A New Synchronous Current Regulator and an Analysis of Current-Regulated PWM Inverters

Detailed models are presented for the stationary and synchronous sine-triangle current regulators. Analytical and test results are compared for purposes of model verification and regulator evaluation. The results demonstrate the limitations of the two most often used current regulators and the robustness of the synchronous current regulator. The stationary sine-triangle and hysteretic current regulators are shown to have steady-state characteristics that depend on slip, operating frequency, and motor impedance. In contrast the synchronous regulator, because it lacks these dependencies, exhibits ideal steady-state current regulator characteristics without sacrificing bandwidth. Moreover, the complexities traditionally associated with the synchronous regulator are overcome with a simple equivalent implementation.

[1]  Rupprecht Gabriel,et al.  Field-Oriented Control of a Standard AC Motor Using Microprocessors , 1980, IEEE Transactions on Industry Applications.

[2]  Hiroshi Nagase,et al.  High-Performance Induction Motor Drive System Using a PWM Inverter , 1984, IEEE Transactions on Industry Applications.

[3]  Luis J. Garces Parameter Adaption for the Speed-Controlled Static AC Drive with a Squirrel-Cage Induction Motor , 1980, IEEE Transactions on Industry Applications.

[4]  Donald W. Novotny,et al.  Current Control of VSI-PWM Inverters , 1985, IEEE Transactions on Industry Applications.

[5]  Colin D. Schauder,et al.  Current Control of Voltage-Source Inverters for Fast Four-Quadrant Drive Performance , 1982, IEEE Transactions on Industry Applications.

[6]  Thomas A. Lipo,et al.  Stability Analysis of a Symmetrical Induction Machine , 1969 .

[7]  Toshikatsu Sonoda,et al.  Reliability of Induction Machines for High Performance Based on Parameter Characteristics , 1985, IEEE Transactions on Industry Applications.

[8]  Friedrich Loeser,et al.  Identification and Compensation of the Rotor Temperature of AC Drives by an Observer , 1985, IEEE Transactions on Industry Applications.

[9]  Kouhei Ohnishi,et al.  Decoupling Control of Secondary Flux and Secondary Current in Induction Motor Drive with Controlled Voltage Source and Its Comparison with Volts/Hertz Control , 1985, IEEE Transactions on Industry Applications.

[10]  Thomas A. Lipo,et al.  A Rotor Parameter Identification Scheme for Vector-Controlled Induction Motor Drives , 1985, IEEE Transactions on Industry Applications.

[11]  R. Krishnan,et al.  Study of Parameter Sensitivity in High-Performance Inverter-Fed Induction Motor Drive Systems , 1987, IEEE Transactions on Industry Applications.

[12]  W. Schumacher,et al.  Microprocessor-Controlled AC-Servo Drives with Synchronous or Induction Motors: Which is Preferable? , 1986, IEEE Transactions on Industry Applications.

[13]  A. Schonung,et al.  Static Frequency Changers with "Subharmonic" Control in Conjunction with Reversible Variable-Speed A.C.Drives , 1964 .

[14]  Thomas A. Lipo,et al.  A Novel Approach to Induction Motor Transfer Functions , 1974 .

[15]  Donald W. Novotny,et al.  The Influence of Motor Parameter Deviations in Feedforward Field Orientation Drive Systems , 1985, IEEE Transactions on Industry Applications.

[16]  Colin D. Schauder,et al.  High Performance Torque-Controlled Induction Motor Drives , 1983, IEEE Transactions on Industry Applications.