Pullout behaviour of hooked-end steel fibres in self-compacting concrete

13-05-04-FDR-00007, contract referenceADI/2007/V4.1/0049. This project involves the Companies PREGAIA and CIVITEST, andthe University of Minho. The authors wish to acknowledge the materials generously supplied byBekaert (flbers), SECIL (cement), Degussa (superplasticizer), and Comital (limestone flller).The flrst author wishes also to acknowledge the grant SFRH/BD/18002/2004, provided byFCT.

[1]  Lucie Vandewalle,et al.  Design of steel fibre reinforced concrete using the σ-w method: principles and applications , 2002 .

[2]  Victor C. Li,et al.  Modelling of fibre pull-out from a cement matrix , 1988 .

[3]  Victor C. Li,et al.  A micromechanical model of tension-softening and bridging toughening of short random fiber reinforced brittle matrix composites , 1991 .

[4]  Nemkumar Banthia,et al.  Concrete Reinforced with Deformed Steel Fibers, Part I: Bond-Slip Mechanisms , 1994 .

[5]  Antoine E. Naaman,et al.  Fiber Pullout and Bond Slip. I: Analytical Study , 1991 .

[6]  Nemkumar Banthia,et al.  Polymer and Steel Fiber-Reinforced Cementitious Composites under Impact Loading-Part 1: Bond-Slip Response , 2001 .

[7]  D. J. Hannant,et al.  Fibre cements and fibre concretes , 1978 .

[8]  Christopher K.Y. Leung,et al.  Effect of fiber inclination on crack bridging stress in brittle fiber reinforced brittle matrix composites , 1992 .

[9]  Steffen Grünewald,et al.  Performance-based design of self-compacting fibre reinforced concrete , 2004 .

[10]  P. Lawrence,et al.  Some theoretical considerations of fibre pull-out from an elastic matrix , 1972 .

[11]  H. Stang,et al.  Evaluation of crack width in FRC with conventional reinforcement , 1992 .

[12]  Surendra P. Shah,et al.  Pullout of Inclined Fibers from Cementitious Matrix , 1994 .

[13]  Pierre-Claude Aitcin,et al.  Pull-out behavior of corrugated steel fibers: Qualitative and statistical analysis , 1996 .

[14]  E. Kreyszig,et al.  Advanced Engineering Mathematics. , 1974 .

[15]  V. Li,et al.  Determination of interfacial debond mode for fiber-reinforced cementitious composites , 1994 .

[16]  Laura De Lorenzis,et al.  A modified pull-out test for bond of near-surface mounted FRP rods in concrete , 2002 .

[17]  S. L. Lee,et al.  Analytical Model for Tensile Behavior of Steel-Fiber Concrete , 1987 .

[18]  N. Banthia,et al.  Micromechanics of steel fiber pull-out: rate sensitivity at very low temperatures , 1992 .

[19]  P.J.M. Bartos,et al.  Inclined tensile strength of steel fibres in a cement-based composite , 1994 .

[20]  B. Harris,et al.  Fracture toughness of composites reinforced with discontinuous fibres , 1972 .

[21]  Surendra P. Shah,et al.  Pullout Problem: Stress versus Fracture Mechanical Approach , 1990 .

[22]  A. Naaman,et al.  Stress-Strain Properties of SIFCON in Compression , 1987 .

[23]  Simon A. Austin,et al.  Pull-out behaviour of hooked steel fibres , 2002 .

[24]  Antoine E. Naaman,et al.  EFFECT OF MORTAR FINENESS AND ADHESIVE AGENTS ON PULLOUT RESPONSE OF STEEL FIBERS , 2000 .

[25]  J. Morton,et al.  The cracking of composites consisting of discontinuous ductile fibres in a brittle matrix — effect of fibre orientation , 1974 .

[26]  P. Stroeven.  Stereology of concrete reinforced with short steel fibres , 1986 .

[27]  M. Maage,et al.  Interaction between steel fibers and cement based matrixes , 1977 .

[28]  Effect of lateral stresses on fiber debonding/pull-out , 1995 .

[29]  Antoine E. Naaman,et al.  Pullout Response of a Smooth Fiber with an End Anchorage , 2000 .

[30]  José Sena-Cruz,et al.  Strengthening of concrete structures with near-surface mounted CFRP laminate strips , 2005 .

[31]  C. Bakis,et al.  LOCAL BOND-SLIP RELATIONSHIP FOR FRP REINFORCEMENT IN CONCRETE , 2000 .

[32]  Eduardo Pereira,et al.  Self-compacting steel fibre reinforced concrete for precasted sandwich panels : experimental and numerical research , 2004 .

[33]  Antoine E. Naaman,et al.  Pull-Out Mechanism in Steel Fiber-Reinforced Concrete , 1976 .

[34]  Henrik Stang,et al.  Interface Property Characterization and Strengthening Mechanisms in Fiber Reinforced Cement Based Composites , 1997 .

[35]  Ann Van Gysel.  A pullout model for hooked end steel fibres , 1999 .

[36]  Reinforcement of brittle matrices by glass fibres , 1973 .

[37]  J. Barros,et al.  Compression behaviour of steel fibre reinforced self-compacting concrete : age influence and modeling , 2006 .

[38]  Antoine E. Naaman,et al.  Engineered Steel Fibers with Optimal Properties for Reinforcement of Cement Composites , 2003 .

[39]  Antoine E. Naaman,et al.  Bond-Slip Mechanisms of Steel Fibers in Concrete , 1991 .

[40]  G. W. Groves,et al.  The strength and fracture toughness of polycrystalline magnesium oxide containing metallic particles and fibres , 1972 .

[41]  Sidney Mindess,et al.  Fibre Reinforced Cementitious Composites , 1990 .

[42]  Gaetano Zingone,et al.  Analytical Solution for Bond‐Slip of Reinforcing Bars in R.C. Joints , 1990 .

[43]  Patrik Groth.  Fibre reinforced concrete : fracture mechanics methods applied on self-compacting concrete and energetically modified binders , 2000 .

[44]  Parviz Soroushian,et al.  FIBER-TYPE EFFECTS ON THE PERFORMANCE OF STEEL FIBER REINFORCED CONCRETE , 1991 .

[45]  Antoine E. Naaman,et al.  EFFECT OF STRAIN-RATE ON THE PULL-OUT BEHAVIOUR OF FIBRES IN MORTAR , 1981 .

[46]  Victor C. Li,et al.  Effect of inclining angle, bundling and surface treatment on synthetic fibre pull-out from a cement matrix , 1990 .

[47]  Victor C. Li,et al.  Postcrack Scaling Relations for Fiber Reinforced Cementitious Composites , 1992 .

[48]  Vitelmo V. Bertero,et al.  Local bond stress-slip relationships of deformed bars under generalized excitations , 1982 .

[49]  P. Bartos,et al.  Review paper: Bond in fibre reinforced cements and concretes , 1981 .

[50]  Antoine E. Naaman,et al.  Effect of mechanical clamping on the pull-out response of hooked steel fibers embedded in cementitious matrices , 2022 .

[51]  Nemkumar Banthia,et al.  Deformed steel fiber—cementitious matrix bond under impact , 1991 .

[52]  B. Banholzer,et al.  Analytical simulation of pull-out tests––the direct problem , 2005 .

[53]  Christopher K.Y. Leung,et al.  Micromechanical modeling of softening behavior in steel fiber reinforced cementitious composites , 1998 .

[54]  Antoine E. Naaman,et al.  Fracture Model for Fiber Reinforced Concrete , 1983 .

[55]  A. M. Brandt.  On the optimal direction of short metal fibres in brittle matrix composites , 1985 .

[56]  I. Marković,et al.  High-Performance Hybrid-Fibre Concrete: Development and Utilisation , 2006 .

[57]  P. Beaumont,et al.  Cracking and toughening of concrete and polymer-concrete dispersed with short steel wires , 1978 .

[58]  Mohamed Maalej,et al.  Effect of Fiber Rupture on Tensile Properties of Short Fiber Composites , 1995 .

[59]  S. Said,et al.  Study of the Interface Strength in Steel Fiber-Reinforced Cement-based Composites , 1986 .

[60]  G. Chanvillard.  ANALYSE EXPERIMENTALE ET MODELISATION MICROMECANIQUE DU COMPORTEMENT DES FIBRES D'ACIER TREFILEES, ANCREES DANS UNE MATRICE CIMENTAIRE , 1993 .