Symmetric 3D passive components for RF ICs application

This paper proposes novel 3-D symmetric RF passive components, including inductors, transformers, and baluns. Layout areas of these components are drastically reduced by means of stacked structure while the symmetry of input and output ports is also maintained. The area saving of a 3-D inductor is up 70%. The 1:1 transformer shows less than 0.1 % inductance mismatch in a 18 GHz range, and K is up to 0.87 at 17 GHz. The 3-D balun manifests less than 0.8 dB gain mismatch from 5.25 GHz to 6 GHz and phase error is about 4/spl deg/ at 5.25 GHz according to measurement results. All the components are fabricated in a 0.18 /spl mu/m standard CMOS process.

[1]  J.R. Long,et al.  Monolithic transformers for silicon RF IC design , 2000, IEEE Journal of Solid-State Circuits.

[2]  Shen-Iuan Liu,et al.  Miniature 3-D inductors in standard CMOS process , 2002, IEEE J. Solid State Circuits.

[3]  K. Jenkins,et al.  Microwave inductors and capacitors in standard multilevel interconnect silicon technology , 1996 .

[4]  Behzad Razavi,et al.  Stacked inductors and transformers in CMOS technology , 2001 .

[5]  Tao Liang,et al.  Design and modeling of compact on-chip transformer/balun using multi-level metal windings for RF integrated circuits , 2001, 2001 IEEE Radio Frequency Integrated Circuits (RFIC) Symposium (IEEE Cat. No.01CH37173).

[6]  J. Long,et al.  A Q-factor enhancement technique for MMIC inductors , 1998, 1998 IEEE MTT-S International Microwave Symposium Digest (Cat. No.98CH36192).

[7]  John R. Long,et al.  Differentially driven symmetric microstrip inductors , 2002 .

[8]  C. Yue,et al.  On-chip Spiral Inductors With Patterned Ground Shields For Si-based RF IC's , 1997, Symposium 1997 on VLSI Circuits.