Comparison of oil press for jatropha oil - A review

Siregar A.N., Ghani J.A., Haron C.H.C., Rizal M., Yaakob Z., Kamarudin S.K. (2015): Comparison of oil press for jatropha oil – a review. Res. Agr. Eng., 61: 1–13. As petrol will soon be exhausted in the near future, Jatropha is going to be one of the substitute candidates for future biodiesel production. Countries of South-East Asia, such as Malaysia, they are going to start the establishment of Jatropha plantations assuming that Jatropha will be the main resource for biodiesel production. A press is commonly used to extract oils from Jatropha. An oil press can be manually driven or engine-powered. In this paper, we will review some available advances focused on mechanical extraction techniques, covering three types of press for Jatropha oil extraction. We have found that major points like operating principles, oil extraction levels, advantages and disadvantages of each press and important factors to increase oil recovery. Based on the study, three types of press are: ram press, which is ineffective; strainer press, which is able to produce more oil than others and cylinder-hole press, which is the best due to its capacity in extracting oil from Jatropha seeds for about 89.4% of oil yields.

[1]  P. K. Jaiwal,et al.  Sesame (Sesamum indicum L.). , 2015, Methods in molecular biology.

[2]  M. Benge,et al.  Assessment of the potential of Jatropha curcas, (biodiesel tree,) for energy production and other uses in developing countries , 2006 .

[3]  Raphael M. Jingura.  Technical options for optimization of production of Jatropha as a biofuel feedstock in arid and semi-arid areas of Zimbabwe. , 2011 .

[4]  Dennis P. Wiesenborn,et al.  Screw pressing of whole and dehulled flaxseed for organic oil , 2003 .

[5]  K. Msaada,et al.  Extraction of coriander oil by twin-screw extruder: Screw configuration and operating conditions effect , 2012 .

[6]  E. Voutsas,et al.  Extraction of parsley seed oil by supercritical CO2 , 2004 .

[7]  O. K. Owolarafe,et al.  Comparative evaluation of the digester–screw press and a hand-operated hydraulic press for palm fruit processing , 2002 .

[8]  Johan P.M. Sanders,et al.  Jatropha seed protein functional properties for technical applications , 2011 .

[9]  P. C. Bargale,et al.  Development of a small capacity double stage compression screw press for oil expression , 2000 .

[10]  Ha Henny Romijn,et al.  The Jatropha biofuels sector in Tanzania 2005-9 : evolution towards sustainability? , 2011 .

[11]  N.S.L. Srivastava,et al.  SPRERI experience on holistic approach to utilize all parts of Jatropha curcas fruit for energy , 2008 .

[12]  J. van Eijck,et al.  Transition towards Jatropha biofuels in Tanzania? : an analysis with strategic niche management , 2007 .

[13]  Christophe Gourdon,et al.  A one dimensional model for the prediction of extraction yields in a two phases modified twin-screw extruder , 2002 .

[14]  S. Wani,et al.  Biology and genetic improvement of Jatropha curcas L.: A review , 2010 .

[15]  Tetsuya Araki,et al.  Yield and physicochemical properties of mechanically extracted crude Jatropha curcas L oil , 2012 .

[16]  A. Warra.  Sesame ( Sesamum indicum L.) Seed Oil Methods of Extraction and its Prospects in Cosmetic Industry: A Review , 2012 .

[17]  Robert Lee.  Biodiesel production from jatropha oil and its characterization , 2011 .

[18]  Supakit Sayasoonthorn,et al.  Rice Bran Oil Extraction by Screw Press Method: Optimum Operating Settings, Oil Extraction Level and Press Cake Appearance , 2012 .

[19]  B. Swallow,et al.  Jatropha curcas biodiesel production in Kenya: economics and potential value chain development for smallholder farmers , 2007 .

[20]  L. Rigal,et al.  Factors influencing the alkaline extraction of poplar hemicelluloses in a twin-screw reactor: correlation with specific mechanical energy and residence time distribution of the liquid phase. , 2000 .

[21]  Lyn Bates.  Guide to the Design, Selection, and Application of Screw Feeders , 2008 .

[22]  O. B. Aluko,et al.  A wear testing rig for rapid comparative evaluation of maintenance materials for some oilseed screw press components , 2002 .

[23]  J. Uziak,et al.  Performance Evaluation of Commonly Used Oil Ram Press Machines , 2007 .

[24]  L. Rigal,et al.  A twin-screw extruder for oil extraction: I. Direct expression of oleic sunflower seeds , 1999 .

[25]  L. Das,et al.  Combustion analysis of Jatropha, Karanja and Polanga based biodiesel as fuel in a diesel engine , 2009 .

[26]  K. Pramanik.  Properties and use of jatropha curcas oil and diesel fuel blends in compression ignition engine , 2003 .

[27]  E. Akintayo.  Characteristics and composition of Parkia biglobbossa and Jatropha curcas oils and cakes. , 2004, Bioresource technology.

[28]  Virendra Kumar Vijay,et al.  Oil expression from Jatropha seeds using a screw press expeller. , 2011 .

[29]  R. Jongschaap,et al.  Claims and facts on Jatropha curcas L. : global Jatropha curcas evaluation. breeding and propagation programme , 2007 .

[30]  K. Becker,et al.  Jatropha platyphylla, a new non-toxic Jatropha species: physical properties and chemical constituents including toxic and antinutritional factors of seeds. , 2011 .

[31]  Shiying Xu,et al.  Aqueous enzymatic extraction of peanut oil and protein hydrolysates , 2010 .

[32]  Peter Fellows,et al.  Setting up and running a small-scale cooking oil business , 2012 .

[33]  Shkelqim Karaj,et al.  Optimizing mechanical oil extraction of Jatropha curcas L. seeds with respect to press capacity, oil recovery and energy efficiency. , 2011 .

[34]  Stanislaus Antony Ceasar,et al.  Applications of biotechnology and biochemical engineering for the improvement of Jatropha and Biodiesel: A review , 2011 .

[35]  F. Temelli,et al.  Supercritical CO 2 Extraction of Flaxseed , 2022 .

[36]  May Ying Koh,et al.  A review of biodiesel production from Jatropha curcas L. oil , 2011 .

[37]  Pierre-Yves Pontalier,et al.  Oil extraction of oleic sunflower seeds by twin screw extruder: influence of screw configuration and operating conditions , 2005 .

[38]  Xiao Dong Chen,et al.  Ultrasound-assisted extraction of oil from flaxseed , 2008 .

[39]  J. Jongh.  Jatropha curcas oil production for local development in Mozambique , 2009 .

[40]  C. Mapiye,et al.  Effect of supplementing a high-protein ram press sunflower cake concentrate on smallholder milk production in Zimbabwe , 2007, Tropical Animal Health and Production.

[41]  Hui Wang,et al.  Extraction of Oil from Jatropha Seeds , 2011 .

[42]  Ha Henny Romijn,et al.  Jatropha assessment : agronomy, socio-economic issues and ecology, facts from literature , 2010 .

[43]  Philippe Evon,et al.  Manufacturing of renewable and biodegradable fiberboards from cake generated during biorefinery of sunflower whole plant in twin-screw extruder: Influence of thermo-pressing conditions , 2012 .

[44]  Pierrick Bouffaron,et al.  Straight vegetable oil from Jatropha curcas L. for rural electrification in Mali – A techno-economic assessment , 2012 .

[45]  Seed oil extraction using a solar powered screw press , 2007 .

[46]  Z. Mavunganidze,et al.  Potential of Jatropha Curcas in Improving Smallholder Farmers' Livelihoods in Zimbabwe: An Exploratory Study of Makosa Ward, Mutoko District , 2006 .

[47]  Haji Hassan Masjuki,et al.  Prospects of biodiesel from Jatropha in Malaysia , 2012 .

[48]  L. Verchot,et al.  Jatropha bio-diesel production and use , 2008 .

[49]  Aparna Sharma,et al.  Extraction of oil from Jatropha curcas L. seed kernels by enzyme assisted three phase partitioning , 2004 .

[50]  Shashi Kumar Jain,et al.  Sustainability issues for promotion of Jatropha biodiesel in Indian scenario: A review , 2012 .

[51]  Lode Messemaker.  The Green Myth? Assessment of the Jatropha value chain and its potential for pro-poor biofuel development in Northern Tanzania , 2008 .

[52]  P. Ribotta,et al.  Chia (Salvia hispanica L.) oil extraction: Study of processing parameters , 2012 .

[53]  Laura Vang Rasmussen,et al.  Impacts of Jatropha-based biodiesel production on above and below-ground carbon stocks: A case study from Mozambique , 2012 .

[54]  F. K. Forson,et al.  Performance of jatropha oil blends in a diesel engine , 2004 .

[55]  Richard Brittaine,et al.  Jatropha: a smallholder bioenergy crop: the potential for pro-poor development. , 2010 .

[56]  Lee Keat Teong,et al.  Comparative exergy analyses of Jatropha curcas oil extraction methods: Solvent and mechanical extraction processes , 2012 .

[57]  D. Wiesenborn,et al.  Influence of moisture content and cooking on screw pressing of crambe seed , 2002 .

[58]  L. Adekoya,et al.  Development of a laboratory model screw press for peanut oil expression , 2004 .

[59]  Zhi Yun,et al.  Preparation of biodiesel from Jatropha curcas L. oil produced by two-phase solvent extraction. , 2010, Bioresource technology.

[60]  Marcello Basili,et al.  Biofuel from Jatrofa Curcas: environmental sustainability and option value , 2012 .

[61]  Bukaza Chachage,et al.  Jatropha Oil as a Renewable Fuel for Road Transport Policy implications for technology transfer in Tanzania , 2003 .

[62]  A. M. Okeyo,et al.  AGRICULTURAL TECHNOLOGY, ECONOMIC VIABILITY AND POVERTY ALLEVIATION IN KENYA , 1999 .

[63]  S. Naik,et al.  Design, development and testing of hand-operated decorticator for Jatropha fruit , 2010 .

[64]  K. Openshaw.  A review of Jatropha curcas: an oil plant of unfulfilled promise☆ , 2000 .

[65]  Flemming Nielsen.  Lessons Learned: Jatropha for local development , 2011 .

[66]  I. Wardana.  Combustion characteristics of jatropha oil droplet at various oil temperatures , 2010 .