Waveguides of a Composite Plate by using the Spectral Finite Element Approach

This work presents the extension of an existing procedure for evaluating the waveguides and the dispersion curves of a laminate made up of thin orthotropic composite plates arbitrarily oriented. The adopted approach is based on one-dimensional finite-element mesh throughout the thickness. Stiffness and mass matrices available in the literature for isotropic material are reported in full expanded form for the selected problem. The aim of the work is the development of a tool for the simulation of the most common composite materials. The knowledge of the wave characteristics in a plate allows correct sizing of the numerical mesh for the frequency-dependent analysis. The development of new stiffness matrices and the analysis for different heading angles are detailed to take into account the general anisotropic nature of the composite. The procedure concerns a standard polynomial eigenvalue problem in the wavenumber variable and is focused on the evaluation of the dispersion curves for all the propagating waves within the materials. A comparison with an analytical approach is also shown in the results using the classical laminate plate theory (CLPT). However, limits of CLPT are outlined and spectral finite element method can be successfully used to overcome such limitations.

[1]  Raymond M. Brach,et al.  Statistical Energy Analysis of Dynamical Systems: Theory and Applications , 1977 .

[2]  P. J. Shorter,et al.  Wave propagation and damping in linear viscoelastic laminates , 2004 .

[3]  Noureddine Atalla,et al.  The transmission loss of curved laminates and sandwich composite panels , 2005 .

[4]  A. H. Shah,et al.  Wave propagation in laminated composite plates , 1988 .

[5]  D. Roy Mahapatra,et al.  A spectral finite element model for analysis of axial–flexural–shear coupled wave propagation in laminated composite beams , 2003 .

[6]  Marek Krawczuk,et al.  Modelling of wave propagation in composite plates using the time domain spectral element method , 2007 .

[7]  S. Timoshenko,et al.  Theory of elasticity , 1975 .

[8]  A. Nayfeh The general problem of elastic wave propagation in multilayered anisotropic media , 1991 .

[9]  S. Finnveden,et al.  Modelling turbulence-induced vibration of pipes with a spectral finite element method , 2004 .

[10]  M. Brennan,et al.  Finite element prediction of wave motion in structural waveguides. , 2005, The Journal of the Acoustical Society of America.

[11]  P. Remington Structure-Borne Sound: Structural Vibrations and Sound Radiation at Audio Frequencies (3rd Edition) , 2005 .

[12]  Conor D. Johnson,et al.  Finite Element Prediction of Damping in Structures with Constrained Viscoelastic Layers , 1981 .

[13]  S. Finnveden Evaluation of modal density and group velocity by a finite element method , 2004 .

[14]  F. Yuan,et al.  Group velocity and characteristic wave curves of Lamb waves in composites: Modeling and experiments , 2007 .

[15]  Srinivasan Gopalakrishnan,et al.  A Spectral Finite Element Model for Wave Propagation Analysis in Laminated Composite Plate , 2006 .

[16]  D. Roy Mahapatra,et al.  A higher-order finite waveguide model for spectral analysis of composite structures , 2006 .

[17]  A. Baz Spectral finite-element modeling of the longitudinal wave propagation in rods treated with active constrained layer damping , 2000 .

[18]  W. Ostachowicz,et al.  Propagation of in-plane elastic waves in a composite panel , 2006 .

[19]  R. Cook,et al.  Concepts and Applications of Finite Element Analysis , 1974 .