The objective of this research is to compute the mechanical stresses in power transformer resulting from the currents more than rated value during its operation. Due to this high fault current, mechanical stresses are produced indifferent directions which may cause the damage of winding insulation. Various techniques have been adopted to analyze the stresses on transformer windings. For the accomplishment of research, FEM (Finite Element Method) is utilized for the calculation of short circuit forces. All mechanical generated in transformers are calculated mathematically and verified through software. For the verification of results, real time measurements on 20MVA 132 /11.5KV power transformer are made. Various failure mechanisms due to these forces have been discussed. Moreover, design parameters which determine the maximum stresses in different parts of the transformer are also the part of research. Effects of asymmetrical current and forces in various parts of transformer have also been narrated. Moreover, Different properties of materials have been studied and the usage of proper material for withstanding the dynamic effects of short circuits is discussed. Workmanship errors on short circuit withstand capability have also been elucidated. Finally, a complete model for the study of dynamic effects of short-circuits in a power transformer and comparison with forces calculated with FEMM soft ware (13).
[1]
Mukund R. Patel.
Dynamic Response of Power Transformers Under Axial Short Circuit Forces Part II - Windings and Clamps as a Combined System
,
1973
.
[2]
Hiroyuki Kojima,et al.
Buckling Strength Analysis of Large Power Transformer Windings Subjected to Electromagnetic Force Under Short Circuit
,
1980,
IEEE Transactions on Power Apparatus and Systems.
[3]
O. W. Andersen.
Transformer Leakage Flux Program Based on the Finite Element Method
,
1973
.
[4]
S. J. Salon,et al.
Comparison of assumptions in computation of short circuit forces in transformers
,
2000
.
[5]
S. A. Khaparde,et al.
Transformer Engineering: Design and Practice
,
2004
.
[6]
Mukund R. Patel.
Dynamic Response of Power Transformers Under Axial Short Circuit Forces Part I - Winding and Clamp as Individual Components
,
1973
.