization of Friction Stir Welding Process Effects on Stiffened Panel Buckling Performance , 2006 .

[60]  Aude Simar,et al.  A predictive thermo-fluid/thermo-mechanical modelling approach for computing temperature cycles and residual stresses in FSW , 2008 .

[61]  Philip J. Withers,et al.  The effect of tensioning and sectioning on residual stresses in aluminium AA7749 friction stir welds , 2008 .

[62]  Jesper Henri Hattel,et al.  Modelling heat flow around tool probe in friction stir welding , 2005 .

[63]  K. Dang Van,et al.  Modelling of the residual state of friction stir welded plates , 2008 .

[64]  Philip J. Withers,et al.  Simulation of the Effectiveness of Dynamic Cooling for Controlling Residual Stresses in Friction Stir Welds , 2008 .

[65]  Qingyu Shi,et al.  Residual stresses simulation for friction stir welded joint , 2007 .

[66]  Satish V. Kailas,et al.  Numerical analysis of friction stir welding process , 2006 .

[67]  C. Donne,et al.  Fatigue crack propagation assessment based on residual stresses obtained through cut-compliance technique , 2007 .

[68]  Ø. Grong,et al.  Process modelling applied to 6082-T6 aluminium weldments—I. Reaction kinetics , 1991 .

[69]  Yuh J. Chao,et al.  Numerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel , 2004 .

[70]  Cem Celal Tutum,et al.  Optimisation of process parameters in friction stir welding based on residual stress analysis: A feasibility study , 2010 .

[71]  Jed Lyons,et al.  Laser and shot peening effects on fatigue crack growth in friction stir welded 7075-T7351 aluminum alloy joints , 2007 .

[72]  R Kovacevic,et al.  Parametric finite element analysis of stress evolution during friction stir welding , 2006 .