Impact of Monovalent Cation Halide Additives on the Structural and Optoelectronic Properties of CH3NH3PbI3 Perovskite

The influence of monovalent cation halide additives on the optical, excitonic, and electrical properties of CH3NH3PbI3 perovskite is reported. Monovalent cation halide with similar ionic radii to Pb2+, including Cu+, Na+, and Ag+, have been added to explore the possibility of doping. Significant reduction of sub‐bandgap optical absorption and lower energetic disorder along with a shift in the Fermi level of the perovskite in the presence of these cations has been observed. The bulk hole mobility of the additive‐based perovskites as estimated using the space charge limited current method exhibits an increase of up to an order of magnitude compared to the pristine perovskites with a significant decrease in the activation energy. Consequentially, enhancement in the photovoltaic parameters of additive‐based solar cells is achieved. An increase in open circuit voltage for AgI (≈1.02 vs 0.95 V for the pristine) and photocurrent density for NaI‐ and CuBr‐based solar cells (≈23 vs 21 mA cm−2 for the pristine) has been observed. This enhanced photovoltaic performance can be attributed to the formation of uniform and continuous perovskite film, better conversion, and loading of perovskite, as well as the enhancement in the bulk charge transport along with a minimization of disorder, pointing towards possible surface passivation.

[1]  H. Butt,et al.  Yttrium-substituted nanocrystalline TiO₂ photoanodes for perovskite based heterojunction solar cells. , 2014, Nanoscale.

[2]  R. Friend,et al.  Preparation of Single-Phase Films of CH3NH3Pb(I1-xBrx)3 with Sharp Optical Band Edges. , 2014, The journal of physical chemistry letters.

[3]  Laura M Herz,et al.  Homogeneous Emission Line Broadening in the Organo Lead Halide Perovskite CH3NH3PbI3-xClx. , 2014, The journal of physical chemistry letters.

[4]  Nam-Gyu Park,et al.  Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells. , 2014, Nature nanotechnology.

[5]  Bianca C. Datta,et al.  Substitutional doping in nanocrystal superlattices , 2015, Nature.

[6]  Peng Gao,et al.  Mixed-organic-cation perovskite photovoltaics for enhanced solar-light harvesting. , 2014, Angewandte Chemie.

[7]  Martin Schreyer,et al.  Synthesis and crystal chemistry of the hybrid perovskite (CH3NH3) PbI3 for solid-state sensitised solar cell applications , 2013 .

[8]  Sidney R. Cohen,et al.  Electronically active layers and interfaces in polycrystalline devices: Cross-section mapping of CdS/CdTe solar cells , 2003 .

[9]  Guangda Niu,et al.  Review of recent progress in chemical stability of perovskite solar cells , 2015 .

[10]  Mercouri G Kanatzidis,et al.  Anomalous band gap behavior in mixed Sn and Pb perovskites enables broadening of absorption spectrum in solar cells. , 2014, Journal of the American Chemical Society.

[11]  Qingfeng Dong,et al.  Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals , 2015, Science.

[12]  Henry J. Snaith,et al.  Efficient planar heterojunction perovskite solar cells by vapour deposition , 2013, Nature.

[13]  M. Grätzel,et al.  Photovoltaic and Amplified Spontaneous Emission Studies of High‐Quality Formamidinium Lead Bromide Perovskite Films , 2016 .

[14]  T. Ma,et al.  CH3NH3SnxPb(1-x)I3 Perovskite Solar Cells Covering up to 1060 nm. , 2014, The journal of physical chemistry letters.

[15]  Sung-Hoon Lee,et al.  The Role of Intrinsic Defects in Methylammonium Lead Iodide Perovskite. , 2014, The journal of physical chemistry letters.

[16]  Young Chan Kim,et al.  Compositional engineering of perovskite materials for high-performance solar cells , 2015, Nature.

[17]  Yossi Rosenwaks,et al.  Why lead methylammonium tri-iodide perovskite-based solar cells require a mesoporous electron transporting scaffold (but not necessarily a hole conductor). , 2014, Nano letters.

[18]  Konrad Wojciechowski,et al.  A one-step low temperature processing route for organolead halide perovskite solar cells. , 2013, Chemical communications.

[19]  J. Noh,et al.  Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells. , 2013, Nano letters.

[20]  Sergei Tretiak,et al.  High-efficiency solution-processed perovskite solar cells with millimeter-scale grains , 2015, Science.

[21]  Christophe Ballif,et al.  Organometallic Halide Perovskites: Sharp Optical Absorption Edge and Its Relation to Photovoltaic Performance. , 2014, The journal of physical chemistry letters.

[22]  Kangning Liang,et al.  Synthesis and Characterization of Organic−Inorganic Perovskite Thin Films Prepared Using a Versatile Two-Step Dipping Technique , 1998 .

[23]  N. Park,et al.  Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9% , 2012, Scientific Reports.

[24]  Kai Zhu,et al.  Room-temperature crystallization of hybrid-perovskite thin films via solvent–solvent extraction for high-performance solar cells , 2015 .

[25]  Mohammad Khaja Nazeeruddin,et al.  Real-space observation of unbalanced charge distribution inside a perovskite-sensitized solar cell , 2014, Nature Communications.

[26]  Yang Yang,et al.  Interface engineering of highly efficient perovskite solar cells , 2014, Science.

[27]  E. Meyer,et al.  The role of the cantilever in Kelvin probe force microscopy measurements , 2011, Beilstein journal of nanotechnology.

[28]  M. Grätzel,et al.  Understanding the Impact of Bromide on the Photovoltaic Performance of CH3NH3PbI3 Solar Cells , 2015, Advanced materials.

[29]  H. K. Wickramasinghe,et al.  Kelvin probe force microscopy , 1991 .

[30]  Xi Chen,et al.  Rise to modern levels of ocean oxygenation coincided with the Cambrian radiation of animals , 2015, Nature Communications.

[31]  M. Grätzel,et al.  Sequential deposition as a route to high-performance perovskite-sensitized solar cells , 2013, Nature.

[32]  Timothy L. Kelly,et al.  Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques , 2013, Nature Photonics.

[33]  J. J. Gallardo,et al.  New insights into organic-inorganic hybrid perovskite CH₃NH₃PbI₃ nanoparticles. An experimental and theoretical study of doping in Pb²⁺ sites with Sn²⁺, Sr²⁺, Cd²⁺ and Ca²⁺. , 2015, Nanoscale.

[34]  S. Patil,et al.  Room-temperature bandlike transport and Hall effect in a high-mobility ambipolar polymer , 2014, 1411.0371.

[35]  Sang Il Seok,et al.  High-performance photovoltaic perovskite layers fabricated through intramolecular exchange , 2015, Science.

[36]  Neha Arora,et al.  Investigation regarding the role of chloride in organic-inorganic halide perovskites obtained from chloride containing precursors. , 2014, Nano letters.

[37]  Jun Lin,et al.  Layered organic-inorganic hybrid perovskites: structure, optical properties, film preparation, patterning and templating engineering , 2010 .

[38]  M. Al‐Jassim,et al.  Direct evidence of a buried homojunction in Cu(In,Ga)Se2 solar cells , 2003 .

[39]  M. Grätzel,et al.  Growth Engineering of CH3NH3PbI3 Structures for High‐Efficiency Solar Cells , 2016 .

[40]  J. Teuscher,et al.  Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites , 2012, Science.

[41]  E. Sargent,et al.  Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals , 2015, Science.

[42]  M. Green,et al.  The emergence of perovskite solar cells , 2014, Nature Photonics.

[43]  Laura M. Herz,et al.  Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber , 2013, Science.

[44]  Yossi Rosenwaks,et al.  The electronic structure of metal oxide/organo metal halide perovskite junctions in perovskite based solar cells , 2015, Scientific Reports.

[45]  Tsutomu Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.

[46]  A. L. Patterson.  The Scherrer Formula for X-Ray Particle Size Determination , 1939 .