Performance enhancement of perovskite solar cells with Mg-doped TiO2 compact film as the hole-blocking layer

In this letter, we report perovskite solar cells with thin dense Mg-doped TiO2 as hole-blocking layers (HBLs), which outperform cells using TiO2 HBLs in several ways: higher open-circuit voltage (Voc) (1.08 V), power conversion efficiency (12.28%), short-circuit current, and fill factor. These properties improvements are attributed to the better properties of Mg-modulated TiO2 as compared to TiO2 such as better optical transmission properties, upshifted conduction band minimum (CBM) and downshifted valence band maximum (VBM), better hole-blocking effect, and higher electron life time. The higher-lying CBM due to the modulation with wider band gap MgO and the formation of magnesium oxide and magnesium hydroxides together resulted in an increment of Voc. In addition, the Mg-modulated TiO2 with lower VBM played a better role in the hole-blocking. The HBL with modulated band position provided better electron transport and hole blocking effects within the device.

[1]  L. Wan,et al.  Engineering self-assembled N-doped graphene-carbon nanotube composites towards efficient oxygen reduction electrocatalysts. , 2014, Physical chemistry chemical physics : PCCP.

[2]  Juan Bisquert,et al.  Determination of the electron lifetime in nanocrystalline dye solar cells by open-circuit voltage decay measurements. , 2003, Chemphyschem : a European journal of chemical physics and physical chemistry.

[3]  L. Etgar,et al.  Depletion region effect of highly efficient hole conductor free CH3NH3PbI3 perovskite solar cells. , 2014, Physical chemistry chemical physics : PCCP.

[4]  Shuming Yang,et al.  The enhanced photoelectric conversion efficiency of N3 sensitized MgTiO3 modified nanoporous TiO2 electrodes , 2009 .

[5]  Kenji Kakiage,et al.  Fabrication of a dye-sensitized solar cell containing a Mg-doped TiO2 electrode and a Br3(-)/Br- redox mediator with a high open-circuit photovoltage of 1.21 V. , 2013, Chemical communications.

[6]  Junliang Yang,et al.  Interface modification of polymer solar cells using graphene oxide and TiO2 NPs , 2015 .

[7]  H. Tao,et al.  Hierarchical porous nano-carbon composite: Effective fabrication and application in dye sensitized solar cells , 2013 .

[8]  Bert Conings,et al.  Perovskite‐Based Hybrid Solar Cells Exceeding 10% Efficiency with High Reproducibility Using a Thin Film Sandwich Approach , 2014, Advanced materials.

[9]  Nam-Gyu Park,et al.  Organometal Perovskite Light Absorbers Toward a 20% Efficiency Low-Cost Solid-State Mesoscopic Solar Cell , 2013 .

[10]  H. Tao,et al.  In-situ synthesis of TiO2 network nanoporous structure on Ti wire substrate and its application in fiber dye sensitized solar cells , 2014 .

[11]  Jing Zhang,et al.  Effect of Cerium Doping in the TiO2 Photoanode on the Electron Transport of Dye-Sensitized Solar Cells , 2012 .

[12]  Nripan Mathews,et al.  Flexible, low-temperature, solution processed ZnO-based perovskite solid state solar cells. , 2013, Chemical communications.

[13]  H. Snaith,et al.  Low-temperature processed meso-superstructured to thin-film perovskite solar cells , 2013 .

[14]  H. Tao,et al.  Perovskite solar cell with an efficient TiO₂ compact film. , 2014, ACS applied materials & interfaces.

[15]  Paul L. Burn,et al.  Electro-optics of perovskite solar cells , 2014, Nature Photonics.

[16]  Yanhong Luo,et al.  Hole-conductor-free perovskite organic lead iodide heterojunction thin-film solar cells: High efficiency and junction property , 2014 .

[17]  N. Park,et al.  Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9% , 2012, Scientific Reports.

[18]  J. Noh,et al.  Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors , 2013, Nature Photonics.

[19]  Yaoguang Rong,et al.  Full Printable Processed Mesoscopic CH3NH3PbI3/TiO2 Heterojunction Solar Cells with Carbon Counter Electrode , 2013, Scientific Reports.

[20]  Yang Yang,et al.  Interface engineering of highly efficient perovskite solar cells , 2014, Science.

[21]  Xingzhong Zhao,et al.  High Efficiency Dye-Sensitized Solar Cells based on a Bi-Layered Photoanode Made of TiO2 Nanocrystallites and Microspheres with High Thermal Stability , 2012 .

[22]  Z. Wen.  Effect of Li-doped TiO_2 Compact Layers for Dye Sensitized Solar Cells , 2011 .

[23]  M. Grätzel,et al.  Sequential deposition as a route to high-performance perovskite-sensitized solar cells , 2013, Nature.

[24]  Juan Bisquert,et al.  Determination of rate constants for charge transfer and the distribution of semiconductor and electrolyte electronic energy levels in dye-sensitized solar cells by open-circuit photovoltage decay method. , 2004, Journal of the American Chemical Society.

[25]  Timothy L. Kelly,et al.  Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques , 2013, Nature Photonics.

[26]  D. Goodman,et al.  Characterization of surface defects on MgO thin films by ultraviolet photoelectron and metastable impact electron spectroscopies , 2000 .

[27]  J. Teuscher,et al.  Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites , 2012, Science.

[28]  Masayoshi Kaneko,et al.  Fabrication of dye-sensitized solar cells with an open-circuit photovoltage of 1 V. , 2008, ChemSusChem.

[29]  Kun Zhang,et al.  Highly compact TiO2 layer for efficient hole-blocking in perovskite solar cells , 2014 .

[30]  Jin Young Kim,et al.  Nb-Doped TiO2: A New Compact Layer Material for TiO2 Dye-Sensitized Solar Cells , 2009 .

[31]  T. Sugiura,et al.  Mg-doped TiO2 nanorods improving open-circuit voltages of ammonium lead halide perovskite solar cells , 2014 .

[32]  Chang Ming Li,et al.  Interface Functionalization of Photoelectrodes with Graphene for High Performance Dye‐Sensitized Solar Cells , 2012 .

[33]  Juan Bisquert,et al.  Low-temperature processed electron collection layers of graphene/TiO2 nanocomposites in thin film perovskite solar cells. , 2013, Nano letters.