Identification and quantification of plastic additives using pyrolysis-GC/MS: A review.

[1]  A. Huvet,et al.  An Irgafos® 168 story: When the ubiquity of an additive prevents studying its leaching from plastics. , 2020, The Science of the total environment.

[2]  F. Modugno,et al.  Microwave-assisted solvent extraction and double-shot analytical pyrolysis for the quali-quantitation of plasticizers and microplastics in beach sand samples. , 2020, Journal of hazardous materials.

[3]  Maria Perla Colombini,et al.  Plastics in Heritage Science: Analytical Pyrolysis Techniques Applied to Objects of Design , 2020, Molecules.

[4]  Jochen F Mueller,et al.  Identification and quantification of selected plastics in biosolids by pressurized liquid extraction combined with double-shot pyrolysis gas chromatography-mass spectrometry. , 2020, The Science of the total environment.

[5]  M. Colombini,et al.  Synthetic materials in art: a new comprehensive approach for the characterization of multi-material artworks by analytical pyrolysis , 2019, Heritage Science.

[6]  F. Maruyama,et al.  Development of a screening method for phthalate esters in polymers using a quantitative database in combination with pyrolyzer/thermal desorption gas chromatography mass spectrometry. , 2019, Journal of chromatography. A.

[7]  Stephanie B. Borrelle,et al.  Rethinking microplastics as a diverse contaminant suite , 2019, Environmental toxicology and chemistry.

[8]  F. Maruyama,et al.  Verification of simultaneous screening for major restricted additives in polymer materials using pyrolyzer/thermal desorption gas–chromatography mass spectrometry (Py/TD-GC-MS) , 2019, Journal of Analytical and Applied Pyrolysis.

[9]  M. Colombini,et al.  A pyrolysis approach for characterizing and assessing degradation of polyurethane foam in cultural heritage objects , 2018, Journal of Analytical and Applied Pyrolysis.

[10]  P. Soudant,et al.  Optimization, performance, and application of a pyrolysis-GC/MS method for the identification of microplastics , 2018, Analytical and Bioanalytical Chemistry.

[11]  F. Maruyama,et al.  Simultaneous Screening of Major Flame Retardants and Plasticizers in Polymer Materials Using Pyrolyzer/Thermal Desorption Gas Chromatography Mass Spectrometry (Py/TD–GC–MS) , 2018, Molecules.

[12]  Roland Weber,et al.  An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling. , 2018, Journal of hazardous materials.

[13]  H. Karapanagioti,et al.  Chapter 8 – Advanced Analytical Techniques for Assessing the Chemical Compounds Related to Microplastics , 2017 .

[14]  J. Okonkwo,et al.  Occurrence and distribution of tetrabromobisphenol A and its derivative in river sediments from Vaal River Catchment, South Africa , 2017 .

[15]  J. González-Pérez,et al.  Pyrolysis-gas chromatography-isotope ratio mass spectrometry for monitoring natural additives in polylactic acid active food packages. , 2017, Journal of chromatography. A.

[16]  A. ter Halle,et al.  Nanoplastic in the North Atlantic Subtropical Gyre. , 2017, Environmental science & technology.

[17]  Young‐Kwon Park,et al.  Rapid Quantification of N-Methyl-2-pyrrolidone in Polymer Matrices by Thermal Desorption-GC/MS. , 2017, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[18]  B. Scholz-Böttcher,et al.  Simultaneous Trace Identification and Quantification of Common Types of Microplastics in Environmental Samples by Pyrolysis-Gas Chromatography-Mass Spectrometry. , 2017, Environmental science & technology.

[19]  E. Choe,et al.  Comparative study of thermal desorption and solvent extraction-gas chromatography-mass spectrometric analysis for the quantification of phthalates in polymers. , 2016, Journal of chromatography. A.

[20]  S. Net,et al.  Reliable quantification of phthalates in environmental matrices (air, water, sludge, sediment and soil): a review. , 2015, The Science of the total environment.

[21]  A. Watanabe,et al.  Polymer-coated sample cup for quantitative analysis of semi-volatile phthalates in polymeric materials by thermal desorption-gas chromatography-mass spectrometry. , 2015, Journal of chromatography. A.

[22]  F. Maruyama,et al.  Screening of phthalates in polymer materials by pyrolysis GC/MS. , 2015, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[23]  C. Rochman.  The Complex Mixture, Fate and Toxicity of Chemicals Associated with Plastic Debris in the Marine Environment , 2015 .

[24]  S. Derenne,et al.  Analytical pyrolysis as a tool to probe soil organic matter , 2015 .

[25]  Jörg Klasmeier,et al.  Occurrence and spatial distribution of microplastics in sediments from Norderney. , 2014, Environmental pollution.

[26]  Martin Ebert,et al.  Identification of polymer types and additives in marine microplastic particles using pyrolysis-GC/MS and scanning electron microscopy. , 2013, Environmental science. Processes & impacts.

[27]  Jürgen Odermatt,et al.  Detection and quantification of traces of bisphenol A and bisphenol S in paper samples using analytical pyrolysis-GC/MS. , 2012, The Analyst.

[28]  J. González-Pérez,et al.  Detection of organic contamination in sediments by double-shoot pyrolysis–GC/MS , 2009 .

[29]  S. Trimpin,et al.  Rapid methods of polymer and polymer additives identification: multi-sample solvent-free MALDI, pyrolysis at atmospheric pressure, and atmospheric solids analysis probe mass spectrometry. , 2009, Analytica chimica acta.

[30]  S. Tsuge,et al.  Rapid and simple determination of phthalates in plastic toys by a thermal desorption-GC/MS method. , 2009, Analytical Sciences.

[31]  Richard C. Thompson,et al.  Transport and release of chemicals from plastics to the environment and to wildlife , 2009, Philosophical Transactions of the Royal Society B: Biological Sciences.

[32]  J. Simal-Gándara,et al.  A Review of Synthetic Polymer Characterization by Pyrolysis–GC–MS , 2009 .

[33]  B. Sithole,et al.  Determination of nonylphenol and nonylphenol ethoxylates in pulp samples by Py-GC/MS. , 2009 .

[34]  S. Tsuge,et al.  Evaluation of the thermal desorption-GC/MS method for the determination of decabromodiphenyl ether (DeBDE) in order of a few hundred ppm contained in a certified standard polystyrene sample. , 2008, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[35]  W. Den,et al.  Analysis of trace contamination of phthalate esters in ultrapure water using a modified solid-phase extraction procedure and automated thermal desorption-gas chromatography/mass spectrometry. , 2008, Journal of chromatography. A.

[36]  M. Baron,et al.  Recent trends and developments in pyrolysis-gas chromatography. , 2008, Journal of chromatography. A.

[37]  R. Bossi,et al.  Method development for simultaneous analysis of HBCD, TBBPA, and dimethyl-TBBPA in marine biota from Greenland and the Faroe Islands , 2007 .

[38]  A. González-Casado,et al.  Principles of analytical calibration/quantification for the separation sciences. , 2007, Journal of chromatography. A.

[39]  T. Wampler,et al.  Determination of polymer additives using analytical pyrolysis , 2007 .

[40]  S. Derenne,et al.  Double-shot pyrolysis of the non-hydrolysable organic fraction isolated from a sandy forest soil (Landes de Gascogne, South-West France) Comparison with classical Curie point pyrolysis , 2006 .

[41]  S. Tsuge,et al.  Rapid determination of decabromodiphenyl ether in polystyrene by thermal desorption-GC/MS. , 2005, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[42]  H. Bai,et al.  Direct quantitative analysis of phthalate esters as micro-contaminants in cleanroom air and wafer surfaces by auto-thermal desorption--gas chromatography--mass spectrometry. , 2005, Journal of chromatography. A.

[43]  A. Kettrup,et al.  Fast identification of polymer additives by pyrolysis-gas chromatography/mass spectrometry , 2003 .

[44]  D. Meier,et al.  Approaches to applying internal standards for the quantification of paper additives by Py-GC/MSD , 2003 .

[45]  John M. Challinor,et al.  Review: the development and applications of thermally assisted hydrolysis and methylation reactions , 2001 .

[46]  C. Watanabe,et al.  Determination of Residual Solvents in Pharmaceuticals by Thermal Desorption-GC/MS , 2001, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[47]  J. Bart.  Polymer/additive analysis by flash pyrolysis techniques , 2001 .

[48]  J. C. Río,et al.  Characterisation and differentiation of kerogens by pyrolytic and chemical degradation techniques , 2001 .

[49]  F. Wang.  Polymer additive analysis by pyrolysis-gas chromatography. IV. Antioxidants. , 2000, Journal of chromatography. A.

[50]  F. Wang.  Polymer additive analysis by pyrolysis-gas chromatography. II. Flame retardants. , 2000, Journal of chromatography. A.

[51]  F. Wang.  Polymer additive analysis by pyrolysis-gas chromatography. I. Plasticizers. , 2000, Journal of chromatography. A.

[52]  M. Riess,et al.  Identification of flame retardants in polymers using curie point pyrolysis-gas chromatography/mass spectrometry , 2000 .

[53]  N. Manabe,et al.  Determination of a hindered phenol-type antioxidant by pyrolysis-GC/MS in the presence of tetramethyl ammonium hydroxide. , 1999 .

[54]  E. Barry,et al.  Novel pyrolysis-gas chromatography/mass spectrometric techniques for the characterization of chemical additives in portland cement and concrete , 1998 .

[55]  A. Venema,et al.  In-situ hydrolysis/methylation pyrolysis CGC for the characterization of polyaramides , 1995 .

[56]  G. Patonay,et al.  Pyrolytic analysis of complex stabilizers in polypropylene , 1990 .

[57]  J. Challinor.  A pyrolysis-derivatisation-gas chromatography technique for the structural elucidation of some synthetic polymers , 1989 .

[58]  P. Orme,et al.  Determination of polymeric hindered-amine light stabilisers in plastics by pyrolysis—gas chromatography , 1985 .

[59]  N. Lichtenstein,et al.  Analyse von 2,6-Di-tert.butyl-p-kresol in Butadien/Styrol-Copolymeren durch Curie-Punkt-Pyrolyse/GC/MS , 1983 .