High‐Efficiency Inverted Polymer Photovoltaics via Spectrally Tuned Absorption Enhancement

[1]  Mario Leclerc,et al.  Processable Low-Bandgap Polymers for Photovoltaic Applications† , 2011 .

[2]  Karl Leo,et al.  Efficiency Enhancement of Organic Solar Cells by Fabricating Periodic Surface Textures using Direct Laser Interference Patterning , 2012, Advanced materials.

[3]  A. Facchetti,et al.  Fluorinated copper phthalocyanine nanowires for enhancing interfacial electron transport in organic solar cells. , 2012, Nano letters.

[4]  Federico Capasso,et al.  Nanometre optical coatings based on strong interference effects in highly absorbing media. , 2013, Nature materials.

[5]  W. J. Beek,et al.  Efficient Hybrid Solar Cells from Zinc Oxide Nanoparticles and a Conjugated Polymer , 2004 .

[6]  K. S. Narayan,et al.  Fill factor in organic solar cells , 2010 .

[7]  Yanming Sun,et al.  Inverted Polymer Solar Cells Integrated with a Low‐Temperature‐Annealed Sol‐Gel‐Derived ZnO Film as an Electron Transport Layer , 2011, Advanced materials.

[8]  L. Brillson.  Metal-semiconductor interfaces , 1994 .

[9]  Paul Heremans,et al.  Design of Transparent Anodes for Resonant Cavity Enhanced Light Harvesting in Organic Solar Cells , 2012, Advanced materials.

[10]  Edward H. Sargent,et al.  Materials interface engineering for solution-processed photovoltaics , 2012, Nature.

[11]  Resonant cavity enhanced light harvesting in flexible thin-film organic solar cells. , 2013, Optics letters.

[12]  Mark A. Ratner,et al.  Organic solar cells: A new look at traditional models , 2011 .

[13]  Jae Won Lee,et al.  Humidity-dependent characteristics of thin film poly(3,4-ethylenedioxythiophene) field-effect transistor , 2005 .

[14]  Robert A. Street,et al.  Interface state recombination in organic solar cells , 2010 .

[15]  Guillermo C Bazan,et al.  Pyridalthiadiazole-based narrow band gap chromophores. , 2012, Journal of the American Chemical Society.

[16]  H. Hahn,et al.  Transparent nanocrystalline ZnO films prepared by spin coating , 2005 .

[17]  Weiwei Li,et al.  Efficient Small Bandgap Polymer Solar Cells with High Fill Factors for 300 nm Thick Films , 2013, Advanced materials.

[18]  A. Heeger,et al.  Improved light harvesting and improved efficiency by insertion of an optical spacer (ZnO) in solution-processed small-molecule solar cells. , 2013, Nano letters.

[19]  Gang Li,et al.  Recent Progress in Polymer Solar Cells: Manipulation of Polymer:Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar Cells , 2009 .

[20]  Alex K.-Y. Jen,et al.  Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells , 2012 .

[21]  Valentin D. Mihailetchi,et al.  Thickness dependence of the efficiency of polymer:fullerene bulk heterojunction solar cells , 2006 .

[22]  Moon J. Kim,et al.  Degradation of a thin Ag layer induced by poly(3,4-ethylenedioxythiophene):polystyrene sulfonate in a transmission electron microscopy specimen of an inverted polymer solar cell. , 2012, ACS applied materials & interfaces.

[23]  Yang Yang,et al.  Polymer solar cells with enhanced open-circuit voltage and efficiency , 2009 .

[24]  Bruce A. Parkinson,et al.  Orbital Alignment and Morphology of Pentacene Deposited on Au(111) and SnS2 Studied Using Photoemission Spectroscopy , 2003 .

[25]  Stelios A. Choulis,et al.  Thermal degradation mechanisms of PEDOT:PSS , 2009 .

[26]  Christoph J. Brabec,et al.  Production Aspects of Organic Photovoltaics and Their Impact on the Commercialization of Devices , 2005 .

[27]  Martin A. Green,et al.  Solar Energy Conversion Toward 1 Terawatt , 2008 .

[28]  J. Yates,et al.  Band bending in semiconductors: chemical and physical consequences at surfaces and interfaces. , 2012, Chemical reviews.

[29]  Yongbing Long.  Effects of metal electrode reflection and layer thicknesses on the performance of inverted organic solar cells , 2010 .

[30]  Michael D. McGehee,et al.  Polymer-based solar cells , 2007 .

[31]  Sean E. Shaheen,et al.  Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer , 2006 .

[32]  Xiong Gong,et al.  New Architecture for High‐Efficiency Polymer Photovoltaic Cells Using Solution‐Based Titanium Oxide as an Optical Spacer , 2006 .

[33]  R. Blanchard,et al.  Thin-Film Interference in Lossy, Ultra-Thin Layers , 2014 .

[34]  Christoph J. Brabec,et al.  Realization, characterization, and optical modeling of inverted bulk-heterojunction organic solar cells , 2008 .

[35]  L. S. Roman,et al.  Modeling photocurrent action spectra of photovoltaic devices based on organic thin films , 1999 .

[36]  Qiaoqiang Gan,et al.  Plasmonic‐Enhanced Organic Photovoltaics: Breaking the 10% Efficiency Barrier , 2013, Advanced materials.

[37]  Frederik C. Krebs,et al.  A brief history of the development of organic and polymeric photovoltaics , 2004 .

[38]  Alberto Salleo,et al.  Recombination in Polymer:Fullerene Solar Cells with Open‐Circuit Voltages Approaching and Exceeding 1.0 V , 2013 .

[39]  Gang Li,et al.  25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research , 2013, Advanced materials.

[40]  K. Meerholz,et al.  Minimizing optical losses in bulk heterojunction polymer solar cells , 2007 .

[41]  Stephen R. Forrest,et al.  The Limits to Organic Photovoltaic Cell Efficiency , 2005 .

[42]  Miao Xu,et al.  Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure , 2012, Nature Photonics.

[43]  T. Marks,et al.  Spectral aspects of cavity tuned absorption in organic photovoltaic films. , 2012, Optics express.

[44]  Hao Jiang,et al.  Texture design of electrodes for efficiency enhancement of organic solar cells , 2013 .

[45]  Vishal Shrotriya,et al.  Modeling optical effects and thickness dependent current in polymer bulk-heterojunction solar cells , 2006 .

[46]  O. Inganäs,et al.  Mobility and fill factor correlation in geminate recombination limited solar cells , 2011 .

[47]  Rene Lopez,et al.  Photonic Crystal Geometry for Organic Polymer:Fullerene Standard and Inverted Solar Cells , 2011 .

[48]  Jincheng Du,et al.  Workfunction tuning of zinc oxide films by argon sputtering and oxygen plasma: an experimental and computational study , 2012 .

[49]  Gang Li,et al.  For the Bright Future—Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4% , 2010, Advanced materials.

[50]  K. Seki,et al.  ENERGY LEVEL ALIGNMENT AND INTERFACIAL ELECTRONIC STRUCTURES AT ORGANIC/METAL AND ORGANIC/ORGANIC INTERFACES , 1999 .

[51]  J. Hummelen,et al.  Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.

[52]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[53]  Alex K.-Y. Jen,et al.  Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer , 2008 .

[54]  P. Peumans,et al.  Broadband optical absorption enhancement through coherent light trapping in thin-film photovoltaic cells. , 2008, Optics express.

[55]  Stephen R. Forrest,et al.  The path to ubiquitous and low-cost organic electronic appliances on plastic , 2004, Nature.

[56]  Rene Lopez,et al.  Absorption and quasiguided mode analysis of organic solar cells with photonic crystal photoactive layers. , 2009, Optics express.

[57]  Thomas Kirchartz,et al.  Understanding the Thickness-Dependent Performance of Organic Bulk Heterojunction Solar Cells: The Influence of Mobility, Lifetime, and Space Charge. , 2012, The journal of physical chemistry letters.

[58]  Robert P. H. Chang,et al.  Polymer solar cells with enhanced fill factors , 2013, Nature Photonics.

[59]  Alberto Salleo,et al.  Morphology‐Dependent Trap Formation in High Performance Polymer Bulk Heterojunction Solar Cells , 2011 .

[60]  W. Tang,et al.  Transition Metal Oxide Work Functions: The Influence of Cation Oxidation State and Oxygen Vacancies , 2012 .

[61]  Alan J. Heeger,et al.  Recombination in polymer-fullerene bulk heterojunction solar cells , 2010 .

[62]  H. Atwater,et al.  Plasmonics for improved photovoltaic devices. , 2010, Nature materials.