Application of particle swarm optimization for maximum power point tracking of PV system with direct control method

This paper presents the application of particle swarm optimization (PSO) for maximum power point tracking (MPPT) of Photovoltaic (PV) system using the direct control method. The main contribution of the proposed scheme is the elimination of PI control loop which normally exists to manipulate the duty cycle. It is shown that the proposed MPPT controller has a similar structure to the conventional hill climbing method. However, the former exhibits superior dynamic and steady state response. It is also discovered that the controller performs satisfactorily during partial shading conditions of the PV array. It is able to track the global peak (GP) within ten sampling intervals. Simulation results indicate that proposed controller outperforms the hill climbing method for all type of environmental conditions.

[1]  Kashif Ishaque,et al.  Accurate MATLAB Simulink PV System Simulator Based on a Two-Diode Model , 2011 .

[2]  M. Vitelli,et al.  Optimization of perturb and observe maximum power point tracking method , 2005, IEEE Transactions on Power Electronics.

[3]  Kashif Ishaque,et al.  A critical evaluation of EA computational methods for Photovoltaic cell parameter extraction based on two diode model , 2011 .

[4]  G. Petrone,et al.  Predictive & Adaptive MPPT Perturb and Observe Method , 2007, IEEE Transactions on Aerospace and Electronic Systems.

[5]  Vivek Agarwal,et al.  Maximum Power Point Tracking Scheme for PV Systems Operating Under Partially Shaded Conditions , 2008, IEEE Transactions on Industrial Electronics.

[6]  Saad Mekhilef,et al.  Simulation and Hardware Implementation of Incremental Conductance MPPT With Direct Control Method Using Cuk Converter , 2011, IEEE Transactions on Industrial Electronics.

[7]  Mutlu Boztepe,et al.  Voltage based power compensation system for photovoltaic generation system under partially shaded insolation conditions , 2008 .

[8]  Kashif Ishaque,et al.  An improved modeling method to determine the model parameters of photovoltaic (PV) modules using differential evolution (DE) , 2011 .

[9]  Kashif Ishaque,et al.  Simple, fast and accurate two-diode model for photovoltaic modules , 2011 .

[10]  Saifur Rahman,et al.  Two-loop controller for maximizing performance of a grid-connected photovoltaic-fuel cell hybrid power plant , 1998 .

[11]  Syafaruddin,et al.  A comprehensive MATLAB Simulink PV system simulator with partial shading capability based on two-diode model , 2011 .

[12]  Tomonobu Senjyu,et al.  Neural-network-based maximum-power-point tracking of coupled-inductor interleaved-boost-converter-supplied PV system using fuzzy controller , 2003, IEEE Trans. Ind. Electron..

[13]  Ichiro Takano,et al.  A Study of a Two Stage Maximum Power Point Tracking Control of a Photovoltaic System under Partially Shaded Insolation Conditions , 2004 .

[14]  Syafaruddin,et al.  Modeling and simulation of photovoltaic (PV) system during partial shading based on a two-diode model , 2011, Simul. Model. Pract. Theory.

[15]  H. Otsuka,et al.  Control characteristics of a fibonacci-search-based maximum power point tracker when a photovoltaic array is partially shaded , 2004, The 4th International Power Electronics and Motion Control Conference, 2004. IPEMC 2004..

[16]  Kay Soon Low,et al.  A Global Maximum Power Point Tracking Scheme Employing DIRECT Search Algorithm for Photovoltaic Systems , 2010, IEEE Transactions on Industrial Electronics.