Steam reforming of tar compounds over Ni/olivine catalysts doped with CeO2

Biomass gasification is gaining attention as a route for biomass energy production. Producer gas from this process usually contains unacceptable levels of tar. Tar can cause operational problems in downstream processes by blocking gas coolers, filter elements and engine suction channels. Most producer gas applications require removal of at least part of the dust and tar before the gas can be used. In this study, olivine was used as a substrate for various catalyst formulations designed to steam reform tar to gas. Three catalysts were prepared by wet impregnation, yielding the following compositions: 3.0% NiO/olivine, 3.0% NiO/olivine doped with 1.0% CeO2 and 6.0% NiO/olivine. Benzene and toluene were selected as model compounds of biomass tar. Catalytic steam reforming of these compounds was performed in a bench scale fixed bed reactor at temperatures between 700 and 830 C using a molar ratio of steam/carbon (S/ C) equal to 5. The effect of catalyst composition on tar conversion and yields of various product gases were determined. Coking tendencies of the catalysts were determined, and characterization by XRD and SEM was performed. 3.0% NiO/olivine doped with 1.0% CeO2 was the most promising catalyst based on catalytic activity and its resistance to coking. 2006 Elsevier Ltd. All rights reserved.

[1]  J. Figueiredo.  Carbon Formation and Gasification on Nickel , 1982 .

[2]  R. González,et al.  The chemical anchoring of noble metal amine precursors to silica , 1992 .

[3]  D. Świerczyński,et al.  Hydrogen production from biomass gasification on nickel catalysts: Tests for dry reforming of methane , 2002 .

[4]  T. A. Milne,et al.  Biomass Gasifier "Tars": Their Nature, Formation, and Conversion , 1998 .

[5]  José Corella,et al.  Biomass gasification with air in fluidized bed : Reforming of the gas composition with commercial steam reforming Catalysts , 1998 .

[6]  Jesús Arauzo,et al.  Catalytic pyrogasification of biomass. Evaluation of modified nickel catalysts , 1997 .

[7]  C. Louis,et al.  In situ EXAFS study of the nucleation and crystal growth of Ni particles on SiO2 support , 1998 .

[8]  José Corella,et al.  Calcined Dolomite, Magnesite, and Calcite for Cleaning Hot Gas from a Fluidized Bed Biomass Gasifier with Steam: Life and Usefulness , 1996 .

[9]  L. Bonneviot,et al.  Role of oxide surface in coordination chemistry of transition metal ions in catalytic systems , 1988 .

[10]  J. Geus,et al.  Prevention of Growth of Filamentary Carbon in Supported iron and Nickel Catalysts. , 1987 .

[11]  Ian Narváez,et al.  Fresh Tar (from a Biomass Gasifier) Elimination over a Commercial Steam-Reforming Catalyst. Kinetics and Effect of Different Variables of Operation , 1997 .

[12]  Kj Krzysztof Ptasinski,et al.  A review of the primary measures for tar elimination in biomass gasification processes , 2003 .

[13]  J. Figueiredo.  Progress in Catalyst Deactivation , 1982 .

[14]  L. K. Mudge,et al.  Fundamentals of thermochemical biomass conversion , 1985 .

[15]  A. Bridgwater.  The technical and economic feasibility of biomass gasification for power generation , 1995 .

[16]  S. Rapagnà.  Steam-gasification of biomass in a fluidised-bed of olivine particles. , 2000 .

[17]  G. Olofsson,et al.  Catalytic Hot Gas Cleaning of Fuel Gas from an Air-Blown Pressurized Fluidized-Bed Gasifier , 2000 .

[18]  C. Courson,et al.  Grafted NiO on natural olivine for dry reforming of methane , 2002 .

[19]  I. Bjerle,et al.  Kinetics of Ammonia Decomposition in Hot Gas Cleaning , 1999 .

[20]  C. M. Kinoshita,et al.  Tar formation under different biomass gasification conditions , 1994 .

[21]  J. Corella,et al.  Biomass Gasification with Air in a Fluidized Bed: Effect of the In-Bed Use of Dolomite under Different Operation Conditions , 1999 .

[22]  Anthony V. Bridgwater,et al.  Developments in thermochemical biomass conversion , 1997 .

[23]  C. Courson,et al.  Development of Ni catalysts for gas production from biomass gasification. Reactivity in steam- and dry-reforming , 2000 .

[24]  Kj Krzysztof Ptasinski,et al.  Catalytic decomposition of biomass tars: use of dolomite and untreated olivine , 2005 .

[25]  E. G. Baker,et al.  The effect of catalysis on wood-gasification tar composition , 1986 .

[26]  Krister Sjöström,et al.  Fundamentals of Pressurized Gasification of Biomass , 1997 .

[27]  Tadashi Yoshida,et al.  Effect of coal particle size on the coal hydrogenation reaction — In relation to the plasticity of coal , 1980 .

[28]  G. Brem,et al.  Tar Removal in an Entrained Flow Cracker (EFC) with application to Biomass Gasification , 2002 .

[29]  B. Kelleher,et al.  Review of literature on catalysts for biomass gasification , 2001 .

[30]  Esa Kurkela,et al.  Air gasification of peat, wood and brown coal in a pressurized fluidized-bed reactor. I. Carbon conversion, gas yields and tar formation , 1992 .

[31]  A. Kiennemann,et al.  Stabilisation of active nickel catalysts in partial oxidation of methane to synthesis gas by iron addition , 1999 .

[32]  Jens R. Rostrup-Nielsen,et al.  Catalytic Steam Reforming , 1984 .