Failure analysis of electrolyte-supported solid oxide fuel cells

Abstract For solid oxide fuel cells (SOFCs) one key aspect is the structural integrity of the cell and hence its thermo mechanical long term behaviour. The present study investigates the failure mechanisms and the actual causes for fracture of electrolyte supported SOFCs which were run using the current μ-CHP system of Hexis AG, Winterthur – Switzerland under lab conditions or at customer sites for up to 40,000 h. In a first step several operated stacks were demounted for post-mortem inspection, followed by a fractographic evaluation of the failed cells. The respective findings are then set into a larger picture including an analysis of the present stresses acting on the cell like thermal and residual stresses and the measurements regarding the temperature dependent electrolyte strength. For all investigated stacks, the mechanical failure of individual cells can be attributed to locally acting bending loads, which rise due to an inhomogeneous and uneven contact between the metallic interconnect and the cell.

[1]  A. Selçuk,et al.  The influence of electrodes on the strength of planar zirconia solid oxide fuel cells , 2001 .

[2]  A. Nakajo,et al.  Compilation of mechanical properties for the structural analysis of solid oxide fuel cell stacks. Constitutive materials of anode-supported cells , 2012 .

[3]  A. Hagen,et al.  LSM–YSZ Reactions in Different Atmospheres , 2009 .

[4]  J. Malzbender,et al.  Fracture test of thin sheet electrolytes for solid oxide fuel cells , 2007 .

[5]  Thomas Hocker,et al.  Efficient simulation of fuel cell stacks with the volume averaging method , 2003 .

[6]  Boris Iwanschitz,et al.  Fundamental mechanisms limiting solid oxide fuel cell durability , 2008 .

[7]  Norbert H. Menzler,et al.  Durability of Ni anodes during reoxidation cycles , 2010 .

[8]  Tohru Yamamoto,et al.  Thermal Expansion of Nickel‐Zirconia Anodes in Solid Oxide Fuel Cells during Fabrication and Operation , 1998 .

[9]  Douglas G. Ivey,et al.  A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects , 2010 .

[10]  Z. Wuillemin,et al.  TEM investigation on zirconate formation and chromium poisoning in LSM/YSZ cathode , 2011, Journal of Materials Science.

[11]  Z. Suo,et al.  Thin film cracking and the roles of substrate and interface , 1992 .

[12]  David R. Clarke,et al.  The Tetragonal-Monoclinic Transformation in Zirconia: Lessons Learned and Future Trends , 2009 .

[13]  A. Selçuk,et al.  Residual stress and fracture of laminated ceramic membranes , 1999 .

[14]  C. Hsueh.  Thermal Stresses in Elastic Multilayer Systems , 2002 .

[15]  J. Kuebler,et al.  Simulation and Validation of Thermo‐mechanical Stresses in Planar SOFCs , 2010 .

[16]  A. Janne Carlsson,et al.  Weight Functions and Stress Intensity Factor Solutions , 1991 .

[17]  Christopher S. Johnson,et al.  Sulfur-tolerant anode materials for solid oxide fuel cell application , 2007 .

[18]  Robert Danzer,et al.  Fracture of Ceramics , 2008 .

[19]  G. Schneider,et al.  Calculation of the stress intensity factor of an edge crack in a finite elastic disc using the weight function method , 1989 .

[20]  Gérard Delette,et al.  A numerical tool to estimate SOFC mechanical degradation: Case of the planar cell configuration , 2008 .

[21]  Boris Iwanschitz,et al.  Microstructure degradation of cermet anodes for solid oxide fuel cells: Quantification of nickel grain growth in dry and in humid atmospheres , 2011 .

[22]  Z. Suo,et al.  Mixed mode cracking in layered materials , 1991 .

[23]  Boris Iwanschitz,et al.  Quantitative relationships between composition, particle size, triple phase boundary length and surface area in nickel-cermet anodes for Solid Oxide Fuel Cells , 2011 .

[24]  S. Primdahl,et al.  Relationship between strength and failure mode of ceramic multilayers , 1998 .

[25]  Jürgen Malzbender,et al.  Component interactions after long-term operation of an SOFC stack with LSM cathode , 2012 .

[26]  A. Evans,et al.  Residual Stresses in Meta/Ceramic Bonded Strips , 1985 .

[27]  Recent advances in modeling stress distributions in multilayers subjected to biaxial flexure tests , 2007 .