Analytical prediction of chatter stability in turning of low-stiffness pure iron parts by nosed tool

[1]  Ming Luo,et al.  A wireless instrumented milling cutter system with embedded PVDF sensors , 2018, Mechanical Systems and Signal Processing.

[2]  Dinghua Zhang,et al.  Improving tool life in multi-axis milling of Ni-based superalloy with ball-end cutter based on the active cutting edge shift strategy , 2018 .

[3]  Yuwen Sun,et al.  A second-order semi-discretization method for the efficient and accurate stability prediction of milling process , 2017 .

[4]  Tony L. Schmitz,et al.  A coupled dynamics, multiple degree of freedom process damping model, Part 1: Turning , 2016 .

[5]  N. He,et al.  Investigation on notch wear mechanism in finish turning pure iron material with uncoated carbide tools under different cooling/lubrication conditions , 2016 .

[6]  Kadir Gok,et al.  Development of three-dimensional finite element model to calculate the turning processing parameters in turning operations , 2015 .

[7]  F. Fiorillo,et al.  Microstructure and magnetic properties of pure iron for cyclotron electromagnets , 2014 .

[8]  M. Yallese,et al.  Experimental investigation of cutting parameters influence on surface roughness and cutting forces in hard turning of X38CrMoV5-1 with CBN tool , 2013 .

[9]  S. Behbahani,et al.  Analysis of ultrasonic assisted machining (UAM) on regenerative chatter in turning , 2013 .

[10]  S. Yaldiz,et al.  Linear analysis of chatter vibration and stability for orthogonal cutting in turning , 2011 .

[11]  Juan Carlos Jáuregui-Correa,et al.  Analysis of compliance between the cutting tool and the workpiece on the stability of a turning process , 2008 .

[12]  Vishal S. Sharma,et al.  Estimation of cutting forces and surface roughness for hard turning using neural networks , 2008, J. Intell. Manuf..

[13]  Erhan Budak,et al.  Analytical Modeling of Chatter Stability in Turning and Boring Operations—Part I: Model Development , 2007 .

[14]  G. Stépán,et al.  State-dependent delay in regenerative turning processes , 2006 .

[15]  Yusuf Altintas,et al.  Multi frequency solution of chatter stability for low immersion milling , 2004 .

[16]  Gábor Stépán,et al.  Semi‐discretization method for delayed systems , 2002 .

[17]  Dimitrios E. Manolakos,et al.  Modelling of precision hard cutting using implicit finite element methods , 2002 .

[18]  Yusuf Altintas,et al.  MODELING APPROACHES AND SOFTWARE FOR PREDICTING THE PERFORMANCE OF MILLING OPERATIONS AT MAL-UBC , 2000 .

[19]  S. A. Tobias,et al.  A Theory of Nonlinear Regenerative Chatter , 1974 .

[20]  H. E. Merritt.  Theory of Self-Excited Machine-Tool Chatter: Contribution to Machine-Tool Chatter Research—1 , 1965 .

[21]  Yusuf Altintas,et al.  Analytical Prediction of Stability Lobes in Milling , 1995 .

[22]  M. J. D. Powell,et al.  An efficient method for finding the minimum of a function of several variables without calculating derivatives , 1964, Comput. J..