The effect of tube bending, heat treatment and loading paths on process responses of hydroforming for automobile intercooler pipe: numerical and experimental investigations

This study was carried out to investigate the effect of preliminary processes on tube hydroforming (THF) and to optimize the THF process parameters to achieve a sound complex 3D curved intercooler pipe without failure by numerical and experimental approaches. The effect of three-step rotary bending on the thickness distribution and microstructure of the tube has been evaluated. The necessity of heat treatment is analyzed prior to the THF process. The stroke of punches should be optimized separately according to the asymmetry geometry characteristics of the intercooler pipe. The suitable loading path is discussed during the THF process. The results obtained from simulation keep a reasonable agreement with that from the experiment.

[1]  Shi-Hong Zhang,et al.  Developments in hydroforming , 1999 .

[2]  Shi-Hong Zhang,et al.  Numerical and experimental study on large deformation of thin-walled tube through hydroforging process , 2016 .

[3]  Liu Hongbing,et al.  Investigation on the maximum thinning and protrusion height of the hydroformed 316L SS/Al clad T-branch , 2014 .

[4]  M. Kadkhodayan,et al.  An investigation of the optimal load paths for the hydroforming of T-shaped tubes , 2012 .

[5]  Kristoffer Trana,et al.  Finite element simulation of the tube hydroforming process—bending, preforming and hydroforming , 2002 .

[6]  Xizhang Chen,et al.  Monte Carlo simulation and experimental measurements of grain growth in the heat affected zone of 304 stainless steel during multipass welding , 2015 .

[7]  B. Guo,et al.  Ultraprecision grinding of TiC-based cermet hemisphere couples , 2014 .

[8]  Bo Yang,et al.  Analysis and finite element simulation of the tube bulge hydroforming process , 2006 .

[9]  Hong-wu Song,et al.  In situ X-ray diffraction study of martensitic transformation in austenitic stainless steel during cyclic tensile loading and unloading , 2012 .

[10]  Wenyu Yang,et al.  Analytical modelling of microstructure changes in the machining of 304 stainless steel , 2012 .

[11]  Mario Fafard,et al.  Global optimisation of the production of complex aluminium tubes by the hydroforming process , 2015 .

[12]  A. Alper Ozalp,et al.  Numerical modeling of the momentum and thermal characteristics of air flow in the intercooler connection hose , 2012 .

[13]  M. Parsa,et al.  Bending of Work Hardening Sheet Metals subjected to Tension , 2008 .

[14]  Taylan Altan,et al.  Tube hydroforming: state-of-the-art and future trends , 2000 .

[15]  Hong-wu Song,et al.  Formability improvement of austenitic stainless steel by pulsating hydroforming , 2015 .

[16]  Liuan Wang,et al.  Hydroforming simulation and experiment of clad T-shapes , 2016 .

[17]  F. Dohmann,et al.  Hydroforming - a method to manufacture light-weight parts , 1996 .

[18]  Soo-Ik Oh,et al.  The tube bending technology of a hydroforming process for an automotive part , 2001 .

[19]  Matteo Strano,et al.  FEM analysis of tube pre-bending and hydroforming , 2004 .

[20]  Hong-wu Song,et al.  The enhancement of transformation induced plasticity effect on austenitic stainless steels by cyclic tensile loading and unloading , 2011 .