A New Coupler Concept for Contactless High-Speed Data Transmission Monitoring

This paper presents a new concept of a coupler that can be applied to high-speed data transmission contactless measurements. The proposed approach is dedicated for differential signal transmission monitoring in microstrip coupled lines on printed circuit boards (PCBs). The coupler, produced on a separate PCB, is overlayed on the transmission line with the differential signal and delivers decoupled differential signal to the main measurement path. The main advantage of this solution is that no dedicated connectors are required for the measurement process, which results in product cost reduction and design simplification. The complete design methodology of the proposed coupler has been described. Theoretical considerations have been confirmed by the example coupler prototype that was fabricated and measured. The measurement results show that the proposed concept may be advantageous for contactless signal monitoring in widely used high-speed interconnections realized on cheap FR-4 PCBs.

[1]  B. Geck,et al.  Contactless Scattering Parameter Measurements , 2011, IEEE Microwave and Wireless Components Letters.

[2]  Fisseha Mekuria.  Enabling wireless broadband technologies and services for the next billion users , 2011, IEEE Africon '11.

[3]  C.N. Berglund,et al.  An Empirical Study of Photomask Manufacturing Productivity , 2006, The 17th Annual SEMI/IEEE ASMC 2006 Conference.

[4]  B Nleya,et al.  Broadband / future generation network services deployment in rural and remote areas , 2009, 2009 2nd International Conference on Adaptive Science & Technology (ICAST).

[5]  Jahon Koo,et al.  MARC: Adaptive Rate Control scheme for improving the QoE of streaming services in mobile broadband networks , 2010, 2010 10th International Symposium on Communications and Information Technologies.

[6]  Haldun M. Özaktas,et al.  Optimal Measurement under Cost Constraints for Estimation of Propagating Wave Fields , 2007, 2007 IEEE International Symposium on Information Theory.

[7]  Vivek Agarwal,et al.  Design and Development of a Low-Cost Digital Magnetic Field Meter With Wide Dynamic Range for EMC Precompliance Measurements and Other Applications , 2009, IEEE Transactions on Instrumentation and Measurement.

[8]  I. Rolfes,et al.  Contactless network analysis system for the calibrated measurement of the scattering parameters of planar two-port devices , 2007, 2007 European Microwave Conference.

[9]  Zhenghe Feng,et al.  Development of low cost radiated emission measurement system , 2010, International Conference on Microwave and Millimeter Wave Technology.

[10]  Abhijit Chatterjee,et al.  Low cost AM/AM and AM/PM distortion measurement using distortion-to-amplitude transformations , 2009, 2009 International Test Conference.

[11]  Theodore Grosch,et al.  Comparing coverage quality for femtocell and macrocell broadband data services , 2010, IEEE Communications Magazine.

[12]  D.E. Verbitsky,et al.  Early Reliability and Failure Analysis of Cordless Personal Communication Systems , 2007, 2007 Annual Reliability and Maintainability Symposium.

[13]  Anastasios A. Economides,et al.  Broadband services price competition modeling , 2011, CTTE.

[14]  Selahattin Sayil,et al.  Comparison of contactless measurement and testing techniques to a all-silicon optical test and characterization method , 2005, IEEE Transactions on Instrumentation and Measurement.

[15]  Cheng-Chun Chang,et al.  LED spectrum measurement via low cost spectrum sensor on-a-chip , 2010, SPIE/OSA/IEEE Asia Communications and Photonics.

[16]  Rakesh Chadha,et al.  Computer Aided Design of Microwave Circuits , 1978 .

[17]  Marek Zmuda.  60 A New Approach For High Speed Data Transmission Monitoring , 2009 .

[18]  Puneet Gupta,et al.  Design dependent process monitoring for back-end manufacturing cost reduction , 2010, 2010 IEEE/ACM International Conference on Computer-Aided Design (ICCAD).

[19]  Abhijit Chatterjee,et al.  Phase Distortion to Amplitude Conversion-Based Low-Cost Measurement of AM-AM and AM-PM Effects in RF Power Amplifiers , 2012, IEEE Transactions on Very Large Scale Integration (VLSI) Systems.

[20]  Chien-Chou Chen,et al.  Spectrum measurement via low cost Spectrum Sensor on-a-chip , 2010, Asia Communications and Photonics Conference and Exhibition.

[21]  Abdullah Eroglu,et al.  The Complete Design of Microstrip Directional Couplers Using the Synthesis Technique , 2008, IEEE Transactions on Instrumentation and Measurement.

[22]  Raimund Schatz,et al.  Poor, Good Enough or Even Better? Bridging the Gap between Acceptability and QoE of Mobile Broadband Data Services , 2011, 2011 IEEE International Conference on Communications (ICC).

[23]  Jian Yang,et al.  New hat feed for reflector antennas realised without dielectrics for reducing manufacturing cost and improving reflection coefficient , 2011 .

[24]  R.A. Andrews,et al.  Managing component variability with a firmware calibration model; reduced manufacturing costs and freedom in vendor selection , 2005, Canadian Conference on Electrical and Computer Engineering, 2005..

[25]  Yves Rolain,et al.  Broadband high frequency differential coupler , 2001, IMTC 2001. Proceedings of the 18th IEEE Instrumentation and Measurement Technology Conference. Rediscovering Measurement in the Age of Informatics (Cat. No.01CH 37188).