Modeling three‐dimensional crack propagation—A comparison of crack path tracking strategies

The development of a new finite element technique for the simulation of discontinuous failure phenomena in three dimensions is the key objective of this study. In contrast to the widely used extended finite element technique, we apply a purely deformation-based strategy based on an independent interpolation of the deformation field on both sides of the discontinuity. This method has been applied successfully for two-dimensional crack propagation problems in the past. However, when it comes to three-dimensional failure phenomena, it faces the same difficulties as the extended finite element method. Unlike in two dimensions, the characterization for the three-dimensional failure surface is non-unique and the tracking of the discrete crack can be performed in several conceptually different ways. In this work, we review the four most common three-dimensional crack tracking strategies. We perform a systematic comparison in terms of standard algorithmic quality measures such as mesh independency, efficiency, robustness, stability and computational cost. Moreover, we discuss more specific issues such as crack path continuity and integratability in commercial finite element packages. The features of the suggested crack tracking algorithms will be elaborated by means of characteristic benchmark problems in failure analysis. Copyright © 2008 John Wiley & Sons, Ltd.

[1]  L. J. Sluys,et al.  Discontinuous failure analysis for mode-I and mode-II localization problems , 1998 .

[2]  G. Hofstetter,et al.  Validation of 3D crack propagation in plain concrete -Part I: Experimental investigation - the PCT3D test , 2007 .

[3]  T. Christian Gasser,et al.  Validation of 3D crack propagation in plain concrete. Part II: Computational modeling and predictions of the PCT3D test , 2007 .

[4]  J. Oliver.  MODELLING STRONG DISCONTINUITIES IN SOLID MECHANICS VIA STRAIN SOFTENING CONSTITUTIVE EQUATIONS. PART 1: FUNDAMENTALS , 1996 .

[5]  Michael Ortiz,et al.  Three‐dimensional finite‐element simulation of the dynamic Brazilian tests on concrete cylinders , 2000 .

[6]  J. Oliver.  MODELLING STRONG DISCONTINUITIES IN SOLID MECHANICS VIA STRAIN SOFTENING CONSTITUTIVE EQUATIONS. PART 2: NUMERICAL SIMULATION , 1996 .

[7]  J. Mosler.  Modeling strong discontinuities at finite strains—A novel numerical implementation☆ , 2006 .

[8]  Paul Steinmann,et al.  On local tracking algorithms for the simulation of three-dimensional discontinuities , 2008 .

[9]  J. Oliver,et al.  On strategies for tracking strong discontinuities in computational failure mechanics , 2002 .

[10]  G. Hofstetter,et al.  An embedded strong discontinuity model for cracking of plain concrete , 2006 .

[11]  Günter Hofstetter,et al.  Three‐dimensional fracture simulations based on the SDA , 2007 .

[12]  Garth N. Wells,et al.  Cohesive‐zone models, higher‐order continuum theories and reliability methods for computational failure analysis , 2004 .

[13]  T. Belytschko,et al.  A three dimensional large deformation meshfree method for arbitrary evolving cracks , 2007 .

[14]  Ted Belytschko,et al.  A comment on the article ``A finite element method for simulation of strong and weak discontinuities in solid mechanics'' by A. Hansbo and P. Hansbo [Comput. Methods Appl. Mech. Engrg. 193 (2004) 3523-3540] , 2006 .

[15]  Ted Belytschko,et al.  Discontinuous enrichment in finite elements with a partition of unity method , 2000 .

[16]  A. Needleman,et al.  A cohesive segments method for the simulation of crack growth , 2003 .

[17]  Jörn Mosler,et al.  3D modelling of strong discontinuities in elastoplastic solids: fixed and rotating localization formulations , 2003 .

[18]  G. Meschke,et al.  Energy-based modeling of cohesive and cohesionless cracks via X-FEM , 2007 .

[19]  Milan Jirásek,et al.  Size effect on fracture energy induced by non‐locality , 2004 .

[20]  P. Steinmann,et al.  A finite element method for the computational modelling of cohesive cracks , 2005 .

[21]  R. Borst.  Numerical aspects of cohesive-zone models , 2003 .

[22]  A. Huespe,et al.  Continuum approach to the numerical simulation of material failure in concrete , 2004 .

[23]  Günther Meschke,et al.  Crack propagation criteria in the framework of X‐FEM‐based structural analyses , 2007 .

[24]  L. J. Sluys,et al.  A new method for modelling cohesive cracks using finite elements , 2001 .

[25]  F. Armero,et al.  An analysis of strong discontinuities in multiplicative finite strain plasticity and their relation with the numerical simulation of strain localization in solids , 1996 .

[26]  P. Hansbo,et al.  A FINITE ELEMENT METHOD ON COMPOSITE GRIDS BASED ON NITSCHE'S METHOD , 2003 .

[27]  E. Chaves.  Tracking 3D Crack Path , 2006 .

[28]  P. Hansbo,et al.  A finite element method for the simulation of strong and weak discontinuities in solid mechanics , 2004 .

[29]  Gerhard A. Holzapfel,et al.  Modeling 3D crack propagation in unreinforced concrete using PUFEM , 2005 .

[30]  T. Belytschko,et al.  Non‐planar 3D crack growth by the extended finite element and level sets—Part II: Level set update , 2002 .

[31]  Günter Hofstetter,et al.  Experimental verification of a constitutive model for concrete cracking , 2001 .

[32]  Michael Ortiz,et al.  An Efficient Adaptive Procedure for Three-Dimensional Fragmentation Simulations , 2001, Engineering with Computers.

[33]  T. Belytschko,et al.  Analysis of three‐dimensional crack initiation and propagation using the extended finite element method , 2005 .

[34]  R. de Borst,et al.  Simulating the propagation of displacement discontinuities in a regularized strain‐softening medium , 2002 .

[35]  Robert L. Taylor,et al.  Improved versions of assumed enhanced strain tri-linear elements for 3D finite deformation problems☆ , 1993 .

[36]  Paul Steinmann,et al.  A hybrid discontinuous Galerkin/interface method for the computational modelling of failure , 2004 .

[37]  E. Dvorkin,et al.  Finite elements with displacement interpolated embedded localization lines insensitive to mesh size and distortions , 1990 .

[38]  Miguel Cervera,et al.  Mesh objective tensile cracking via a local continuum damage model and a crack tracking technique , 2006 .

[39]  Julio Gálvez,et al.  Three‐dimensional simulation of concrete fracture using embedded crack elements without enforcing crack path continuity , 2007 .

[40]  T. Belytschko,et al.  Non‐planar 3D crack growth by the extended finite element and level sets—Part I: Mechanical model , 2002 .

[41]  Paul Steinmann,et al.  Towards the algorithmic treatment of 3D strong discontinuities , 2006 .

[42]  Ted Belytschko,et al.  Analysis of fracture in thin shells by overlapping paired elements , 2006 .

[43]  Ted Belytschko,et al.  Arbitrary discontinuities in finite elements , 2001 .

[44]  Gerhard A. Holzapfel,et al.  3D Crack propagation in unreinforced concrete. A two-step algorithm for tracking 3D crack paths , 2006 .

[45]  E. Kuhl,et al.  On the Application of Hansbo’s Method for Interface Problems , 2007 .

[46]  T. Belytschko,et al.  Extended finite element method for three-dimensional crack modelling , 2000 .