论文信息 - Zinc tin oxide transistors on flexible substrates

Zinc tin oxide transistors on flexible substrates

Abstract Flexible transistors were fabricated by sputter deposition of zinc tin oxide (ZTO) onto plasma-enhanced chemical vapor deposited gate dielectrics formed on flexible polyimide substrates with aluminum gate electrodes. Using output characteristics, the contact resistance of Al/ZTO contacts was found to be in the range of 100 kΩ causing significant on-current degradation. ZTO transistors with indium tin oxide (ITO) contacts exhibited high on-currents of 1.5 mA, on/off ratios of 106, subthreshold voltage slopes of 1.6 V/decade, threshold voltages of −8.8 V, and mobilities of 14 cm2 V−1 s−1. Capacitance measurements are shown to be useful for assessing contact resistance.

[1] T. Seong,et al. Pt/Indium tin oxide ohmic contacts to arsenic-doped p-type ZnO layers , 2005 .

[2] Benjamin J. Norris,et al. ZnO-based transparent thin-film transistors , 2003 .

[3] Randy Hoffman,et al. High-performance flexible zinc tin oxide field-effect transistors , 2005 .

[4] Pedro Barquinha,et al. Wide-bandgap high-mobility ZnO thin-film transistors produced at room temperature , 2004 .

[5] R. McLean,et al. Transparent ZnO thin-film transistor fabricated by rf magnetron sputtering , 2003 .

[6] Satoshi Masuda,et al. Transparent thin film transistors using ZnO as an active channel layer and their electrical properties , 2003 .

[7] Masashi Kawasaki,et al. High Mobility Thin Film Transistors with Transparent ZnO Channels , 2003 .