Continuous fiber reinforced thermoplastic composite pultrusion with in situ polymerizable methyl methacrylate: A review

[1]  L. Laberge Lebel,et al.  A model of multi-die thermoplastic pultrusion , 2022, Composites Part B: Engineering.

[2]  P. Davies,et al.  Seawater aging of infused flax fibre reinforced acrylic composites , 2022, Composites Part C: Open Access.

[3]  Suwei Wang,et al.  Numerical Simulation of Impregnation Process of Reactive Injection Pultrusion for Glass Fiber/PA6 Composites , 2022, Polymers.

[4]  A. Toldy,et al.  The flame retardancy of polyamide 6—prepared by in situ polymerisation of ε-caprolactam—for T-RTM applications , 2021, Polymer Degradation and Stability.

[5]  Y. Imai,et al.  Computational prediction of microstructures in α‐alumina/ PMMA composites and its experimental verification , 2021, Polymer Composites.

[6]  C. Bois,et al.  Ply scale modelling of the quasi-static and fatigue behaviours of an acrylic-thermoplastic-matrix and glass-fibre-reinforced laminated composite covering the service temperature range of wind turbine blades , 2021 .

[7]  A. Comer,et al.  Influence of environmental conditioning on mechanical properties of carbon dry fibre preformed thermoplastic matrix composites manufactured via automated placement-resin infusion process , 2021 .

[8]  P. Ermanni,et al.  Pultrusion of large thermoplastic composite profiles up to Ø 40 mm from glass-fibre/PET commingled yarns , 2021, Composites Part B: Engineering.

[9]  W. Gruszka,et al.  Enhancing the solvent resistance and thermomechanical properties of thermoplastic acrylic polymers and composites via reactive hybridisation , 2021, Materials & Design.

[10]  K. Leong,et al.  Manufacturing and investigating the load, energy and failure attributes of thin ply carbon/Elium® thermoplastic hollow composites under low-velocity impact , 2021 .

[11]  L. L. Lebel,et al.  Effect of cooling temperature on deconsolidation and pulling forces in a thermoplastic pultrusion process , 2021 .

[12]  Margaret J Sobkowicz-Kline,et al.  An investigation of in situ impregnation for additive manufacturing of thermoplastic composites , 2021 .

[13]  B. Benmokrane,et al.  Physical, mechanical, and durability characteristics of newly developed thermoplastic GFRP bars for reinforcing concrete structures , 2021 .

[14]  D. Ray,et al.  Continuous fibre-reinforced thermoplastic acrylic-matrix composites prepared by liquid resin infusion – A review , 2021, Composites Part B: Engineering.

[15]  Robynne E. Murray,et al.  Structural validation of a thermoplastic composite wind turbine blade with comparison to a thermoset composite blade , 2021 .

[16]  I. Akhatov,et al.  Thermoplastic Pultrusion: A Review , 2021, Polymers.

[17]  K. Leong,et al.  Damping, impact and flexural performance of novel carbon/Elium® thermoplastic tubular composites , 2020 .

[18]  M. Skrifvars,et al.  Impregnation behaviour of regenerated cellulose fabric Elium® composite: Experiment, simulation and analytical solution , 2020, Journal of Materials Research and Technology.

[19]  R. Akkerman,et al.  Experimental and computational analysis of the polymerization overheating in thick glass/Elium® acrylic thermoplastic resin composites , 2020, Composites Part B: Engineering.

[20]  M. A. Kouchakzadeh,et al.  Stability analysis of generally laminated conical shells with variable thickness under axial compression , 2020 .

[21]  C. Bois,et al.  Effect of temperature on damage mechanisms and mechanical behaviour of an acrylic-thermoplastic-matrix and glass-fibre-reinforced composite , 2020, Journal of Composite Materials.

[22]  J. Hattel,et al.  Permeability and compaction behaviour of air-texturised glass fibre rovings: A characterisation study , 2020 .

[23]  V. Gavande,et al.  On the mechanical properties of continuous fiber reinforced thermoplastic composites realized through vacuum infusion , 2020 .

[24]  R. Barsotti,et al.  Fatigue response of ultrasonically welded carbon/Elium® thermoplastic composites , 2020 .

[25]  A. Zheng,et al.  The Trommsdorff effect under shear and bulk polymerization of methyl methacrylate via reactive extrusion , 2020 .

[26]  Pierre Escalé,et al.  Pultrusion of Bendable Continuous Fibers Reinforced Composites With Reactive Acrylic Thermoplastic ELIUM® Resin , 2019, Front. Mater..

[27]  A. Comer,et al.  Effect of environmental conditioning on the properties of thermosetting- and thermoplastic-matrix composite materials by resin infusion for marine applications , 2019, Composites Part B: Engineering.

[28]  D. Bortoluzzi,et al.  Analysis of fracture toughness in mode II and fractographic study of composites based on Elium® 150 thermoplastic matrix , 2019, Composites Part B: Engineering.

[29]  P. Ermanni,et al.  Experimental study on the influence of cyclic compaction on the fiber-bed permeability, quasi-static and dynamic compaction responses , 2019, Composites Part A: Applied Science and Manufacturing.

[30]  Jinglei Yang,et al.  Mechanical properties and failure modes of hybrid fiber reinforced polymer composites with a novel liquid thermoplastic resin, Elium® , 2019, Composites Part A: Applied Science and Manufacturing.

[31]  C. Froustey,et al.  Strain rate effect on the mechanical properties of a glass fibre reinforced acrylic matrix laminate. An experimental approach , 2019, Composite Structures.

[32]  Robynne E. Murray,et al.  Fusion joining of thermoplastic composite wind turbine blades: Lap-shear bond characterization , 2019, Renewable Energy.

[33]  G. Gomes,et al.  Effects of moisture absorption on mechanical and viscoelastic properties in liquid thermoplastic resin/carbon fiber composites , 2019, Polymer Engineering & Science.

[34]  Liu Yang,et al.  Mechanical and thermomechanical characterisation of vacuum-infused thermoplastic- and thermoset-based composites , 2019, Materials & Design.

[35]  Robynne E. Murray,et al.  Manufacturing and Flexural Characterization of Infusion-Reacted Thermoplastic Wind Turbine Blade Subcomponents , 2019, Applied Composite Materials.

[36]  S. Joshi,et al.  Flexural characteristics of novel carbon methylmethacrylate composites , 2019, Composites Communications.

[37]  D. Ray,et al.  Viscoelastic and drop-weight impact properties of an acrylic-matrix composite and a conventional thermoset composite – A comparative study , 2019, Materials Letters.

[38]  L. L. Lebel,et al.  Fiber damage and impregnation during multi‐die vacuum assisted pultrusion of carbon/PEEK hybrid yarns , 2019 .

[39]  Aaron P. Stebner,et al.  Recycling glass fiber thermoplastic composites from wind turbine blades , 2019, Journal of Cleaner Production.

[40]  Yan Zhao,et al.  Effect of preheat treatment on carbon fiber surface properties and fiber/PEEK interfacial behavior , 2018, Polymer Composites.

[41]  S. Joshi,et al.  Low-velocity impact response of carbon fibre composites with novel liquid Methylmethacrylate thermoplastic matrix , 2018, Composite Structures.

[42]  Olivia de Andrade Raponi,et al.  Study of the influence of initiator content in the polymerization reaction of a thermoplastic liquid resin for advanced composite manufacturing , 2018, Advances in Polymer Technology.

[43]  Olivia de Andrade Raponi,et al.  Thermal, rheological, and dielectric analyses of the polymerization reaction of a liquid thermoplastic resin for infusion manufacturing of composite materials , 2018, Polymer Testing.

[44]  C. Baley,et al.  Compressive and tensile behaviour of unidirectional composites reinforced by natural fibres: Influence of fibres (flax and jute), matrix and fibre volume fraction , 2018, Materials Today Communications.

[45]  P. Davies,et al.  Fatigue Behaviour of Acrylic Matrix Composites: Influence of Seawater , 2018, Applied Composite Materials.

[46]  S. Joshi,et al.  Mode I fracture toughness and fractographic investigation of carbon fibre composites with liquid Methylmethacrylate thermoplastic matrix , 2018 .

[47]  Tetsuya Yamamoto,et al.  Improved mechanical properties of PMMA composites: Dispersion, diffusion and surface adhesion of recycled carbon fiber fillers from CFRP with adsorbed particulate PMMA , 2017 .

[48]  M. Gall,et al.  Influence of Sea Water Aging on the Mechanical Behaviour of Acrylic Matrix Composites , 2017, Applied Composite Materials.

[49]  R. M. Boumbimba,et al.  Glass fibres reinforced acrylic thermoplastic resin-based tri-block copolymers composites: Low velocity impact response at various temperatures , 2017 .

[50]  A. E. Mahi,et al.  Mechanical behaviour and damage mechanisms analysis of a flax-fibre reinforced composite by acoustic emission , 2016 .

[51]  S. Joshi,et al.  Experimental investigation on suitability of carbon fibre thin plies for racquets , 2016 .

[52]  W. Zouari,et al.  Analysis of the mechanical behaviour of flax and glass fabrics-reinforced thermoplastic and thermoset resins , 2016 .

[53]  G. Ben,et al.  Fast fabrication method and evaluation of performance of hybrid FRTPs for applying them to automotive structural members , 2015 .

[54]  T. M. Young,et al.  Inclusion of a thermoplastic phase to improve impact and post-impact performances of carbon fibre reinforced thermosetting composites — A review , 2015 .

[55]  Christophe Binetruy,et al.  Modeling of Heat Transfer and Unsaturated Flow in Woven Fiber Reinforcements during Direct Injection-Pultrusion Process of Thermoplastic Composites , 2015 .

[56]  Enes Akca,et al.  A Review on the Matrix Toughness of Thermoplastic Materials , 2015 .

[57]  Oral Büyüköztürk,et al.  Ductility of FRP–concrete systems: Investigations at different length scales , 2013 .

[58]  C. Burtin,et al.  Thermoplastic pultrusion process: Modeling and optimal conditions for fibers impregnation , 2013 .

[59]  L. Lona,et al.  Bifunctional initiators on the polymerization of vinyl acetate , 2013 .

[60]  Hui Li,et al.  Water absorption and hygrothermal ageing of ultraviolet cured glass‐fiber reinforced acrylate composites , 2012 .

[61]  A. S. Luyt,et al.  The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of PMMA , 2012 .

[62]  Chin-Hsing Chen.  Mathematical modeling for the pultrusion of polymethyl methacrylate based composites , 2012 .

[63]  Jay R. Werber,et al.  Analysis of 2,2'-azobis (2-amidinopropane) dihydrochloride degradation and hydrolysis in aqueous solutions. , 2011, Journal of pharmaceutical sciences.

[64]  Constantinos Soutis,et al.  A study on the compressive strength of thick carbon fibre-epoxy laminates , 2007 .

[65]  Harald E.N. Bersee,et al.  Reactive processing of textile fiber-reinforced thermoplastic composites – An overview , 2007 .

[66]  I. Lacík,et al.  Critically evaluated rate coefficients for free-radical polymerization Part 6: Propagation rate coefficient of methacrylic acid in aqueous solution (IUPAC Technical Report) , 2007 .

[67]  Alexander Penlidis,et al.  Modelling of free radical polymerization of styrene and methyl methacrylate by a tetrafunctional initiator , 2006 .

[68]  H. Otsuka,et al.  Facile synthesis of multiblock copolymers composed of poly(tetramethylene oxide) and polystyrene using living free-radical polymerization macroinitiator , 2006 .

[69]  S. Wiedmer,et al.  An Experimental Study of the Pultrusion of Carbon Fiber-Polyamide 12 Yarn , 2006 .

[70]  Richey M. Davis,et al.  Pultruded Carbon Fiber/Vinyl Ester Composites Processed with Different Fiber Sizing Agents. Part III: Theoretical Aspects , 2005 .

[71]  J. Riffle,et al.  Pultruded Carbon Fiber/Vinyl Ester Composites Processed with Different Fiber Sizing Agents. Part II: Enviro-Mechanical Durability , 2005 .

[72]  D. Achilias,et al.  Kinetics of the Benzoyl Peroxide/Amine Initiated Free-Radical Polymerization of Dental Dimethacrylate Monomers: Experimental Studies and Mathematical Modeling for TEGDMA and Bis-EMA , 2004 .

[73]  K. Friedrich,et al.  Pultrusion of Thermoplastic Composites-Process Optimization and Mathematical Modeling , 1999 .

[74]  H. Hamada,et al.  Influence of the impregnating property on mechanical properties of commingled yarn composites , 1993 .

[75]  R. Pipes,et al.  A modeling approach to thermoplastic pultrusion. II: Verification of models , 1993 .

[76]  B. R. Gebart,et al.  Permeability of Unidirectional Reinforcements for RTM , 1992 .

[77]  Costas Kiparissides,et al.  Development of a General Mathematical Framework for Modeling Diffusion-Controlled Free-Radical Polymerization Reactions , 1992 .

[78]  C. Ma,et al.  Pultruded fiber‐reinforced poly(methyl methacrylate) composites. II. Static and dynamic mechanical properties, environmental effect, and postformability , 1992 .

[79]  C. Ma,et al.  Pultruded fiber reinforced thermoplastic poly(methyl methacrylate) composites. Part I. Correlation of processing parameters for optimizing the process , 1991 .

[80]  C. Ma,et al.  Pultruded fiber reinforced thermoplastic poly(methyl methacrylate) composites. Part II: Mechanical and thermal properties , 1991 .

[81]  C. Kiparissides,et al.  Modeling of diffusion‐controlled free‐radical polymerization reactions , 1988 .

[82]  David S. Soong,et al.  A computer model for the gel effect in free-radical polymerization , 1983 .

[83]  Archie E. Hamielec,et al.  High‐conversion diffusion‐controlled polymerization of styrene. I , 1982 .

[84]  R. Smith,et al.  Catalysed Polymerization of Methyl Methacrylate in the Liquid Phase , 1942, Nature.

[85]  H. Zhu,et al.  Effect of additives on the mechanical properties of bulk polymerized Acrylic using orthogonal test , 2021 .

[86]  I. Akhatov,et al.  Effect of Additives on Cure Kinetics of Pultrusion Resins , 2020 .

[87]  C. Barner‐Kowollik,et al.  (Meth)acrylic monomers with heteroatom-containing ester side chains: a systematic PLP-SEC and polymerization study , 2014 .

[88]  G. Reed,et al.  Diffusion-controlled termination during the initial stages of free radical polymerization of methyl methacrylate , 1961 .