Analysis of the microstructural evolution and interface diffusion behavior of NiCoCrAlYTa coating in high temperature oxidation

[1]  N. Yusof,et al.  Effects of Al2O3 diffusion barrier layer (including Y-containing small oxide precipitates) and nanostructured YSZ top coat on the oxidation behavior of HVOF NiCoCrAlTaY/APS YSZ coatings at 1100 °C , 2018, Corrosion Science.

[2]  Ying Chen,et al.  Effect of microstructure on early oxidation of MCrAlY coatings , 2018, Acta Materialia.

[3]  Tong Xu,et al.  Highly oxidation resistant and cost effective MCrAlY bond coats prepared by controlled atmosphere heat treatment , 2018, Surface and Coatings Technology.

[4]  L. Berthe,et al.  High temperature durability of a bond-coatless plasma-sprayed thermal barrier coating system with laser textured Ni-based single crystal substrate , 2018 .

[5]  B. Liu,et al.  Microstructural Evolution of NiCoCrAlHfYSi and NiCoCrAlTaY Coatings Deposited by AC-HVAF and APS , 2017, Journal of Thermal Spray Technology.

[6]  Guanjun Yang,et al.  Non-Parabolic Isothermal Oxidation Kinetics of Low Pressure Plasma Sprayed MCrAlY Bond Coat , 2017, International Thermal Spray Conference.

[7]  Liping Huang,et al.  Advanced analysis on growth mechanisms of thermally grown oxide at elevated temperature for thermal barrier coatings , 2016 .

[8]  Yingli Liu,et al.  Microstructural evolution at interfaces of thermal barrier coatings during isothermal oxidation , 2016 .

[9]  P. Li,et al.  A study of the diffusion and pre-oxidation treatment on the formation of Al2O3 ceramic scale on NiCrAlY bond-coat during initial oxidation process , 2016 .

[10]  K. Liu,et al.  Microstructural Evolution of SAPS/HVOF CoNiCrAlY Alloy Coating During Thermal Cycling Test , 2016, Oxidation of Metals.

[11]  Te-Hui Wang,et al.  Microstructural evolution and growth kinetics of thermally grown oxides in plasma sprayed thermal barrier coatings , 2016 .

[12]  Xiaobing Hu,et al.  Microstructural evolution of the interface between NiCrAlY coating and superalloy during isothermal oxidation , 2015 .

[13]  Hejun Li,et al.  Thermal shock resistance of thermal barrier coatings for nickel-based superalloy by supersonic plasma spraying , 2015 .

[14]  Xiao Huang,et al.  Isothermal Oxidation Behavior of VC and Columnar Structured Thermal Barrier Coatings Deposited by Suspension Plasma Spray Technology , 2015, Journal of Thermal Spray Technology.

[15]  C. Afonso,et al.  Microstructure and mechanical properties of NiCoCrAlYTa alloy processed by press and sintering route , 2015 .

[16]  S. Guo,et al.  The hot corrosion behavior of plasma sprayed zirconia coatings stabilized with yttria, ceria, and titania in sodium sulfate and vanadium oxide , 2015 .

[17]  Hui Peng,et al.  Interdiffusion behavior between NiAlHf coating and Ni-based single crystal superalloy with different crystal orientations , 2015 .

[18]  R. Peng,et al.  Some aspects of elemental behaviour in HVOF MCrAlY coatings in high-temperature oxidation , 2015 .

[19]  Xiao Huang,et al.  Effects of substrate material and TBC structure on the cyclic oxidation resistance of TBC systems , 2014 .

[20]  J. Majumdar,et al.  Kinetics and mechanism of isothermal oxidation of compositionally graded yttria stabilized zirconia (YSZ) based thermal barrier coating , 2014 .

[21]  R. Swadźba,et al.  Characterization of Alumina Scales Grown on a 2nd Generation Single Crystal Ni Superalloy During Isothermal Oxidation at 1050, 1100 and 1150 °C , 2014, Oxidation of Metals.

[22]  B. Viguier,et al.  Isothermal Oxidation Behaviour of NiCoCrAlYTa Coatings Produced by HVOF Spraying and Tribomet™ Process , 2014, Oxidation of Metals.

[23]  R. Eriksson,et al.  Modeling of microstructural evolution and lifetime prediction of MCrAlY coatings on nickel based superalloys during high temperature oxidation , 2013 .

[24]  Tie-jun Wang,et al.  Isothermal Oxidation Behavior of Supersonic Atmospheric Plasma-Sprayed Thermal Barrier Coating System , 2013, Journal of Thermal Spray Technology.

[25]  N. Yusof,et al.  Improvement of thermally grown oxide layer in thermal barrier coating systems with nano alumina as third layer , 2013 .

[26]  B. Szczygieł,et al.  High-temperature oxidation of FeCrAl alloy with alumina–silica–ceria coatings deposited by sol–gel method , 2013, Journal of Thermal Analysis and Calorimetry.

[27]  P. Poza,et al.  TEM analysis of the microstructure of thermal barrier coatings after isothermal oxidation , 2012 .

[28]  J. Absi,et al.  Finite Element Modeling of the Different Failure Mechanisms of a Plasma Sprayed Thermal Barrier Coatings System , 2012, Journal of Thermal Spray Technology.

[29]  Yedong He,et al.  High-temperature cyclic oxidation behavior of Al2O3–YAG composite coating prepared by EPD and microwave sintering , 2012 .

[30]  U. Bardi,et al.  Influence of Surface Finishing on the Oxidation Behaviour of VPS MCrAlY Coatings , 2012, Journal of Thermal Spray Technology.

[31]  Lai-fei Cheng,et al.  Comparison of oxidation resistance of NiCoCrAlTaY-coated and -uncoated Mar-M247 superalloys in the air at 1150 °C , 2012, Journal of Materials Science.

[32]  D. Sangalli,et al.  Exchange-correlation effects in the monoclinic to tetragonal phase stabilization of Yttrium-doped ZrO2: a first-principles approach , 2011, 1111.1147.

[33]  Chang-jiu Li,et al.  Isothermal Oxidation Behavior of NiCoCrAlTaY Coating Deposited by High Velocity Air-Fuel Spraying , 2011, Journal of Thermal Spray Technology.

[34]  Xiao Huang,et al.  Transient Oxide Formation on APS NiCrAlY After Oxidation Heat Treatment , 2011 .

[35]  Chang-jiu Li,et al.  Thermal fatigue behavior of thermal barrier coatings with the MCrAlY bond coats by cold spraying and low-pressure plasma spraying , 2010 .

[36]  B. Marple,et al.  A Preliminary Study of the Oxidation Behavior of TBC with Cold Spray CoNiCrAlY Bond Coat , 2010, International Thermal Spray Conference.

[37]  Kangmin Chen,et al.  Effects of CeO2 nanoparticles on microstructure and properties of laser cladded NiCoCrAlY coatings , 2010 .

[38]  T. Pollock,et al.  Microstructural evolution and failure characteristics of a NiCoCrAlY bond coat in “hot spot” cyclic oxidation , 2009 .

[39]  Hsin Wang,et al.  Investigation of reactions between vanadium oxide and plasma-sprayed yttria-stabilized zirconia coatings , 2009 .

[40]  R. Jayaganthan,et al.  Mechanical and microstructural characterisations of NiCrCoAlYTa coatings on superalloys deposited by detonation gun technique , 2009 .

[41]  Wei Gao,et al.  Developments in high-temperature corrosion and protection of materials , 2008 .

[42]  L. Singheiser,et al.  Temperature dependence of phase relationships in different types of MCrAlY-coatings , 2007 .

[43]  P. Ke,et al.  The preparation and hot corrosion resistance of gradient NiCoCrAlYSiB coatings , 2006 .

[44]  N. S. Cheruvu,et al.  Evaluation, degradation and life assessment of coatings for land based combustion turbines , 2006 .

[45]  W. Sloof,et al.  On the Microstructure of the Initial Oxide Grown by Controlled Annealing and Oxidation on a NiCoCrAlY Bond Coating , 2005 .

[46]  F. Pettit,et al.  Microstructural characterization of the failures of thermal barrier coatings on Ni-base superalloys , 2003 .

[47]  P. Xiao,et al.  Degradation of thermal barrier coatings due to thermal cycling up to 1150°C , 2002 .

[48]  Roger C. Reed,et al.  Oxidation of nickel-based single-crystal superalloys for industrial gas turbine applications , 2011 .

[49]  Zhao Baolu.  The Effects of Reactive Element Additions on the Oxidation Properties of MCrAlY Coating , 2007 .